• Composites Research
• /
• 제35권2호
• /
• pp.69-74
• /
• 2022

본 연구에서는 공정적 간편함으로 전자 패키징 분야의 배선 및 자동차 업계, 전자 제품 등 광범위한 범위에 사용되고 있는 도전성 페이스트를 다양한 공정조건으로 제조한 후, 열적, 기계적, 전기적 특성을 분석 및 기계적 특성에 대한 시뮬레이션 연구를 진행하여 최적의 도전성 페이스트 제조 공정 조건을 확립하고자 하였다. 우선 도전성 페이스트의 필수 구성 요소인 바인더 수지를 종류를 다양하게 설정하여 도전성 페이스트를 제조하였고, 열전도도, 인장강도 및 연신율 등의 특성을 분석하였다. 바인더 수지 중, 유연 에폭시 소재를 적용한 도전성 페이스트의 물성이 가장 우수하였으며, 도전성 페이스의 물성 data base를 토대로 하여 기계적 특성에 대한 시뮬레이션 연구를 진행하였다. 기계적 특성에 대한 시뮬레이션 결과, Ag flake 부피 분율이 60%일 때 가장 우수한 물성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.546-546
• /
• 2012

Traditional screen printing is still a dominant method to print electrodes on c-Si solar cells. In order to achieve higher efficiency for c-Si solar cells, improvement of the electrode material is one of the key approaches. Shadowing loss can be reduced by using high aspect ratio finger electrode with width of finger electrode less than 80um. The rheological properties of Ag paste for applying c-Si solar cells are improved by using Ag nanowires. The printing properties including the aspect ratio of printed electrode can be improved with higher Thixotropic index (T.I.) values.

• 대한화학회지
• /
• 제38권10호
• /
• pp.734-740
• /
• 1994

Ag(I) 이온의 정량을 위해 cinchonidine으로 변성된 탄소 반죽전극(carbon paste electrode : CPE)을 제작하여 순환 전압-전류법 및 시차펄스 전압-전류법(differential pulse voltammetry:DPV)을 사용하여 정량하였다. Ag(Ⅰ)이온의 검출한계는 순환 전압-전류법으로는 $1.0 {\times}10^{-6}$ M, 시차펄스 전압-전류법에서는 $8.0{\times}10^{-9}$ M (${\pm}$0.6%)이었다. Ag(I)이온의 최적 분석조건은 pH 7, 담그는 시간은 20분, 그리고 탄소 분말에 대한 cinchonidine의 함량은 50% (w/w)였다. 방해 작용이 예상되는 다른 여러 종류의 금속 이온에 대하여 실험한 결과 Hg(II)이온을 제외한 다른 금속 이온 용액에서는 25% Ag(I) 이온 전류 크기가 감소하였다. 또한 Mn(II)이온이 존재할 때 pH 9에서 큰 방해 작용을 나타내었다.

• 공업화학
• /
• 제29권6호
• /
• pp.782-788
• /
• 2018

서브 미크론 구리-은 코어-쉘 Cu@Ag 입자를 초음파화학과 결합된 금속교환 반응으로 합성하고 인쇄용 전자부품을 위한 저렴한 전도성 페이스트 적용을 평가하였다. 코어-쉘의 합성을 위한 반응에서 코어로 사용된 $Cu_2O/Cu$ 복합체의 $Cu_2O$는 초음파화학 반응으로 Cu로 환원되고 Cu 원자는 Ag의 금속교환 반응의 환원제로 작용하여 코어 표면에 Ag가 코팅된 코어-쉘 구조를 얻었다. TEM-EDS와 TG-DSC를 이용하여 서브 미크론 입자의 코어-쉘 구조를 확인하였다. 70 wt% Cu@Ag를 용매에 분산시킨 전도성 페이스트를 결합제와 습윤제를 사용하여 제조하고, 스크린 인쇄법을 사용하여 폴리아미드 필름상에 코팅하였다. Ag 함량이 8 at%와 16 at%인 Cu@Ag 입자를 함유하는 인쇄된 페이스트 필름은 공기 중의 $180^{\circ}C$에서 소결한 후 각각 96.2와 $38.4{\mu}{\Omega}cm$의 낮은 비저항 값을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.575-579
• /
• 2004

Package reliability test was conducted to investigate the effect of solder paste composition at BGA Package. It was found that the shape and size of the phase form are affected by the processing parameters. The material have used to fill in the via was Sn/36Pb/2Ag and Sn/0.75Cu type solder paste. Sn/36Pb/2Ag and Sn/0.75Cu paste were fabricated on Tape-BGA substrates by screen printing process, and via ball mount data were characterized with variations of dwell time of 85 seconds at reflow peak temperature at 22$0^{\circ}C$ or 24$0^{\circ}C$. The test condition was MRT 30 $^{\circ}C$/60 %RH/96 HR. Failures formed of a ball-off in solder paste process were observed by using a Optical Microscope and SEM(Scanning Electron Microscope). It was concluded that intermetallic layer growth played important roles in increasing solder fatigue strength for addition of Ag composition. The degradation of shear strength of solder composition is discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1248-1251
• /
• 2005

In PDP, a transparent dielectric is formed on a front glass substrate so as to cover bus electrodes (Ag). During the fabrication process, sometimes, a transparent dielectric reacts with bus (Ag) electrode in the range of $560-600^{\circ}C$, and the reaction gives the dielectric its yellow coloration, what is called "yellowing phenomena". In this paper, we investigated the reaction between bus electrode and transparent dielectric covered with different frit content in Ag paste.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.54-54
• /
• 2009

Ag thick film has been used for electrode materials with the excellent conductivity. Ag electrode is used in screen-printed silicon solar cells as a electrode material. Compared to photolithography and buried-contact technology, screen-printing technology has the merit of fabricating low-priced cells and enormous cells in a few hours. Ag paste consists of Ag powders, vehicles and additives such as frits, metal powders (Pb, Bi, Zn). Frits accelerate the sintering of Ag powders and induce the connection between Ag electrode and Si wafer. Thermophysical properties of frits and reactions among Ag, frits and Si influence on cell performance. In this study, Ag pastes were fabricated with adding different kinds of frits. After Ag pastes were printed on silicon wafer by screen-printing technology, the cells were fired using a belt furnace. The cell parameters were measured by light I-V to determine the short-circuit current, open-circuit voltage, FF and cell efficiency. In order to study the relationship between the reactivity of Ag, frit, Si and the electrical properties of cells, the reaction of frits and Si wafer on was studied with thermal properties of frits. The interface structure between Ag electrode and Si wafer were also measured for understanding the reactivity of Ag, frit and Si wafer. The excessive reactivity of Ag, frit and Si wafer certainly degraded the electrical properties of cells. These preliminary studies suggest that reactions among Ag, frits and Si wafer should optimally be controlled for cell performances.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.15-24
• /
• 2010

Photovoltaic solar cells are all in the incident because they are not converted into electrical energy, high-efficiency solar cells in order to reduce the loss of elements must be. Significant factor in the loss of solar cells, optical loss and electrical loss can be divided into. Optical losses occur when the sun will be joined on the surface of the reflection, the shadow loss due to electrodes, and the losses are in the solar wavelengths. Commercialization is currently the most common solar cells on the front of the light incident on the electrode is formed. Therefore, the shadow caused by the electrode to cover the dead area of the sun, due to factors that hinder the absorption of sunlight which is shadowing them and conversion efficiency of solar cells is the inhibition factor. These barriers to eliminate the electrode linewidth reduces the shadowing to reduce, but simply of the electrode line width is reduced electrode area by reducing the series resistance elevates this because to improve the electrode Aspect ratio(height/width) to increase Ag development of paste is required. In this study, aspect ratio of screen-printing method to increase the electrode Ag paste composition of the binder for the characterization of rheology in the shadow of the electrode by reducing the optical loss of the photoelectric conversion efficiency of solar cells to boost the performance measures was. Properties and printability of the paste, the binder resin sintered characteristics that affect the thermal properties are excellent with a good screen printability acrylic resin, ethyl cellulose, using a resin were evaluated. Prepared paste rheology properties, was formed to evaluate the electrode conductivity and aspect ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.369-372
• /
• 2008

Black matrix and Ag electrode with uniform line pitches were successfully fabricated through the photolithographic process by using the photosensitive black pastes and Ag pastes with optimized photosensitive properties for high resolution PDPs. The photosensitivity of the black and Ag pastes in the photolithographic process was investigated with the variation of photosensitive BM and Ag pastes and the photolithography process conditions. The important components and formulation of the photosensitive BM and Ag paste we discussed.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.130-133
• /
• 2002

Solder leaching resistance of the metal electrode is an important factor with regard to adhesion properties of ceramic substrate. In the Low Temperature Co-fired Ceramics (LTCC), Ag-Pd or Ag-Pt pastes are used instead of pure Ag paste to prevent leaching. Solder leaching behavior of the Ag-Pd paste in relation to LTCC raw material powder size was investigated. First fabrication of LTCC green tape with different particle size was done. LTCC substrates with Ag-Pd electrode were prepared using conventional multilayer ceramic process. Dipping test was performed to test solder leaching behavior of the electrode. Ag-Pd electrode on LTCC substrate with smaller particle size achieved higher solder leaching resistance.