• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.340-346
• /
• 1998

In order to improve the prediction of dynamic behavior in structures, several lower vibration modes from FFT analysis through experiments are used to update the mechanical properties followed by the updated frequencies from numerical analysis. Performance index consists of the sum of error norms between the chosen frequencies and corresponding frequencies from numerical analysis. As an updating process of the natural frequencies, the optimization algorithm based on conjugate gradient method is adopted. The gradient of performance index is calculated using the sensitivity of selected eigenvalues with respect to each design parameter. The mechanical properties of lamina, E$\_$l/, E$\_$2/, .nu.$\_$12/ and G$\_$12/, are design parameters for the updating process. The proposed method is applied to predict the dynamic behavior of composite laminated plates of [0]$\_$8T/ and [.+-.45]$\_$2S/ separately or interchangeably. Also, the mixed case for [0]$\_$8T/ and [.+-.45]$\_$2S/ is exarm'ned to check the possibility for the improved prediction generally. The good agreement is obtained between the measured frequencies and the numerical ones. Based on the results for all the cases studied, the proposed approach has a clear potential in characterizing the mechanical properties of composite lamina.

• 한국광학회지
• /
• 제15권1호
• /
• pp.28-33
• /
• 2004

상부 도파로와 중간 결합층이 적층된 단일모드 광섬유를 기본구조로 하는 측면 연마 광섬유 결합기를 상호 광 결합이 일어나는 영역을 다층막 도파로로 등가화하여 결합 효율을 해석하였다. 다층막 구조에서 중간 결합층의 유무에 따른 반사도를 계산하여 상부 도파로의 굴절률의 함수로 도시하였고, 상부 도파로의 굴절률이 광섬유 코어의 굴절률보다 클 경우 중간 결합층의 조건에 의해서 광 결합이 증가되어짐을 보였다. 리튬나오베이트를 상부 도파로로 가지는 결합기의 실험결과를 톤해 이론적 해석의 타당함을 보였고 계산 결과와 일치함을 보였다.

• 대한전자공학회논문지SD
• /
• 제37권2호
• /
• pp.28-37
• /
• 2000

수정된 Airy 함수들과 WKB 시도해를 조합하여 언덕형 굴절율 분포를 가지는 광섬유에 대한 매우 정확한 고유방정식을 수학적으로 유도하였다. 적절한 경계조건을 적용하여 일반적인 WKB 방법이 가지는 고유한 오차 문제를 개선하도록 위상 천이 보정항 δ를 이끌어냈다. 모의 전산을 통하여, 유도된 고유방정식의 결과가 유한차분법에 의한 결과와 잘 일치함을 보였다.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.76-84
• /
• 2014

This study was performed to monitor the effects of water level change on changes of landscape, vegetation community, and species diversity of riparian forest. Hantan river dam, study area, has been constructed in the area of Chansoo-myeon, Pocheon-si and Yeoncheon-eup, Yeoncheon-gun, Gyeonggi-do, which is a dam for flood control only in flooding season. Landscape changes were notable after the construction of coffer dam, and the changes were caused by water level increase in areas of riparian forests which consisted of mainly withered willow as a dominant species in the flooding season. It changed vegetation communities of riparian forest from Phragmites japonica and Salix koreensis to Phragmites japonica. Species diversity index was lowest in 2010 when the coffer dam was constructed and showed an increasing trend later. Thus, this study is well in agreement with a previous report that plants of the genus Salix wither by muddy water during flooding and also suggests, controlling water level of river and prediction of water level change's effects should be considered when any facilities are planned.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.525-532
• /
• 2010

In this paper, wave breakers which occur in two dimensional coasts are simulated using a SPH(Smoothed Particle Hydrodynamics) method which represents the movement of fluidic physical volume with particles. As continuative fluid is approximated to the particles, the simulations are performed using fully Lagrangian method without any grid system. Two-dimensional Navier-Stokes equations and continuity equation are used for the numerical simulations. To generate incident waves, a piston type wavemaker is employed. The accuracy of the wave which is numerically generated by the wavemaker is verified by comparing with analytical results. The computations are carried out with various wave heights and slopes. The wave patterns generated through the numerical simulations are compared with several existing experimental and computational results. Agreement between the experimental data and the computation results is comparatively good. Also, the breaker depth index and the breaker height index from the present calculations are compared with the existing experimental results, and the tendency is very similar.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.43-49
• /
• 2006

The surface and pore structure of cellulose fibers have a significant impact on the properties and performance in applications. Cellulase enzymatic hydrolysis of cellulose fibers can result in changes to the surface and pore structure thus providing a useful tool for fiber modification. This research characterizes these changes using various test methods such as fiber dimension, water retention value, hard-to-remove water content, freezing and non-freezing bound water content, polymer adsorption, and crystallinity index. For a high-dosage enzyme treatment (0.10 g/g), the fiber length was significantly decreased and the fibers were 'cut' in the cross direction, not in the axial direction. The swelling capacities as measured by the WRV and HR water content increased for the high-dosage treatment. Three independent measurements (non-freezing bound water, polymer adsorption, and crystallinity index) are in good agreement with the statement that the amorphous regions of cellulose fibers are a more readily available substrate relative to crystalline regions. Based on the experimental results obtained herein, a model was proposed to explain surface and pore structure modification of cellulose fibers via enzymatic treatment.

• 천문학회보
• /
• 제43권1호
• /
• pp.56.1-56.1
• /
• 2018

Tidal disruption events (TDEs) provide evidence for quiescent supermassive black holes (SMBHs) in the centers of inactive galaxies. TDEs occur when a star on a parabolic orbit approaches close enough to a SMBH to be disrupted by the tidal force of the SMBH. The subsequent super-Eddington accretion of stellar debris falling back to the SMBH produces a characteristic flare lasting several months. The theoretically expected bolometric light curve decays with time as proportional to $t^{-5/3}$. However, the light curves observed in most of the optical-UV TDEs deviate from the $t^{-5/3}$ decay rate especially at early time, while the light curves of some soft-X-ray TDEs are overall in good agreement with the $t^{-5/3}$ law. Therefore, it is required to construct the theoretical model for explaining these light curve variations consistently. In this paper, we revisit the mass fallback rates analytically and semi-analytically by taking account of the structure of the star, which is simply modeled by the polytrope. We find the relation between a polytropic index and the power law index of the mass fallback rate. We also discuss whether and how the decay curves, which we derived, fit the observed ones.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.696-700
• /
• 1987

Guide modes in a graded index multinmode optical fiber are turned into clad modes when the optical fiber was bended into a perpendicular direction to its optical axes by microbending forces, which causes the loss of the guiding optical power. The theories reported on this microbending power loss can be applied to calculation of the transmission power loss only when the beding period equals to the mode coupling length. In this paper, we obtained the general expression of the optical power transmission loss in a graded index multimode fiber bended periodically. This can be applied to the calculation of the power loss of the periodically microbended fiber with an arbitrary bending shape and period. Also, by using the beam theory in mechanics, we could derive the expression of the displacement of the optical fiber caused by the external force which bends the fiber into a periodic trapezoidal shape. Experiments were carried out to determine the dependence of the power loss on the period of the microbending forces. Experimnetal results were in good agreement (in the same order of the magnitude) with theoritical values derived in our work within the bending period region of 2mm-10mm.

• 한국광학회지
• /
• 제4권3호
• /
• pp.323-329
• /
• 1993

본 논문에서는 광굴절 특성을 나타내는 파라메타중 회절효율의 전도도비(${\sigma}_d$/{\sigma}_p$) 의존성에 관해 연구 하였다. 전도도비는 입사빔의 세기에 의존하며, 암전도도 ${\sigma}_d$가 광전도도 ${\sigma}_p$ 에 비해 무시할 수 없을 때 입사빔의 세기에 따라 전도도비가 변화되고, 전도도비의 변화는 결정 내의 정전기장에 영향을 주게 된다. 정전기장의 변화는 전기광학효과에 의해 굴절율을 변화시키고, 굴절율의 변화는 회절효율과 관계한다. 개방회로 상태에서 0.1%/mole $Fe:LiNbO_3$ 결정과 $LiNbO_3$ 웨이퍼에 Fe를 증착시킨 LiNb$O_3$에서 두 입사빔의 세기비와 입사빔세기의 합을 다르게 할 때 회절효율을 측정하고 이론값과 비교하였다.

• 한국도로학회논문집
• /
• 제12권2호
• /
• pp.123-127
• /
• 2010

본 논문에서는 최소단면 보수가 완료된 아스팔트 콘크리트 포장의 평탄성 평가를 위하여 경량 프로파일러를 이용하여 측정하였으며 평탄성 분석을 실시하였다. 측정 프로파일러의 정확도를 검토하기 위하여 2회 측정한 프로파일을 이용하여 반복성(repeatability) 검증을 수행하였다. Cross-Corelation 함수를 이용하여 측정치간의 일치를 검증하였다. 최소단면 보수가 이루어진 아스팔트 콘크리트 포장 부분과 기존 포장의 평탄성을 국제평탄성지수와 PrI 지수를 비교 분석하였으며, 최소단면 보수가 이루어진 차선의 평탄성이 대체적으로 좋지 않았다. 향후 최소단면 보수 지역의 평탄성 평가에 대한 기초자료로 사용할 수 있다고 판단된다.