• 대한화학회지
• /
• 제20권6호
• /
• pp.486-493
• /
• 1976

AgI 가루에 PVC를 섞어 Infrared Pellet Presser로 눌러 만든 Pellet을 이용하여 막전극을 만들고 이것을 지시전극으로 사용하여 $Ag^+$의 활동도에 대한 전위를 측정하였다. 이 막전극의 특성을 순수한 AgI pellet와 PVC로 표면을 입힌 AgI pellet을 이용한 두 막전극의 특성과 비교하였다. 이들 막전극의 은이온 활동도에 대한 감응은 은이온의 농도가 $10^{-1}$M에서 $10^{-6}$M 까지의 범위에서 좋은 직선을 보여준다. 그러나 그 중에서도 AgI가루에 PVC를 섞어서 만든 막전극이 Nernstian 기울기에 가장 잘 맞고 견고하고 장시간 사용할 수 있어 가장 우수함을 알 수 있었다. 이 전극은 은이온 이와의 다른 양이온에 대하여는 거의 감응하지 않고 할로겐화이온, 즉$I^-,CI^-,Br^-,CN^-$에 대한 감응도는 $10^{-1}$M에서 $10^{-6}$M까지 직선관계를 유지하였다. 이 전극은 단일 할로겐화이온 뿐 아니라 할로겐화이온의 혼합시료 용액의 전위차 은법적정에 지시전극으로 이용될 수 있음을 알았다.

• 대한화학회지
• /
• 제38권10호
• /
• pp.734-740
• /
• 1994

Ag(I) 이온의 정량을 위해 cinchonidine으로 변성된 탄소 반죽전극(carbon paste electrode : CPE)을 제작하여 순환 전압-전류법 및 시차펄스 전압-전류법(differential pulse voltammetry:DPV)을 사용하여 정량하였다. Ag(Ⅰ)이온의 검출한계는 순환 전압-전류법으로는 $1.0 {\times}10^{-6}$ M, 시차펄스 전압-전류법에서는 $8.0{\times}10^{-9}$ M (${\pm}$0.6%)이었다. Ag(I)이온의 최적 분석조건은 pH 7, 담그는 시간은 20분, 그리고 탄소 분말에 대한 cinchonidine의 함량은 50% (w/w)였다. 방해 작용이 예상되는 다른 여러 종류의 금속 이온에 대하여 실험한 결과 Hg(II)이온을 제외한 다른 금속 이온 용액에서는 25% Ag(I) 이온 전류 크기가 감소하였다. 또한 Mn(II)이온이 존재할 때 pH 9에서 큰 방해 작용을 나타내었다.

• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.33-36
• /
• 2015

It has increased several decades in the field of Indium Tin Oxide (ITO) transparent thin film, However, a major problem with this ITO thin film application is high cost compared with other transparent thin film materials[1]. So far, in order to overcome this disadvantage, we show that a transparent ITO/Ag/i-ZnO multilayer thin film electrode would be more cost-effective and it has not only highly transparent but also conductive properties. The aim of this research has therefore been to try and establish how ITO/Ag/i-ZnO multilayer thin film would be more effective than ITO thin film. Herein, we report the properties of ITO/Ag/i-ZnO multilayer thin film by using optical spectroscopic method and measuring sheet resistance. At a certain total thickness of thin film, sheet resistance of ITO/Ag/i-ZnO multilayer was drastically decreased than ITO layer approximately $40{\Omega}/{\Box}$ at same visible light transmittance. (minimal point $5.2{\Omega}/{\Box}$). Tendency, which shows lowly sheet resistive in a certain transmittance, has been observed, hence, it should be suitable for transparent electrode device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1248-1251
• /
• 2005

In PDP, a transparent dielectric is formed on a front glass substrate so as to cover bus electrodes (Ag). During the fabrication process, sometimes, a transparent dielectric reacts with bus (Ag) electrode in the range of $560-600^{\circ}C$, and the reaction gives the dielectric its yellow coloration, what is called "yellowing phenomena". In this paper, we investigated the reaction between bus electrode and transparent dielectric covered with different frit content in Ag paste.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.61.2-61.2
• /
• 2010

Ag thick-film has usually been used for the front electrode of Si solar cells with the outstanding electrical properties. Ag paste consists of Ag powers, vehicles, frits and additives. Ag paste has broadly been screen-printed on the front side of Si wafer with the merits of low cost and simplicity. The optimal contact formation between Ag electrodes and Si wafer in the front electrode during a fast firing has been considered as the key factor for high efficiency. Although the content of frit in Ag pastes is less than 5wt%, it can profoundly influence the contact formation between Ag and Si under the fast firing. In this study, the effects of lead-free frits on the contacts between Ag and Si were studied with the thermal properties and compositions of various frits. Our experimental results showed that the electrical properties of cells were related to the interface structures between Ag and Si. It was found that current path of electrons from Si to Ag would be possible through the tunneling mechanism assisted by tens of nano-Ag recrystals on $n^+$ emitter as well as Ag recrystals penetrated into $n^+$ emitter layers. These preliminary studies will be helpful for designing the proper frits for the Ag pastes with considering the properties of various Si wafers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.349-349
• /
• 2010

Great performance of many semiconductor devices requirs the use of low-resistance ohmic contact. Typically, transmission line method (TLM) patterns are used to measure the specific contact resistance between silicon and metal. In this works, we investigate contact resistance for metal dependent (Cr/Ag, Ni) using TLM pattern based on silicon-on-insulator (SOI) wafer. The electrode with Ni linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in accumulation part, but non-linearly increase in inversion part. In additional, the electrode with Cr/Ag linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in inversion part, but non-linearly increase in accumulation part.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.115-120
• /
• 2021

In this study, composite transparent electrodes were fabricated either from a conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) or silver nanowire (AgNW). Three transparent electrodes such as PEDOT:PSS, PEDOT:PSS and AgNW mixture, and AgNW were fabricated. As for a transparent electrode, measured sheet resistance values were 89.6, 60.6 and 28.6 Ω/sq, and the transmittance values were 80.2, 82.0 and 83.8% while surface roughness (Rq) values were 4.1, 8.1, 20.4 nm for PEDOT:PSS, PEDOT:PSS and AgNW mixture, and AgNW, respectively. To verify the overall performance of these composite electrodes, we applied these electrodes to the top electrode of the solution-processed organic solar cells (OSCs). PEDOT:PSS provided the best performance with a fill factor (FF) of 51.2% and a photoconversion efficiency (PCE) of 2.2%, while traditional metal top electrode OSC provided FF of 60.5% and PCE of 3.1%.

• Elastomers and Composites
• /
• 제42권2호
• /
• pp.112-118
• /
• 2007

EPDM을 결합재로 사용하고, HRP를 고정시켜 과산화수소 정량을 위한 탄소반죽전극을 제작하고, 바이오센서로서 실용화 가능성을 살펴보기 위하여 전기화학적 특성을 고찰하였다. 실험 농도 영역에서 신호의 Lineweaver-Burk 도시가 보여준 좋은 직선성은 촉매력이 효과적으로 발휘될 수 있도록 EPDM이 전극 물질 속에서 HRP를 잘 고정하고 있음을 보여 주었으며, 이는 EPDM이 전극물질 결합재로 활용될 수 있음을 말하는 것이다. 전극은 낮은 전극전위($0.0\sim-1.0$ V vs. Ag/AgCl)에서 작동하였으며, 이 때 얻어진 신호는 높은 감도와 재현성을 보여 주었다. 특히 건조된 고무의 기계적 안정성은 탄소반죽 전극 실용화의 난제였던 실리콘 오일 결합재의 대체가능성을 열어주었다.

• 한국환경과학회지
• /
• 제5권5호
• /
• pp.677-682
• /
• 1996

페로브스카이트 ($La_{0.9}$$Sr_{0.1}$$CuO_3$) 전극을 이용하여 이산화탄소를 메탄올, 에탄올등의 알콜류와 아세트 알데히드로 전해환원하였다. 전해환원 실험은 전류밀도 100mA/c$m^2$ 그리고 환원 전위 -2 to -2.5 V vs. Ag/AgCl에서 수행하였다. 실험결과 메탄올은 11.6%, 에탄올은 15.3% 그리고 아세트알데히드는 6.2 %의 최고효율을 나타내었다. 따라서 페로브스카이트 전극은 알콜생성 면에서 기타 다른 금속전극에 비하여 매우 우수한 효과를 보여주었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.490.1-490.1
• /
• 2014

The ZnO nanowire (NW)-based nanogenerators (NGs) can have rectifying current and potential generated by the coupled piezoelectric and semiconducting properties of ZnO by variety of external stimulation such as pushing, bending and stretching. So, ZnO NGs needed to enhance durability for stable properties of NGs. The durability of the metal electrodes used in the typical ZnO nanogenerators(NGs) is unstable for both electrical and mechanical stability. Indium tin oxide (ITO) is used as transparent flexible electrode but because of high cost and limited supply of indium, the fragility and lack of flexibility of ITO layers, alternatives are being sought. It is expected that carbon nanotube and Ag nanowire conductive coatings could be a prospective replacement. In this work, we demonstrated transparent flexible ZnO NGs by using CNT/Ag nanowire hybrid electrode, in which electrical and mechanical stability of top electrode has been improved. We grew vertical type ZnO NW by hydrothermal method and ZnO NW was coated with hybrid silicone coating solution as capping layer to enhance adhesion and durability of ZNW. We coated the CNT/Ag nanowire hybrid electrode by using bar coating system on a capping layer. Power generation of the ZnO NG is measured by using a picoammeter, a oscilloscope and confirmed surface condition with FE-SEM. As a results, the NGs using the CNT/Ag NW hybrid electrode show 75% transparency at wavelength 550 nm and small change of the resistance of the electrode after bending test. It will be discussed the effect of the improved flexibility of top electrode on power generation enhancement of ZnO NGs.