• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2003.10a
• /
• pp.209-212
• /
• 2003

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.334-341
• /
• 2006

This study designed to develop a mower which can reach to side of a tractor or inclined road side and operate weeding. The prototype consists of 4 parts; the base and turning equipment, the boom, the arm, the weeder. The hydraulic actuators were divided into two operations, weeding and operation of boom and they were controlled by electrical equipment. Weeding was very effective when pressure set up at $15{\ell}/min$ using weeding, as $2.27kg{\cdot}m$, 2,210rpm. Weeding range of flail mower was 1.1 to 2.6m from the center of turning equipment at a flat. In case of disk mower, it was 1.5 to 2m. As a result of operation test, flail mower was appropriate for weeding at fence and short weeds, disk mower was appropriate for long weeds.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.25 no.4
• /
• pp.69-79
• /
• 1983

The objective of this study is to analyze the present situation of compaction equipment used in the earth fill dam construction, and the compaction effects of varions types of equipment on core and pervious zones of the fill dam. The results obtained are summarized as follows; 1. Banking materials mostly used for the core zone were soils classified as CL, SC and ML, while those classified as SM, ML and SC were predominant for the pervious zone. 2. Equipments used practically in the real fields were considerably different from those specified in the designs. 3. It was found that the relationship between optimum water content and maximum dry density for both core and pervious materials showed to be linear, ranging from 10% to 25% water content. That is, ${\gamma}$dmax (core) = 2.2555-0.0284 Wopt ${\gamma}$dmax(pervious) =2.239-0.028 Wopt 4. The generalized compaction guides for all kinds of equipment and soil types consi- dered in this study may be recommended as N=8-10 T=2Ocm, N=10-12 T=3Ocm for core zone(98%) and N=6-8 T=2Ocm, N=8-10 T=3Ocm for pervious zone (95%). 5. The coefficient of permeability in the field tests showed abont 10 times as high as the laboratory test value. This large deviation, however, was due to the horizontal permeation and considered not to be significant in the light of the satisfactory compaction ratio in the field compac- tion.

• Agribusiness and Information Management
• /
• v.9 no.1
• /
• pp.18-22
• /
• 2017

It takes lots of time and labor if a worker have to measure the water quality at a certain but designated time every day in an un-automated aqua farm. In addition, if the equipment is soaked in the sea water consistently, it will be contaminated by diverse floating matters and barnacles, and it often becomes mal-functional within 2~3 months. Therefore, we need to develop a system with which the sensed data could be checked in real time and operated automatically, while preventing the contamination of the sensor, a crucial component for water quality measuring equipment, as much as possible, and increasing the replacement cycle. We have developed a non-cleaning water quality measuring equipment and its software which are used in the fishery household of offshore aqua farms. By providing the workers with a mobile application which has a function of monitoring the water quality in real time, they can check the situation directly without going to the fishery household.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.72-85
• /
• 2002

When the quality and cooking characteristics of wash free rice was compared with those of control milled rice during storage, smaller quality change during storage and more easy to cook was found in wash free rice than control. The wash free rice equipment manufactured in foreign country was carefully investigated and commercial wash free rice equipment with 1metric ton per hour capacity was made considering the characteristics of domestic rice cultivar. Modification of the equipment was made through the repeated field test, and the technique on wash free rice equipment was transferred to the RICETECH. These systems were manufactured in RICETECH will be exported of China next year.

• Journal of Environmental Health Sciences
• /
• v.43 no.1
• /
• pp.42-54
• /
• 2017

Objectives: The present study was conducted to investigate farm work environments among farmers and examine the level of management of safety and health, and to subsequently produce study result to serve as foundational data for the development of guidelines on safety and health as part of the improvement of farming work environments among farmers raising Korean native cattle. Methods: The present study conducted a survey on farm work environments and the management of safety and health with 407 farmers engaged in Korean native cattle farming in selected regions in eight provinces. It also visited 10 farmers to verify the current status of farm work. Results: The survey results showed that 16.4% of the respondents experienced safety-related accidents due to farm work. The locations of the accidents were inside the cattle shed (71.4%) and facilities outside the cattle shed (19.6%). The types of accident showed collision with animals (35.7%), collision or contact with obstacles (27.1%), and musculoskeletal accidents due to heavy object handling (12.9%). The causes of the accidents were cattle (38.3%), cultivators and tractors (25.4%), facility tools in cattle sheds (9.0%), and slippery floors (6.0%). The damaged areas were hand (21.0%), spine (19.8%), lower limb (18.5%), and foot (17.3%). A self-diagnostic survey on respiratory diseases showed that 11.5% of the respondents experienced respiratory-related symptoms. The survey on safety and health during farm work showed that wearing personal protective equipment and response to emergency situations, which were needed to prevent safety-related accidents, were relatively low compared to the level of recognition of the need and awareness of safety issues. Furthermore, the field survey identified the current status of safety and health issues such as prevention management of collision accidents with cattle, how to handle heavy objects, and wearing of personal protective equipment. Conclusions: The present study identified safety-related accidents and problems in the management of safety and health among Korean native cattle farmers. In order to address the problem, it is necessary to not only provide guidelines on safety and health management which are appropriate to the characteristics of Korean native cattle farming work, but also to study the development of personal protective equipment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.97-102
• /
• 2011

This study was performed to design and develop an ergonomic equipment for strawberry sorting and packing in agricultural working environments. Potential risk of work related musculo-skeletal disorders associated with farm workers performing strawberry sorting and packing was analyzed through interviews, field surveys, work measurement, and working posture evaluation. For the evaluation of working posture, we used REBA, OWAS, and RULA assessment methods to identify multi-factorial risk factors. Based on the result of comprehensive assessment, a new concept of multi-level rotating table for strawberry sorting and packing was proposed to modify awkward working postures and improve the effectiveness of the farm work. Finally, the characteristics and effectiveness of new equipment was discussed in terms of improvements in productivity, safety, and subjective ratings of farm workers. The results of analysis showed that working conditions improved significantly.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.365-370
• /
• 1999

The revision of domestic laws is in progress according to the UN Convention on the Law of the Coastal Zone Management . Along with it, the governmental policies related to maritime environmental preservation, especially around coastal zones and public works have been promoted based on enviornment, swiftly changed from the old function-based style. Therefore, this report will point out the important aspects which should be considered whenever there is any project on the coastal zones, suggest and classify projects of reviving the nationwide coastal zones, and show how to planning , check and evaluate the necessary technologies for reviving the coastal zones. This research will track down the coastal zone management method based on the natural enviornment as one of the necessary process to check the coastal zone enviornment for effective operating of the coastal zone management equipment method, starting on August 9, 1999, and report the technologies related with it.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.569-581
• /
• 1996

A microcomputer -based data acquistion system was designed and developed at Michigan State University , USA to conduct field data studies. The system designed for the research carried out used an Apple IIe microcomputer for collecting data on-board the tractor. An AII3 Analog to Digital (A/D_ convertor was chosen to interface each analog signal to the microcomputer. A commercially available Dj TPM II was employed to display information such as an engine speed, ground speed, percent drive wheel slip , distance travelled and area covered per hour. The frequency output from the radar unit was channeled through a frequency to voltage (F/V) convertor , so that AII3 Analog to Digital (A/D) convertor could read it. The fuel consumption was measured using on EMCO pdp-1 fuel flow meter attached to the engine fuel line. The draft of the tillage and other drag equipment was determined using strain gages attached to the drawbar of the tractor. The system was developed to collect the draft and fuel requirements for various farm equipment different kind of soils.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.400-404
• /
• 2014

Purpose: Concerns over the quantity of available freshwater for agriculture have triggered the development of technologies intended to increase efficiency of water use, especially with regard to irrigation. A new technique called fertirrigation has been developed to use the same irrigation equipment for fertilization. Methods: Since the above-mentioned technique requires care during installation and use on farms, current analysis focuses on some of its characteristics. Results: High uniformity irrigation systems provide the best distribution of fertilizers, especially when used in combination with drip irrigation or micro-aspersion. The factors purity, compatibility, acidification, salinity, and solubility should be taken into account. Conclusions: Fertirrigation provides a significant increase in productivity as it allows for highly controlled nutrient application during the entire growing season. However, it may cause serious problems if misused or overused.