• 한국항해항만학회지
• /
• 제28권5호
• /
• pp.463-468
• /
• 2004

수리조선소에서 발생하는 TBT 함유 선박세척폐수의 용매추출 처리기술을 개발하기 위한 기초연구로서 인공 선박세척폐수를 이용하여 선박용 및 자동차용 디젤, 벙커 B유, 신너, 톨루엔, 에테르 등의 여러 가지 용매들의 TBT 추출효율을 비교하였으며, 추출효율에 대한 추출용매의 양 및 교반시간, 강도, pH 등의 추출조건의 영향을 평가하였다. 선박용 경유는 신나, 병커B 등에 비해 상대적으로 우수한 TBT 추출효율을 보였으며, 적정 추출용매 주입량은 폐수 IL 당 용매 10mL로 평가되었다 TBT 추출을 위한 교반강도가 50rpm에서 250rpm으로 증가함에 따라 잔류 TBT 농도는 약 120ppb에서 2.8ppb로 크게 감소하였다 잔류 TBT는 추출 1시간이후 크게 감소하였으며, 5시간 이후부터는 다시 증가하였다. 추출효율에 대한 Ph의 영향은 크지 않았으나, pH 6∼7의 약산성영역에서 양호한 추출효율을 보였다.

• 유기물자원화
• /
• 제25권4호
• /
• pp.41-50
• /
• 2017

점도, 임펠러 종류, 소비전력 등에 의해 영향을 받는 생물학적 폐기물 처리시설 및 에너지 생산 플랜트에서 적절한 교반 시스템의 설계는 필수적이다. 본 연구에서는 적절한 교반 시스템의 설계를 위해 음식물류폐기물을 이용하여 다양한 조건(운전 pH 및 농도)에서의 수소발효 시 유변학적 특성의 변화를 조사한 후, 이를 기반으로 교반강도를 설계하였다. 운전 pH에 따른 수소발효 실험에서 수소전환율은 $0.51{\sim}1.77mol\;H_2/mol\;hexose_{added}$였고, 가장 높은 수소전환율은 운전 pH 5.5에서 나타났다. 발효액은 전단속도가 증가함에 따라 점도가 감소하는 Shear thinning 거동을 보였다. 탄수화물이 분해되면서 발효 이후 점도는 초기 점도보다 감소하는 경향을 보였으나, 운전 pH의 변화에 따른 발효액의 점도 변화는 크지 않았다. 탄수화물 농도 10~50 g Carbo. COD/L에서 수소전환율은 $1.40{\sim}1.86mol\;H_2/mol\;hexose_{added}$로 운전 pH 조건이 수소전환율에 미친 영향과 비교했을 때 큰 차이는 없었다. 발효액의 Zero viscosity와 Infinite viscosity는 탄수화물 농도에 따라 각각 $10.4{\sim}346.2mPa{\cdot}s$와 $1.7{\sim}5.3mPa{\cdot}s$로 나타났는데, 10 g Carbo. COD/L와 20 g Carbo. COD/L에서 발효액의 점도 값은 거의 차이가 없었다. 실험 결과에 기초하여 교반강도를 설계한 결과, 기질농도 30 g Carbo. COD/L의 수소발효 초기 및 발효 후 교반강도는 각각 26.0, 10.0 rpm으로 약 2.5배 정도의 교반강도를 줄임으로써 에너지를 절약할 수 있을 것으로 사료된다.

• Journal of Microbiology and Biotechnology
• /
• 제16권8호
• /
• pp.1240-1247
• /
• 2006

The present study investigated the influence of the aeration rate and agitation intensity on the production of the mycelial biomass and antioxidative exopolysaccharide (EPS) in Ganoderma resinaceum. In submerged cultures with varying agitation speeds and aeration rates in a stirred-tank reactor, the maximum mycelial biomass and maximum EPS concentration were achieved at 50 rpm and 300 rpm, respectively. Under varying aeration rates, the highest amount of mycelial biomass (18.1 g/l) was accumulated at the lowest aeration rate (0.5 vvm) and the maximum EPS production (3.0 g/l) obtained at 1.0 vvm. A compositional analysis revealed that the five different EPSs were protein-bound heteropolysaccharides, consisting of 87.17-89.22% carbohydrates and 10.78-12.83% proteins. The culture conditions had a striking affect on the carbohydrate composition of the EPS, resulting in different antioxidative activities. All the EPSs showed strong scavenging activities against superoxide and 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radicals, whereas no clear trend in antioxidative activity was observed against hydroxyl radicals and lipid peroxides. Although the precise reason for this difference is still unclear, the high glucose moiety of EPS is probably linked to its broad spectrum of antioxidative activity.

• 한국지반환경공학회 논문집
• /
• 제15권8호
• /
• pp.45-50
• /
• 2014

하수관 내에서의 하수와 미생물의 반응에 대한 실험은 이미 매설된 하수관에 적용할 경우 실험조건의 변화가 제한적이며 실험시간에도 한계가 있다. 본 연구에서는 이러한 하수관 내에서의 하수와 미생물의 반응에 대하여 DO를 제한 조건으로 설정하였을 경우, 실험실 내에서 실험반응조를 통해 재현하는 방법에 대하여 연구하였다. 하수관 내에서의 DO 농도는 기상 중의 산소가 하수 내로 이동하는 재포기현상에 의해 조절된다. 이러한 현상을 이용하여 임의로 실험반응조에서 하수관 내의 유하조건을 조절하고 재포기현상을 재현하여 유하조건과 재포기계수와의 상관관계를 얻을 수 있으며, 교반강도(속도경사)에 따른 재포기계수와 하수관거에서의 유하조건에 따른 재포기계수의 상관관계를 통해 동일한 재포기계수 값을 갖는 교반강도와 유하조건을 설정할 수 있다. 이러한 결과를 통해 재포기계수를 제한인자로 설정하여 실험을 실시할 경우 하수관거에서의 상황을 실험반응조를 통해 재현할 수가 있었다.

• 환경위생공학
• /
• 제17권3호
• /
• pp.21-30
• /
• 2002

This study was Performed to evaluate the effective solidification of Cd sludge using cement and power plant fly ash as cement admixture, to identify the leaching characteristics of the heavy metal Cd sludge solidified, and to develope proper KLT(Korean Leaching Test) of hazardous waste. KLT was compared with EPT(Extraction Procedure Toxicity) and TCLP(Toxicity Characteristics Leaching Procedure). Fly ash contents ranged from 0% to 30% of cement weight. The experimental results showed that the optimum amount of fly ash replaced was 10% to 15% and KLT was less appropriate than EPA and TCLP. Also the purpose of the study was to suggest the modification factors on the leaching test currently used, based on the above mentioned aspects. The effects of pH, leaching time, leaching for agitating intensity, and leaching solvent were investigated. As the result of test, the leaching potential was relatively high when the pH and agitation intensity of leaching solution were 5 and 150rpm, respectively. Leaching time of six hours was found to be sufficient and the use of acetic acid as a leaching solvent is more useful in landfill site particularly.

• 환경위생공학
• /
• 제14권2호
• /
• pp.40-45
• /
• 1999

This study deals with an investigation on low cost adsorbents locally available n dyeing wastewater treatment of color removal. Peat, bentonite, slag and fly ash were utilized for this study. Considering that low cost adsorbents contained in $SiO_2$, $Fe_2O_3$ and $Al_2O_3$ compositions, and coagulants were mainly used aluminate and ferrate in color removal. Color of dyeing wastewater was high removed in peat, berntonite and slag except for fly ash with passed time. It could be known that color removal of peat and slag were increased to pH 4, but was hardly changed with advancing to alkaline. Color intended to be high removed with increasing of agitation speed but to be almost slow after 150rpm. As a result on the experiment of Freundlich adsorption isotherms, adsorption intensity(l/n) appeared to be peat>fly ash>slag>bentonite and adsorption capacity(k) came out peat>bentonite>slag>fly ash. Therefore, if low cost adsorbents substituted for existing adsorbents, peat, bentonite and slag could look forward to an expected economical effect.

• 환경위생공학
• /
• 제13권2호
• /
• pp.76-81
• /
• 1998

The technology of removing phosphorous, considered as one of the most important control nutrients causing eutrophication in various water bodies, have been investigated by many researchers. In this study, casts which can be obtained from the vermicomposting of mixing sewage sludge and cow manure, were used as an adsorbent, and their effects of several physical/chemical factors on the efficiencies of phosphorous adsorption were examined by batch tests. Generally, it could be showed that the efficiencies of phosphorous adsorption were very influenced by cast dosage, temperature and agitation speed. If we reflected the adsorption capacity(k) and adsorption intensity(1/n) of Freundlich isotherm, we couldn't consider casts as a good adsorbent for removing phosphorous. But, because casts were relatively excellent in cation exchange, in point of waste recycling, we could know that they were capable of removing phosphorous. The SEM observation revealed that the evident variations were hardly seen, but particle sizes of cast were relatively bigger and showed forms of smaller plate than before.

• Nuclear Engineering and Technology
• /
• 제35권3호
• /
• pp.191-205
• /
• 2003

Effects of the width and location of a flow disturbing circular plate, installed at a vertical tube surface, on nucleate pool boiling heat transfer of water at atmospheric pressure have been investigated experimentally. Through the tests, changes in the degree of intensity of liquid agitation have been analyzed. The plate changes the fluid flow around the tube as well as heat transfer coefficients on the tube surface. It is identified that the plate width changes the rate of the circulating flow whereas its location changes the growth of the active agitating flow. Moreover, the flow chugging was observed at the downside of the plate.

• KSBB Journal
• /
• 제4권3호
• /
• pp.221-228
• /
• 1989

각종 섬유질 효소당화반응조내의 현탁액 혼합교반 양상이 효소당화에 미치는 영향을 검토하기 위하여 3종의 대표적인 bioreactor;vertical impeller type bioreactor-(VITB), horizonatl paddle type bioreactor(TDTB)를 제작하여 그 효용성을 비교 검토하였다. 최적 교반강도는 impel-ler나 paddle로 현탁핵을 교반하는 VITB와 HPTB가 각각 100rpm, 그리고 통자체를 회전시켜 교반하는 TDTB가 200rpm이었으며 TDTB에 부착된 baffle의 형태 및 크기는 큰 영향을 주지 않았다. 또한 VITB나 TDTB의 경우 과다한 교반은 효소의 실활을 유발시켜 오히려 섬유소당화를 저해하였다. 3종의 bioreactor의 최적 교반조건에서의 당화효율을 비교한 결과 VITB가 가장 높았으며 특히 고농도 섬유소 당화시 가장 높은 당화효율을 보여, 가장 효율적인 교반양상을 나타내는 것으로 보인다. 이로 미루어 impeller나 paddle의 물리적 충격에 의한 현탁액의 cellulose network를 파괴시키는 효소반응기가 단순히 교반혼합하는 반응기에 비하여 우수한 결과를 줌을 알 수 있었다. 반면 주어진 양의 당을 생산하는데 소요되는 동력소모를 검토한 결과 TDTB가 VITB에 비하여 다소 낮았으나 고농도의 경우는 급속히 증가되었다. 적절한 bioreactor의 선정에는 기질의 가격, 당화수율, 고농도 당화, 그리고 반응기의 scale-up의 용이성등이 종합적으로 검토되어져야 할 것이다.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.94-102
• /
• 2015

Electro-coagulation experiments were conducted with aluminum (Al) or iron (Fe) electrode in order to determine the optimal electrode material and operation conditions for algae removal. Al electrode showed higher removal rate of algae than Fe electrode because Al flocs have positive surface charges which electrostatically attract algae species having negative surface charges. Removal rate of algae and total phosphorous (T-P) was increased as current density and electrode area increases. It was also found that initial pH with neutral range was optimum for T-P removal by electro-coagulation. Bench-scale continuous flow experiments consisted of electro-coagulation reactor, agitation tank and settling tank were conducted. In electro-coagulation reactor, a large fraction of Al flocs were distributed to scum layer, due to the gas bubbles generated by electrolysis reaction. In agitation tank, most of Al flocs were settled and the optimal mixing intensity was found to be 50 rpm to achieve good settleability. The removal rate of algae was about 90-95%. Additionally, the removal rate of the T-P and COD was observed to be $73.8{\pm}8.0%$ and $75.0{\pm}3.8%$, respectively. Meanwhile, the removal rate of total nitrogen (T-N) was relatively low at only 24%.