• Journal of Korean Medical classics
• /
• v.34 no.1
• /
• pp.47-65
• /
• 2021

Objectives : An accurate judgment of prognosis when treating diseases is crucial. While the 『Shanghanlun(傷寒論)』 deals with the prognosis of the Three Yin Diseases with great importance, full-scale studies have been lacking. This paper aims to study the Three Yin Diseases with a focus on prognosis analysis. Methods : Among the Three Yin Disease verses, those that could provide clues to prognosis were selected and analysed. Conclusions & Results : When Yang pulse patterns such as long(長脈)·floating(浮脈)·rapid(數脈) pulses and Yang symptoms such as fever, vexing heat, mild perspiration, thirst, warmth in hands and feet are present in Yin disease, it could be taken as signs of Yang Qi restoration. In these situations, Yin Cold pattern such as diarrhea and reversal cold disappear and the prognosis is positive. However, despite Yang pulse patterns and symptoms, there are cases where diarrhea happens as a result of cold dampness being eliminated due to Yang Qi restoration. Also, when Yang Qi starts communicating smoothly after its restoration in the Three Yin Diseases, perspiration can happen. When diarrhea and reversal cold, which are patterns of Yin Cold get worse, with pulse patterns such as unfelt(脈不至)·replete(實脈)·fulminating(脈暴出) pulses, false heat symptoms such as fever and hot flashes happen, accompanied with Yang Qi depleted symptoms such as inability to lie down due to agitation, continuous perspiration, sore throat, dyspnea, and exaggerated breathing happen. When fast pulse, fever, and perspiration are present due to depression and stagnation of ministerial fire, symptoms such as bloody stool with pus, purulent abscess, sore throat, and inability to lie down due to agitation show, which signal negative prognosis. In bad cases of Reverting Yin Disease, there is continuous diarrhea and bloody stool with pus, which can be due to either Kidney Yang deficiency or depression and stagnation of ministerial fire. It could also be caused by excessive heat.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.61-71
• /
• 2022

Pool boiling heat transfer is widely applied in nuclear engineering fields. The influence of heating surface orientation on the pool boiling heat transfer has received extensive attention. In this study, the heating surface with different roughness was adopted to conduct pool boiling experiments at different inclination angles. Based on the boiling curves and bubble images, the effects of inclination angle on the pool boiling heat transfer and critical heat flux were analyzed. When the inclination angle was bigger than 90°, the bubble size increased with the increase of inclination angle. Both the bubble departure frequency and critical heat flux decreased as the inclination angle increased. The existing theoretical models about pool boiling heat transfer and critical heat flux were compared. From the perspective of bubble agitation model and Hot/Dry spot model, the experimental phenomena could be explained reasonably. The enlargement of bubble not only could enhance the agitation of nearby liquid but also would cause the bubble to stay longer on the heating surface. Consequently, the effect of inclination angle on the pool boiling heat transfer was not conspicuous. With the increase of inclination angle, the rewetting of heating surface became much more difficult. It has negative effect on the critical heat flux. This work provides experimental data basis for heat transfer and CHF performance of pool boiling.

• Journal of Veterinary Science
• /
• v.21 no.1
• /
• pp.8.1-8.11
• /
• 2020

This study reports the clinical use of two sevoflurane-based anesthetic techniques in dogs undergoing craniectomy. Twenty-one animals undergoing elective rostrotentorial or transfrontal craniectomy for brain tumor excision, anesthetized with sevoflurane, were enrolled in this retrospective, observational study. Anesthetic records were allocated to two groups: Sevo-Op (sevoflurane and short acting opioid infusion): 8 dogs and Sevo-Dex (sevoflurane and dexmedetomidine infusion): 13 dogs. Average mean arterial pressure (MAP), heart rate, end-tidal carbon dioxide, end-tidal sevoflurane and intraoperative infusion rates during surgery were calculated. Presence of intra-operative and post-operative bradycardia, tachycardia, hypotension, hypertension, hypothermia, hyperthermia was recorded. Time to endotracheal extubation, intraoperative occurrence of atrioventricular block, postoperative presence of agitation, seizures, use of labetalol and dexmedetomidine infusion were also recorded. Data from the two groups were compared with Fisher's exact test and unpaired t tests with Welch's correction. Odds ratio (OR) and 95% confidence interval (CI) were calculated for categorical variables. Intra-operatively, MAP was lower in Sevo-Op [85 (± 6.54) vs. 97.69 (± 7.8) mmHg, p = 0.0009]. Time to extubation was longer in Sevo-Dex [37.69 (10-70) vs. 19.63 (10-25), p = 0.0033]. No differences were found for the other intra-operative and post-operative variables investigated. Post-operative hypertension and agitation were the most common complications (11 and 12 out of 21 animals, respectively). These results suggest that the infusion of dexmedetomidine provides similar intra-operative conditions and post-operative course to a short acting opioid infusion during sevoflurane anesthesia in dogs undergoing elective rostrotentorial or transfrontal intracranial surgery.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.59-66
• /
• 2022

To investigate the rate-determining step of nickel, cobalt and copper electrowinning, experiments were conducted by varying the electrolyte temperature and agitation speed using a rotating disc electrode. Analyzing the rate-determining step by calculating the activation energy in the electrowinning process, it was found that nickel electrowinning is controlled by a mixed mechanism (partly by chemical reaction and partly by mass transport), cobalt is controlled by chemical reaction, and copper is controlled by mass transfer. Electrowinning of nickel, cobalt and copper was performed by varying the electrolyte temperature and agitation speed, and the comparison of the current efficiencies was used the determine the rate-determining step.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.843-859
• /
• 2017

The JK-1 isolate which was the best producer of indole-3-acetic acid and carotenoid among the 388 strains isolated from 28 wetlands in Jeju, was identified to be Rhodopseudomonas palustirs belongs to a typical group of non sulfur purple bacteria based on 16S sRNA sequencing. This study investigated the effect of different cultural conditions of pH, temperature, agitation, light and aeration on growth, IAA and carotenoid production of photosynthetic bacterium JK-1 for optimization of IAA and carotenoid production. It was found that growth, IAA, carotenoid, and bacteriochlorophyll production with light (3,000~3,500 Lux) and agitation (100 rpm) showed better results than those with dark/static or dark/agitation (100 rpm) in anaerobic conditions. The optimal pH, temperature and agitation speed for cell growth were 7, $30^{\circ}C$, 150 rpm, for IAA production were 9, $30^{\circ}C$, 150rpm and for carotenoid production were 6, $25^{\circ}C$, 50 rpm, cultured for 72 h under anaerobic light, respectively. The growth and IAA production were high in aerobic culture compared with anaerocic culture, whereas carotenoid and bacteriochlorophyll content were decreased extremely in aerobic condition (0.5~1 vvm). Subsequently, the optimal culture conditions for JK-1 were selected with pH 7, $30^{\circ}C$ and 100 rpm under anaerobic light and the effect on plant growth was tested by pot assay. Inoculation of JK-1 with 3% (v/v) level caused increase in shoot and root dry weigh that varied from 20%~58% to 40%~28% in young radish in camparison to uninoculated treatment at 50 days of growth. The study suggests that the JK-1 isolate may serve as efficient biofertilizer inoculants to promote plant growth.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.569-571
• /
• 2000

A fiber optic oxygen sensor has been employed to monitor the concentrations of dissolved oxygen in a bioreactor. The characteristics of fiber optic oxygen sensor was investigated, e.g. the dependency of agitation rate on the oxygen measurement and also the dependence of temperature on the performance of fiber optic oxygen sensor etc. We have also applied to monitor the concentrations of dissoved oxygen in real cultivation processes by using the fiber optic oxygens sensor. The fiber optic oxygen sensor can be applied to measure the concentration of metabolites by immobilizing some enzymes, e.g. glucose oxidase and also employed for the environmental technology.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.394-397
• /
• 2001

In order to maximize the cell growth and the biosurfactant production by the Pseudomonas aeruginosa BYK-2(KCTC 18012P), in the fed-batch fermentation processes were performed varying the feeding medium concentrations and the feeding rate. Feel-batch culture was performed with the optimal agitation speed of 200rpm and the aeration rate of 0.67vvm in a 7L Jar fermentor containing 3L of modified medium and 2.0-2.5%(v/v) fish oil as a carbon source. Addition of fish oil(2.5mL/l00mL modified medium), when fish oil was depleted, the cell and biosurfactant concentration were 6.1g/L and 22.7g/L, respectively.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.303-307
• /
• 1998

The fermentation conditions for the maximal production of the useful polysaccharides(water soluble polysaccharide and cell bound polysaccharide) from marine bacterium Zoogloea sp.(KCCM 10036) were investigated with a 5 L jar fermentor. The maximal production of these polysaccharides was obtained under the conditions of initial pH 7.8, 30$^{\circ}C$, 400 rpm of agitation speed, 2 Wm of aeration rate, 10%(w/v) of inoculum size and 2.5%(w/v) of glucose substrate and 10.38 g/L of total polysaccharide was produced. Apparent viscosity of the culture broth was increased with the production of these polysaccharides and the maximum value was reached to 22,500 cp.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.124-128
• /
• 2005

This studies were carried out to investigate optimal conditions for Lactic acid bacteria growth, which was grown in a batch fermenter. The optimal temperature was $30^{\circ}C$, optimal pH was 6.5 and agitation speed was 100rpm and didn't supply the air. Used media compositions were yeast extract 5g/L, peptone 10g/L, sugar 20g/L, beef extract 10g/L, tween 80 1ml/L, ammonium citrate 2g/L, sodium acetate 5g/L, magnesium sulfate 0.1g/L, manganese sulfate 0.05g/L, dipotassium phosphate 2g/L. These results would be useful for enhancing lactic acid bacteria concentration.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.277-282
• /
• 1989

Xanthan gum is a biopolymer produced by Xanthomonas campestris. In xanthan gum fermentation, the fermentation broth changes to highly viscous non-Newtonian fluid as xanthan gum concentration increases. Maximum xanthan gum concentration is limited by high viscosity of the broth since mass transfers of nutrient and oxygen are inhibited. Int this study the mass transfer effects were investigated in batch and fed-batch fermentations at various agitation speeds and by separate oxygen transfer experiments. Xanthan gum production rate was observed to be largely dependent on oxygen transfer coefficient; while cell growth rate was not affected highly by this factor.