• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.115-123
• /
• 1990

The purpose of this study was to examine the uses of coal ash as a type of construction material. The methods of examination were chemical anlysis, soil laboratory test and the soil vibration test. Materials used were coal ash obtained as a by-product from 5 thermal power plants in Yongdong, Yongwol, Sochon(anthracite coal) and in Samchonpo and Honam (bituminous coal). Over 70% of the coal ash consisted of silica and alumina. The fly ash grain size showed a uniform distribution from fine-sand to silt, and that of the bottom ash showed from sand to gravel. The specific gravity and density of the coal ash were low. The long term strength increased gradually due to the self-setting property resulting from pozzolanic activity. The shear strength was higher than that of general soil. Cohesion and optimum moisture content of anthracite coal ash were higher than bituminous coal ash, whereas the maximum dry density was higher in bituminous coal ash. The coal ash dynamic Young's modulous curve range was similar to that of general soil. Of the results from the soil vibration test by car-running, the size relative acceleration level in the ash pond was higher than that of natural ground, but the damping ratio was lower than that of natural ground near the ash pond. The coal ash has more advantageous engineering properties than general soil with particles of the same size. For example, the California Bearing Ratio of the bottom ash at both Yongdong and Yongwol was 77~137%. Therefore we expect that if further study is done, coal ash can be used as a construction material when reclaiming seashore, construction embankments, road construction, making right-weight aggregate, or as a general construction material.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.95-102
• /
• 2015

In this paper, the effects of sodium hydroxide (NaOH) and aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) dosage on strength properties were investigated. For evaluating the property related to the dosage of alkali activator, sodium hydroxide (NaOH) of 4% (N1 series) and 8% (N2 series) was added to 1~5% (K1~K5) dosage of aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) and 1% (C1) and 2% (C2) dosage of calcium oxide (CaO). W/B ratio was 0.5 and binder/ fine aggregate ratio was 0.5, respectively. Test result clearly showed that the compressive strength development of alkali-activated slag cement (AASC) mortars were significantly dependent on the dosage of NaOH and $AlK(SO_4)_2{\cdot}12H_2O$. The result of XRD analysis indicated that the main hydration product of $NaOH+AlK (SO_4)_2{\cdot}12H_2O$ activated slag was ettringite and CSH. But at early ages, ettringite and sulfate coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag in high dosage of $NaOH+AlK(SO_4)_2{\cdot}12H_2O$. The $SO_4{^{-2}}$ ions from $AlK(SO_4)_2{\cdot}12H_2O$ reacts with CaO in blast furnace slag or added CaO to form gypsum ($CaSO_4{\cdot}2H_2O$), which reacts with CaO and $Al_2O_3$ to from ettringite in $NaOH+AlK(SO_4)_2{\cdot}12H_2O$ activated slag cement system. Therefore, blast furnace slag can be activated by $NaOH+AlK(SO_4)_2{\cdot}12H_2O$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.304-314
• /
• 2004

The objective of this study was to investigate the effect of organic materials (compost, straw, green manure, pig manure, seed production oil cake, and industrial by products including municipal sewage sludge, industrial sewage sludge, leather processing sludge, and alcohol fermentation processing sludge) on physical properties of soils in seven paddy and four upland fields with differential soil textures, sandy loam, loam, or clay loam, etc. The investigated physical parameters were bulk density (BD), air permeability (AP), macroporosity, hardness, shear resistance, frictional resistance, water stability aggregate (WSA), and Middleton's dispersion ratio. Except for coarse sandy loam field with weak structure, a decrease in BD and shear resistance, and an increase in macroporosity and AP in plots with applying organic materials compared to plots without applying organic materials appeared. In upland fields, the positive effect of organic materials on WSA, BD, and air permeability was higher than in paddy fields. The combined plot of NPK and compost had lower BD, hardness, and shear resistance, and higher macroporosity and WSA than plot with compost. Green manure had higher positive effect on physical properties of soils compared to other organic materials and the extent of positive effect had no significant correlation with soil organic matter content. Of industrial byproducts applied in coarse sandy loam soil under upland condition, municipal sewage sludge and pig manure compost had higher effect on increase of WSA than leather processing sludge and alcohol fermentation processing sludge. Unlike WSA, there were no significant differences between industrial byproduct types in other physical properties. in silty clay loam soil under the upland condition, straw had more positive effect on soil physical parameters than hairy vetch and pig manure. Therefore, different organic materials had differently active effect on physical parameters depending on types of soil and land use. Especially, it could be thought that well-decomposed organic materials have the advantage of an increase in organic matter content, while coarse organic materials of an increase in WSA.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.1-34
• /
• 2010

We conduct a comprehensive risk analysis of household debt in Korea for the first time using the whole sample credit bureau (CB) data of 2.2 million individual debtors. After analysing debt service capacity profiles of debtor groups classified by the borrower characteristics such as income, age, occupation, credit scoring, and the type of creditor business companies, we investigate the impact of interest rate and income changes on debt service-to-income ratios (DTIs) and default rates of respective debtor groups. Empirical results indicate that debt service burdens are relatively high for low income wage earners, high income self-employed, low income capital and card loan holders, and high income mutual savings loan holders. We also find that debtors from multiple financial companies are particularly weak in their debt service capacity. The scenario analysis indicates that financial companies, with the current level of capital buffers, may be able to absorb negative consequences arising from the increase in DTIs and loan default rates if the interest rate and income changes remain modest. However, the negative consequences may fall disproportionately on non-bank financial companies such as capital, credit card, and mutual savings banks, whose debtors' DTIs are already high. We also find that the refinancing risk of household debt is relatively high in Korea as more than half of household mortgage debts are bullet loans. As the DTIs of mortgage loan holders are already high, under the current DTI regulation, mortgage loans may not be readily refinanced especially when the interest rate rises. Disruptions in mortgage loan refinancing may put downward pressure on housing prices, which may in turn magnify refinancing risk under the current loan-to-value (LTV) regulation. Overall our analysis suggests that, for more effective monitoring of household debt risk, it is necessary to combine existing surveillance schemes based on macro aggregate indicators with more comprehensive and detailed risk analyses based on micro individual data.

• Journal of Distribution Research
• /
• v.5 no.2
• /
• pp.49-68
• /
• 2001

In this chapter, we summarize the results on the optimal location selection and present limitation and direction of research. In order to reach the objective, this study selected and tested the interaction model which obtains the value of co-ordinates on location selection through the optimization technique. This study used the original variables in the model, but the results indicated that there is difference in reality. In order to overcome this difference, this study peformed market survey and found the new variables (first data such as price, quality and assortment of goods, and the second data such as aggregate area, and area of shop, and the number of cars in the parking lot). Then this study determined an optimal variable by empirical analysis which compares an actual value of market share in 1988 with the market share yielded in the model. However, this study found the market share in each variables does not reflect a reality due to an assumption of λ-value in the model. In order to improve this, this study performed a sensitivity analysis which adds the λ value from 1.0 to 2.9 marginally. The analyzed result indicated the highest significance with the market share ratio in 1998 at λ of 1.0. Applying the weighted value to a variable from each of the first data and second data yielded the results that more variables from the first data coincided with the realistic rank on sales. Although this study have some limits and improvements, if a marketer uses this extended model, more significant results will be produced.

• The Korean Journal of Pharmacology
• /
• v.23 no.2
• /
• pp.101-111
• /
• 1987

We investigated the binding properties of $(^3H)$ QNB and $(^3H)$ NMS to mAchR to elucidate the characterstics of mAchR in rat brain by using two different preparations (homogemates & intact brain cell aggregates). The binding properties of both ligands demonstrated high affinity and saturability in both experiments, however $(^3H)$ QNB showed a significantly higher maximal binding capacity than tha ot $(^3H)$ NMS 1. In rat brain homogenates; Displacement of both lignands with several mAchR antagonists resulted in competition curves in accoradnce with the law of massaction for QNB, atropine & scopolamine in thie preparation, also a similar profile was found for the quaternary ammonium analogs of atropine & scopolamine (methyl atropine & methylscopolamine) when $(^3H)$ NMS was used to label the receptors in rat brain. But when these hydrophillic antagonists were used to displace $(^3H)$ QNB, they showed interaction with high- and low-affinity binding sites in brain homogenates. Pirenzepine, the nonclassical mAchR antagonist, was able to displace both ligands from binding sites in this preparation. 2. In intact rat brain cell aggregates; Intact bain cell aggregates were used to elucidate the binding characteristics of $(^3H)$ NMS to mAchR in rat. The magnitude of binding of this ligand was related linearly to the amount of cell protein in the binding assay with a high ratio of total to nonspecific binding. mAchR antagonists displaced specific $(^3H)$ NMS binding according to the law of mass-action, while it was possible to resolve displacement curves using mAchR agonist into high-& low-affinity component. 3. Our results indicate that more hydrophilic receptor ligand $(^3H)$ QNB, displacement experiments in both tissues demonstrated that the lipid solubility of a particulr mAchR ligand might play an important role in determining its profile of binding to the mAchR, and the concentrations of mAchR in rat brain are both on the cell surface (membrane-bound receptor) and in the intracelluar membrane (intermembrane-bound receptor). 4. The results are discussed in terms of the usefulness of dissociated intact rat brain cells in studying mAchR in central nervous system.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.205-217
• /
• 1996

Today in the industrial society, the urban park is the place for citizens' health, recreation, exercise, and education. This is a very important place as a fine sight and maintenance of public security. As the results of rapid economic growth during the last thirty years, citizens are in the age of material civilization and are challenged with many serious urban problems such as pollution, noise, traffic congestion, human alienation, etc. Rapid material civilization brought to citizens' mental and physical diseases. To some of the problems, it is necessary that we should have proper leisure and recreation facilities, and that we should have the active, positive posture to them. Especially we need the out door recreational spaces and facilities. But nowadays the urban parks are given little thought in spites of the necessity of parks which should be used as a recreational spaces in the urban areas. So, This study attempt to comprehend the function, quantity and quality of the urban park system in Taegu. It is clear that the quantity is inappropriate. Because of inappropriate disposition and management, its coefficiency of utilization is low. In view of the population and park ratio, Dong Gu, Nam Gu, Suseong Gu and Dalseong Gun have comparative good, environments. However, Dalseo Qu, Seo Gu and Jung Gu have less geographical features. There are some methods to provide expansion of the aggregate of urban parks. We can use the school-grounds and their facilities. which were moved from C.B.D. to the outskirts of Daegu, or some parts of urban redevelopment, or the riverside of Sincheon river. In the urban park-program, users' satisfaction-factors are analyzed. We must reconsider the efficiency. The above problems are improved. Active administration and inhabitants' Positive participation are demanded so that the sound development of cities and daily life-surroundings are promoted.

• Journal of the Korean Chemical Society
• /
• v.67 no.2
• /
• pp.81-88
• /
• 2023

The contribution of hydrophobic residues to the protein folding reaction was studied by using HubWA variant proteins with I and L to V mutation. Folding kinetics of all V variant proteins was observed to be satisfied by a three-state on-pathway mechanism, U ⇌ I ⇌ N, where U, I, and N represent unfolded, intermediate, and native state, respectively. Three-state folding reaction was quantitatively analyzed and the free energy of folding of each elementary reactions and overall folding reaction, ΔG^o_UI, ΔG^o_IN, and ΔG^o_UN, were obtained. From the ratio of free energy difference between the variant protein and HubWA, ΔΔG^o_UI/ΔΔG^o_UN (ΔΔG^o_UI = ΔG^o_UI (variant protein) - ΔG^o_UI (HubWA) and ΔΔG^o_UN = ΔG^o_UN (variant protein) - ΔG^o_UN(HubWA)), the contribution of hydrophobic residues to HubWA folding was analyzed. The residues which are located in the hydrophobic core between α-helix and β-sheet, I3, I13, L15, I30, L43, I61 and L67, showed ΔΔG^o_UI/ΔΔG^o_UN value of ~0.5 when each of these residues was mutated to V, indicating that these residues form relatively solid hydrophobic core in the intermediate state. Residues located at the end of secondary structures and loop, I23, L69 and I36 showed ΔΔG^o_UI/ΔΔG^o_UN value below 0.4 when each of these residues was mutated to V, indicating that the region containing these residues are loosely formed in the intermediate state. V17A, L50V and L56V showed fairly high ΔΔG^o_UI/ΔΔG^o_UN value of ~0.8. Since L50 and L56 are located in the region containing long loop (residue 46 to 62), it is suggested that the high ΔΔG^o_UI/ΔΔG^o_UN value of these residues prevents the formation of aggregate at the early stage of folding reaction.

• Journal of radiological science and technology
• /
• v.6 no.1
• /
• pp.131-181
• /
• 1983

After the investigation on, and the analysis of, the educational system for medical technicians and the present educational situation for medical technologies in this country, the following conclusions were drawn. 1. As of March 1983 the current academic system for education in medical technologies included the regular 4-year college courses and those of the 2-year professional junior college courses. But except in the cases on clinical pathology and physical therapy, there were no college-level departments. Particularly, no educational institutions, at whatever level, had a department for working therapies. 2. The total number of credits needed for graduation from a department of medical technologies was 150 points at a regular 4-year college and 85 to 96 points at a 2-year professional college. The obligatory minimum number of credits for a student at a professional college was set at 80 points and above. 3. As for the number of the educational institutions for medical technologies in this country, there were one regular college and 14 professional colleges, a total of 15 institutions. As many as 14 colleges had departments of clinical pathology, 12 had departments of Radiotechnology, 11 had departments of physical therapy, 12 had departments of dental technology, and eight had departments of dental hygiene. 4. The total capacity of the professional colleges in admitting new enrollment each year were 1,920 for clinical pathology, 1,552 for radiology, 1,012 for physical therapy, 1,334 for dental technologies, 828 for dental hygiene, an aggregate of 6,646 for all of the professional college departments. 5. The total number of graduates from the 12 professional colleges by department during the period of 1965-83 were 7,595 for clindical pathology, 4,768 for radiology, 2,821 for physical therapy, 3,000 for dental technologies, and 1,787 for dental hygiene, totalling 19,971 for all departments in the professional colleges. 6. In the state examination for licensed medical technicians, 12,446 have passed from among the total of 26,609 participants, representing a 45% passing ratio. By departments the ratios showed 44% for clinical pathology, 39.7% for radiology, 51.2% for physical therapy, 42.5% for dental technology, 72.5% for dental hygiene and 73.1% for working therapy. 7. As for the degree of satisfaction shown by the people in this field, 52.2 percent of the teaching staffs who responed to the questionaires said they were satisfied with their present profession, while the great majority of medical technicians(66%) replied that they were indifferent to the problem. 8. The degree of satisfaction shown by the students on their enrollment in this particular academic field was generally in the framework of indifference(43.7%), but mere students(36.5%) were satisfied with their choice than those were not satisfied(14.4%) 9. As for the student's opinions on the lectures and practicing hours, a good many students replied that, among such courses as general science and humanities courses the basic medical course, the major course and practicing hours, the hours provided for the general courses(47.1%) and practicing(47.6%) were insufficient. 10. When asked about the contents of their major courses, comparatively few students (23.6%) replied that the courses were too difficult, while a convincing majority(58.5%) said they were neither difficult nor easy. As for the appropriateness of the number of the present teaching staffs, a great majority(71.0%) of the students replied that the level of the teaching personnel in each particular field was insufficient. 11. Among the students who responded to the poll, good part of them(49.5%) wanted mandatory clinical practicing hours, and the the majority of them(64.6%) held the view that the experimental and practicing facilities of their schools were insufficient. 12. On the necessity of the attached hospitals, 71.1% of the teaching staffs and 58.0% of the medical technicians had the opinion that this kind of facility was indispensable. 13. As for the qualifications for applicants to the state examination in the licensing system for medical technicians, 52.2% of the teacher's and 36% of the medical technicians replied that the present system granting the qualifications according to the apprenticeship period should be abolished. 14. On the necessity of improving the present system for education in medical technologies, an overwhelming majority(94.4% of the :caching staffs, 92.0% of the medical technicians and 91.9% of students) of these polled replied that the present system should be changed for the better. 15. On the method of changes for the present educational system, a great majority(89.4% of the teaching staffs, 80.4% of the medical technicians and 90.1% of the students) said that the system must be changed so that it fits into the reality of the present day. 16. As for the present 2-year program for the professional colleges, 61.6% of the teachers, 72.0% of the medical technicians and 38.8% of the students expressed the hope that the academic period would be extended to four regular years, hemming a full-fledged collegelevels program. 17. On the life-long eductional system for medical technicians, there was a considerable number of people who expressed the hope that an open university system(38.9% of the teaching staffs, 36.0% of the medical technicians) and a graduate school system would be set up. 18. As for the future prospects for medical technicians as professionals, the optimists ana pessimists were almost equally divided, and 41.1% of the teaching staffs 36.0% of. the technicians and 50.5% of the students expressed an intermediate position on this issue.