• 제목/요약/키워드: Aging heat treatment

검색결과 313건 처리시간 0.023초

온도 및 숙성기간이 마늘의 화학적 성분변화에 미치는 영향 (Effects of Aging Temperature and Time on the Conversion of Garlic (Allium sativum L.) Components)

  • 조강진;차지영;임주혁;김재현
    • 한국식품영양과학회지
    • /
    • 제40권1호
    • /
    • pp.84-88
    • /
    • 2011
  • 생마늘을 온도별로 숙성시켰을 때 일어나는 물질의 생성과 변화에 대하여 조사한 결과, 고온숙성 마늘(흑마늘)의 열수 추출물에서 5-hydroxymethyl-2-furaldehyde(HMF)가 생성됨을 확인하였으며, HMF의 생성은 $75^{\circ}C$에서는 7일 이후부터 급격히 증가하기 시작하였으며 35일차에는 13.09 mg/g dry weight까지 계속 증가하는 경향이었다. 그러나 $60^{\circ}C$에서는 HMF의 생성은 거의 억제되었으며, 28일차부터 생성되긴 하였으나 35일차에도 0.35 mg/g dry weight로 그 양은 $75^{\circ}C$ 조건에 비하여 매우 적었다. HMF의 생성은 당 화합물 중 과당(fructose)이 탈수되어 생성된다. 마늘 중 유리당의 생성량을 조사해 본 결과 $75^{\circ}C$에서 숙성된 마늘에서는 7일 차부터 과당이 39.7%/dw 정도 생성되기 시작하여 14일차에 49.6%/dw 정도 생성되었으나, 이후 과당 함량이 감소되는 것을 볼 수 있는데 이는 생성된 과당이 HMF로 변환된 것으로 추정된다. 그리고 $60^{\circ}C$에서는 21일차까지 과당의 생성량이 6.6%/dw 정도였으나 이후 28일 경에는 급속히 증가하여 35일경에는 44.6% 정도 생성되었다. 이로써 마늘에서 HMF의 생성은 마늘 중의 탄수화물이 고온($75^{\circ}C$)에서 과당으로 변환된 후 탈수반응을 거쳐 생성됨을 알 수 있었다.

저온 경화형 초친수성 티타니아 하이브리드 졸의 제조와 친수성 특성 평가에 관한 연구 (Superhydrophilicity of Titania Hybrid Coating Film Imposed by UV Irradiation without Heat-treatment)

  • 김원수;박원규
    • 대한치과기공학회지
    • /
    • 제29권1호
    • /
    • pp.121-131
    • /
    • 2007
  • A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

  • PDF

대기 미립자 물질 PM10에 노출된 인간 표피 각질형성세포의 염증 반응에 대한 레스베라트롤과 레스베라트릴 트라이아세테이트(RTA)의 영향 (Effects of Resveratrol and Resveratryl Triacetate on The Inflammatory Responses of Human Epidermal Keratinocytes Exposed to Airborne Particulate Matter PM10)

  • 최민아;석진경;이정원;이신영;김영미;부용출
    • 대한화장품학회지
    • /
    • 제44권3호
    • /
    • pp.249-258
    • /
    • 2018
  • 대기 오염은 피부의 산화적 손상, 염증 및 노화를 일으킬 수 있다. 레스베라트롤은 폴리페놀 화합물의 일종으로 항산화, 항염증, 멜라닌 생성 억제 작용 등 다양한 생물학적 활성이 있는 한편 열과 빛에 약한 단점이 있다. 레스베라트릴 트라이아세테이트(RTA)는 레스베라트롤에 비해 안정하고, 피부 안전성과 미백 효능이 보고된 화장품 신소재이다. 본 연구의 목적은 직경 $10{\mu}m$ 미만 대기 미립자 물질(PM10)에 노출된 인간 표피각질형성세포(HEK)의 염증 반응에 대한 레스베라트롤과 RTA의 영향을 조사하기 위한 것이다. 배양된 HEK세포를 레스베라트롤과 RTA의 유무 조건에서 PM10에 노출시키고, 세포 생존율, 반응성 산소종(ROS)의 생성 및 염증성 사이토카인의 발현을 분석하였다. PM10을 처리하였을 때 세포 생존율이 감소하였고 종양괴사인자-${\alpha}$($TNF-{\alpha}$), 인터루킨-$1{\beta}$($IL-1{\beta}$), 인터루킨-6(IL-6) 및 인터루킨-8(IL-8)의 발현이 증가하였다. 레스베라트롤과 RTA는 PM10으로 유도된 세포의 사멸과 ROS 생성을 경감시켰다. PM10에 의해 증가되는 여러 염증성 사이토카인의 발현은 레스베라트롤과 RTA에 의해 경감되거나(IL-6), 증진되거나($IL-1{\beta}$), 변화하지 않았다($TNF-{\alpha}$ 및 IL-8). PM10에 의해 유도된 IL-6단백질의 발현이 레스베라트롤과 RTA에 의해 감소되었다. 본 연구의 결과는 레스베라트롤과 RTA가 대기 미립자 물질에 노출된 피부의 세포 손상과 염증 반응을 조절하는 작용이 있음을 시사한다.