• Korean journal of aerospace and environmental medicine
• /
• v.30 no.1
• /
• pp.30-33
• /
• 2020

The Republic of Korea is rapidly entering an aging society. With the aging of society, the overseas travel of the elderly is increasing rapidly. According to the Korea Tourism Organization, the number of overseas tourists aged 61 or older last year exceeded 2.5 million, of which over 80 were over 200,000. Age is no longer a limiting factor for traveling abroad, but traveling to unfamiliar places is certainly a challenge. Old people may experience a variety of problems, so special care should be taken. In particular, the aircraft cabin environment is different from the ground, so elderly travelers with respiratory or heart disease require special attention. In this paper, we want to know the precautions and how to prepare for the safe air travel for the elderly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.959-966
• /
• 2013

In this study, based on P-3CK project using aging aircraft without any design information, the structural assessments of fastener holes to repair the short edge distance defects are investigated. For this purpose, the nacelle longeron which has many defects is selected and then conservative stress is calculated by performing the static analysis of 1.5ED, 1.8ED, 2.0ED defects of longeron fastener holes. This result applies to TWIST standard load spectrum to generate flight load spectrum. Then the crack growth analysis is performed by using flight load spectrum. Through this, the validity of a repaired fastener hole is evaluated. Finally, the standard of repair and the period of maintenance for a defected fastener hole are established.

• Smart Structures and Systems
• /
• v.2 no.1
• /
• pp.25-46
• /
• 2006

Aging wiring in buildings, aircraft and transportation systems, consumer products, industrial machinery, etc. is among the most significant potential causes of catastrophic failure and maintenance cost in these structures. Smart wire health monitoring can therefore have a substantial impact on the overall health monitoring of the system. Reflectometry is commonly used for locating faults on wire and cables. This paper compares Time domain reflectometry (TDR), frequency domain reflectometry (FDR), mixed signal reflectometry (MSR), sequence time domain reflectometry (STDR), spread spectrum time domain reflectometry (SSTDR) and capacitance sensors in terms of their accuracy, convenience, cost, size, and ease of use. Advantages and limitations of each method are outlined and evaluated for several types of aircraft cables. The results in this paper can be extrapolated to other types of wire and cable systems.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.106-112
• /
• 2021

In this study, we performed a design and structural analysis of a blade-shaped antenna installation on the rear fuselage of a rotary wing aircraft operated by the military. When the structure is damaged while the aircraft is in operation, it is separated from the aircraft main structure and may collide with the rotor or blades to cause the aircraft to crash. Therefore, structural safety for the modified structure must be secured. The design requirement for the newly installed modified part were established, and the load condition was constructed by applying the load that may occur in the aircraft after the modification. Structure safety for the modified structure was secured by performing structure analysis. To analysis stress and deformation of aircraft structure, we developed finite element model and verified it by using hand calculation method. We confirmed the safety of the modified structure through the final structural integrity analysis.

• Journal of Welding and Joining
• /
• v.11 no.2
• /
• pp.53-61
• /
• 1993

One of the most interesting and promising steel groups considered for the rocket motor case, aircraft and aerospace component is the maraging(martensitic plus aging) nickel steel, developed by International Nickel Company in 1960. This material attains a very high strength with good fracture toughness by simple heat treatments which do not involve a quenching. Full strength can be obtained by "maraging" at 480.deg. for 3 hours for the 18% Ni maraging steel. The effect of heat treatments was considered on the residual stress field of 18% Ni maraging steel weldments. In experiments, various heat treatments such as stress relieve heat treatment, aging and solution heat treatment were carried out of the GTA weldments and the residual stresses were measured by using the hole drilling method. Whereas the conventional pattern of residual stress shows the stresses to be maximum along the weld centerline with tensile stress extending into the heat affected zone, the pattern in maraging steels shows the centerline stress to be compressive. After welding, a series of aging, solution heat treatment and solution heat treatment plus aging treatment were carried out and the residual stresses were measured to reveal that these heat treatments almost completely remove the welding residual stresses.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.257-264
• /
• 2022

As it takes a lot of time and money to develop an aircraft, an environment for renovating and using existing operating aircraft has been created. As a result, many old aircraft were renovated, and due to the aging of the aircraft, more demanding cable requirements were required for renovation projects, and as the number of equipment inside the aircraft gradually increased, the difficulty of system integration increased. In order to solve the difficulties of system integration through systematization of verification procedures, this paper explains VSWR, I-loss, which are the main indicators of antenna cable modification, and explains DTF, one of the problem detection methods. It also explains the elements required for cable design, the environment to be measured, and procedures, and introduces the overall process and effect of antenna cable improvement through demonstration cases.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.56-62
• /
• 2017

Because adhesively bonded joints are used in many structural systems, it is important to predict accurate adhesive strengths. Composite aircraft with many joints are easily exposed to low temperatures and high relative humidity. This paper presents a humidity aging effect on the adhesive strength of a composite single-lap joint (SLJ). The adhesive strength of the SLJ is predicted using a finite element analysis with a cohesive zone model (CZM) technique. The humidity aging effect is evaluated based on the adhesive strength and CZM parameters. A lap joint test is carried out on the composite SLJ specimens, which are exposed for four months of 100% R.H. at $25^{\circ}C$. The predicted strengths are in good agreement with experimental data, and the actual crack propagation is satisfactorily simulated using the local CZM technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.4
• /
• pp.368-374
• /
• 2008

The basic Trainer Aircraft of The Korean Air force KT-1/KO-1, which was designed and developed by Korean Technology has been a primary candidate as a replacement for the aging basic trainer or armed version for surface support operation for the nations such as Mexico, Philippine, Turkey, Venezuela and etc. In this study, competitors for the same class aircraft and the present operational status of the basic trainer of the world were identified and the fade out periods were also predicted. The result of this market analysis showed the required number of aircraft by the year 2025 for 33 countries as 4500. The exportable number of KT-1 aircraft was predicted considering the political/diplomatical environments, economic environment and also by the ability of producing same class aircraft of the country.

• 연구논문집
• /
• s.32
• /
• pp.77-84
• /
• 2002

A martensitic precipitation hardening stainless steel, 17-4PH has been widely used in the aircraft, chemical and nuclear industries for long time, owing to the excellent mechanical properties with corrosion resistance that can be achieved by simple heat treatment. The microstructure and mechanical properties of the 17-4PH stainless steel cast parts for aircraft, such as impeller, are largely affected by heat treatment condition. But the database of heat treatment has not been clearly established in the domestic investment casting industries because the domestic aerospace, industry lags behind the advanced countries. In this study, the microstructural evolution and mechanical properties of cast 17-4PH stainless steel depending on the heat treatment conditions and aging at $400^{\circ}C$ were investigated.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.209-212
• /
• 2016

항공기 사고발생시 사고조사가 착수도 되지 않은 상태에서 노후 항공기를 사고원인으로 추정하여 보도하는 사례들이 발생되고 있다. 이러한 보도형태는 항공기 정비방식의 이해부족과 항공기 노후화와 사고의 연관성에 대한 연구의 부재로 나타나는 현상으로 볼 수 있다. 이에 따라 본 연구에서는 철도 항공사고조사위원회에서 사고조사가 완료된 조사보고서를 분석하여 노후 항공기가 항공사고에 미치는 영향을 연구하였다.