• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.329-340
• /
• 2006

Statement of problem: Damping of the peak force transmitted to implants has been reported by in vitro studies using impact forces on resin-veneered superstructures. Theoretical assumptions suggest that use of acrylic resin for the occlusal surfaces of a prosthesis would protect the connection between implant and bone. Therefore, the relationship between prosthesis materials and the force transmitted through the implant system also needs to be investigated under conditions that resemble the intraoral mechanical environment. Purpose: The purpose of this study was to analyze the fracture strength and modes of temporary prosthesis when a flange or occlusally extended structure were connected on the top of the abutment. Material and method: Modified abutments of winged and bulk design were made by casting the desired wax pattern which is made on the UCLA type plastic cylinder. Temporary crowns were made using templates on the modified abutments, and its fracture toughness and strain were compared to the traditional temporary prosthesis. To evaluate the effect of aging, 5.000 times of thermocycling were performed, and their result was compared to the 24hours specimen result. Results: The following conclusions were drawn from this study: 1. In the fracture toughness test, temporary crown's fracture line located next to the screw hole while modified designs with metal support showed fracture line on the metal and its propagation along the metal-resin interface. 2. Wing and bulk structure didn't show significant difference in the fracture toughness (p>0.05), but wing structure showed stress concentration on the screw hole area compared to bulk structure which showed even stress distribution. 3. In the fracture toughness test after thermocycling, wing and bulk structure showed increased or similar results in metal supported area while off-metal area and temporary crown showed decreased results. 4. In the strain measurement after thermocycling, its value increased in the temporary and bulk structure. However, wing structure showed decreased value in the loading point while increased value in the screw hole area. Conclusion: Wing type design showed compatible result to the bulk type that its application with composite resin prosthesis to the implant dentistry is considered promising.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.6 no.4
• /
• pp.153-171
• /
• 2011

The welfare system and the direction of the welfare policy have been unable to escape greatly from the frame of the past against the facts that the external environments of the national economy of the world including Korea have been changing in quick and rapid speed. Such results have caused the issues related with the welfare, economy and society ended in the ideological collision in connection with the goals of the policy, the right agreement between the policies lacked, and the intervention and conflict between the interest group concerning the policy continued. Social policy of Korea in the past had the level of complementing the parts which could not be solved through the growth. Employment creation had been achieved continuously backed up by the high rate of growth. And the low aging level, the young population structure, and the high rate of childbirth had been the structures that made such achievement possible. New economic, social and welfare environment at home and abroad has been requesting new change in welfare policy. Goal of the economic and social policy is to construct the safe economic and social system. And what has been requested has been the formation of the economic and social policy orienting the welfare nation in form of social investment and welfare expansion. Also the direction in strengthening the welfare system of Korea shall have the balance between the protection and activation strength with the necessity of converting to the prevention welfare from the post welfare. Also the public part, market, the 3rd sector and the share of the role of an individual shall be achieved. And what is needed is the achievement of the transfer from the paradigm of residual welfare to the universal welfare. And such improvements of the welfare system will be able to elevate the possible continuity of the system in long term basis through the improvement of the welfare system.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.4
• /
• pp.788-800
• /
• 2002

Aging is characterized by an age-dependent reduction in bone density. Pronounced bone loss by postmenopausal estrogen deficiency induces a bad effect on dynamic balance of bone metabolism. When the bone density is reduced to the level below the fracture threshold, the risk for fracture is greatly increased. The purpose of this study is to examine what are the effects of the Yuklinzu(YLZ: 毓麟珠) on the ovariectomized rat model of postmenopausal osteoporosis. The results of the experiment are as follows: Body weight in control group showed significant increase in comparison with sham, but that in YLZ-treated showed no change in comparison with control. The level of serum albumin in control group showed significant decrease in comparison with sham. That in YLZ-treated was slightly decreased in comparison with control. The level of serum ALP activity in control group showed significant increase in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. The level of serum phosphorous in control group showed significant increase in comparison with sham, but that in YLZ-treated showed no change in comparison with control. The level of serum calcium in control group showed no change in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. The level of serum GOT in control group showed no change in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. The level of serum GPT did not significant change among the three groups. The level of serum estrogen in control group showed slightly increased in comparison with sham, but that in YLZ-treated showed no change in comparison with control. The level of serum T3 in control group showed no change in comparison with sham, and that in YLZ-treated showed no change in comparison with control. The level of serum T4 in control group showed significant increase in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. Mechanical strength of the femur neck in control group showed significant decrease in comparison with sham. That in YLZ-treated showed slightly increased in comparison with control. Trabecular bone area as well as trabecular thickness in control group showed significant decrease in comparison with sham. Those in YLZ-treated showed significant increase in comparison with control. Trabecular number and did not significant change among the three groups. Trabecular separation only in YLZ-treated showed significant decrease in comparison with control. Osteoclast number and oseoblast surface in control group showed significant increase in comparison with sham. Those in YLZ-treated showed slightly decreased in comparison with control. According to the above these results, YLZ has shown to be capable of preventing and curing osteoporosis caused by old-aged and postmenopause.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.17-25
• /
• 2011

This paper aims to find the optimal control gain for enhancing the convenience of electric walking frames and design a control algorithm. With the recent advances in medical technology, there has been a rapid increase in the aging population and a variety of mobile walking frames have been developed for improvement of the quality of life. However, the manual walking frames of such mobile aids don't have any electric motor which helps facilitate elderly users' walking and thus are not efficient enough for the old people of weak strength to use especially when moving on uneven surfaces such as slopes or thresholds. The types of electric walking frames have been developed to overcome such inefficiency. Electric walking frames require users' control operations for motor driving unlike manual frames. Therefore, when they are not properly handled, it causes considerable inconvenience to their users. The present study compared the electric walking frames with manual ones in terms of operational convenience and attempted to improve the user convenience of walking frames varying the control value for user convenience based on certain standards. This paper presented a haptic sensor designed to recognize the will to walk and measure the degree of convenience and proposed a control algorithm for improvement of convenience. For user convenience, this paper evaluated the relative convenience of walking frames in view of changing differences between the center of vehicle (COV) and the center of position (COP). With the employment of an electric walking frame and a new measuring method, all the processes were experimentally tested and validated.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.749-754
• /
• 2010

In this study, rubber vulcanization property, change in physical property, morphology and chemical characteristics of blended rubber depending on various IR/CR ratio were investigated for the purpose of the improvement of material property and durability. The effect of surface treatment by chlorine on the friction coefficient was also studied with various conditions of surface treatment. In terms of vulcanization property, as the amount of CR content increased, the speed of cure was decreased, while the density of crosslinking stayed constant. It means hardness and modulus were increased as the CR content increased. It is related to change in cure property and mechanical strength was improved by the effect of crystallization reaction. In the aging property, as the CR content increases, the changed amount of basic properties were decreased, which acts as a reducing factor in change of aged property by complementing weak point in mechanical property. It was found that the degree of property change for surface treated samples were reduced. According to the microscopic result, the degree of surface dispersion on rubber blends was increased by increasing CR content. Rubber surface showed uniform direction in pattern with increased smoothness and luster by treatment with chlorine. The degree of rubber reforming was measured by the remaining amount of chlorine and the friction coefficient was dependent on the amount of chlorine combined with rubber. In the initial stage of surface treatment, from 10 to 40 phr, the friction coefficient of specimen was rapidly reduced. However, as the concentration of chlorine solution increased, the change in friction coefficient was decreased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.617-624
• /
• 2015

This paper describes the development of a wearable robot to assist the elbow muscle for use by elderly workers in aging societies. Various previously developed wearable robots have drawbacks in terms of their price, portability, and slow recognition of the wearer's intention. In this paper, emphasis is placed on the following features to minimize these drawbacks. The first feature is that an actuator is attached only at the elbow joint that withstands the highest moment during arm motion to reduce the weight, volume, and price of the robot and increase its practicality. The second is that operation of the wearable robot is divided into two modes, a tracking mode and a muscle strengthening mode, and the robot can automatically switch between these modes by analyzing the wearer's intention through the brachial muscle strength measuring device developed in this study. The assistive performance of the developed wearable robot is experimentally verified by motion tracking experiments without an external load and muscle strengthening experiments with an external load. During the muscle strengthening experiments, the power of the muscle of the upper arm is measured by a commercial electromyography (EMG) sensor. Motion tracking performance at a speed of $120^{\circ}/s$ and muscle assistance of over 60 % were obtained using our robot.

• Journal of Korean Society of Forest Science
• /
• v.63 no.1
• /
• pp.12-20
• /
• 1984

This research was performed to estimate the properties of particleboard based on the press time and temperature which was made of chip of larch that grows in Korea. The results in this study were as follows: 1) Even though the chips, 1:1-35 ratio between length and thickness, are relatively bad condition, the surface smoothness that can easily spread the adhesive evenly and thoroughly and bonding ability of chips can give proper physical properties. 2) It shows more mechanical properties at the press time of 10 min. in MOR (Modulus of Rupture), MOE (Modulus of Elasticity) and SHA (Screw Holding Ability). 3) It is not significant according to the press time 20 min. in MOR, IBS (Internal Bonding Strength) and SHA, for the reciprocal actions between the accelerating aging effect of chip and the softening effect of adhesion are occured. 4) IBS is rising according to the increasing temp at the press time of 10 min. Because it needs to transfer the plate heat to make the proper hardening temp. In the layer. 5) The heat treatment effects have greatly influenced the stahility of dimension by falling the absorption, anisotropy and inhomegenity. As a result of these the values of thickness and linear expansion ratio were respectively dropped by the increase of press temp and the time and so did absorption.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.1-12
• /
• 2006

An existing Steel pipe, Cast iron pipe and Concrete pipe is can not escaped from aging, specially Metal tube is causing many problems that the quality of water worse is concerned about many rust and mike efficient use of preservation of water. The use of Glassfiber Reinforced Plastic Pipe(GRP PIPE) should be one of the possible scheme to get over these problems. The GRP PIPE has an excellent resistance power and the life is lasting from 50 to 100 years roughly. It's to be useful as a result of high durability and a good construction work also it is a light weight therefore can be expected to short the time of construction and man power. In this research, to executed the small-scaled model test, in-situ model test using CLSM of in-situ soil and to evaluated the stress - strain of the pipe also try to estimated how useful is. From the model test in laboratory, the vertical and horizontal deformation of the GRP PIPE measured in six instance using 200mm and 300mm in diameters. The value of experimentation, theory, analysis got the same results of the test, but the vertical and horizontal deformation gauged in small and the earth pressure was almost zero using CLSM of in-situ soil..

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.181-192
• /
• 2013

Given both structural safety and economic benefits of aging facilities, remodelling of the existing facilities is preferable to reconstruction. This recognition provides an opportunity to reduce the commitment of resources and national budget. However, when a subordinate troop asks for remodeling or reconstruction of a deteriorated facility, it is difficult to ensure the consistency and objectivity in the process of decision making for the alternatives due to the absence of systematic and quantitative rating methodology. Their economic evaluation methodology only exists in a manual format. Thus, further research is required for converting the methodology into an automated system in view of practicality such as rapid and accurate data processing. The contributions of this study are as follows: 1) Literature review found out a representative economic evaluation model focused on military facilities, and comparative analysis with a similar study identified the strength and weakness. 2) this study presented how to convert the theoretical framework which enables to solve a specific subject matter into an automated system. 3) it developed a user friendly interfaces which consist of four functional modules by considering the usability and accessibility of the system user. 4) the developed system was verified by a case study in terms of four kinds of performance indicators.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.4
• /
• pp.415-430
• /
• 2015

Since the late 1990s Vinacafe has gone through strategic changes in corporate governance and managements due to an increase in the introduction of coffee MNCs, a growth of global demands in sustainable coffee, aging coffee tree, and the deterioration of coffee production with climate changes in Vietnam. Vinacafe has attempted to cope with these kinds of changes through strategies for equitization. Therefore, the main aim of this paper is to identify strategies for enhancing the competitiveness of the Vietnamese coffee industry by investigating changes in corporate governance and processes of coffee production and distribution. The equitization of Vinacafe has led to the enhancement of coffee competitiveness in two perspectives. Firstly, as it has decentralized decision-making from headquarter, subsidiaries have become able to strength their competitiveness themselves by introducing new technologies, improving coffee quality, and encouraging the introduction of eco-friendly production methods through cooperative relationships with stakeholders involved in coffee production and distributions in Vietnam. Secondly, it has also enhanced competitiveness through the diversification and effectiveness of coffee managements by intensifying the flexibility of contract with coffee farmers and diversifying coffee sales and supply chains in Vietnam.