• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.786-793
• /
• 1995

Ag-doped $Y_1$Ba$_2$Cu$_3$O$_{7-y}$ samples have been prepared by solid state reaction. High-Tc super conductivity, microstructure and mechanical property of the Ag-doped $Y_1$Ba$_2$Cu$_3$O$_{7-y}$ samples have been studied. As the Ag content increased, the grain size of $Y_1$Ba$_2$Cu$_3$O$_{7-y}$, increased and connectivity between the grains was improved, and the sample becomed denser and harder than the undoped. From the result, it is concluded that Ag addition reduced weak link and weak coupling between grains and led to the strong coupling. Furthermore, the anisotropy of crytstal structure was decreased and thermal stability, mechanical property of $Y_1$Ba$_2$Cu$_3$O$_{7-y}$-Ag were improved.mproved.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.48-53
• /
• 1995

The structure, magnetic properties and magnetoresistance phenorrena of Ag-Co nano-granular alloy films prepared by a thermal co-evaporation were studied. Supersaturated fee Ag-Co solid solution and fee Co clusters coexisted in the as-deposited state. As Co content increases from 20 to 55 at.% Co, the grain size of the Ag matrix decreases from 147 to $67{\AA}$, and the Co solubility in the Ag matrix increases from 2.5 to 6.7%. Ag-Co alloy films having composition below 25 at.% Co showed mainly superparamagnetic behavior and above that composition, they showed both paramagnetic and ferromagnetic l::ehavior in the as-deposited state. The maximum magnetoresistance of 19% at R. T. and 10 kOe was obtained in the as-deposited 30 at.% Co alloy film. Heat treatment did not improve the MR ratio tecause most of the Co was already precipitated in the as-deposited state.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.94-104
• /
• 1993

The compositional variation of electrums from gold-silver and antimony deposits in the Dunjeon Baegjeon mining area, range from 22.6 to 69.5 atom% of Ag. Ag contents in electrums vary with paragenetic sequences and associated minerals. Ag contents increase from core to margin in a single grain. Compositional range of electrums from the North ore deposits of the Dunjeon gold mine are from 22.6 to 29.5 atom% of Ag. Electrums contain Cu(0.40 to 0.55 atom%) and Bi(0.35 to 0.67 atom%). Composition of electrums from the South ore deposits of the Dunjeon gold mine vasies from 33.6 to 69.5 atom% of Ag. Cu and As contents in electrums range from 0.20 to 1.92 and from 0.70 to 1.90 atom%, respectively. As the content of Ag in electrums increase, the contents of Bi and As in electrums increase but that of Cu decrease. Electrums of the Baegjeon gold deposits contain 35.6 to 63.5 atom% of Ag, suggesting that Au contents in electrums associated with base metal sulfied be higher than those associate with Ag-minerals. Ag/Au rations in electrums increase with decreasing temperature, salinity and $fs_2$ of the mineralizing solution.

• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.347-361
• /
• 1991

The Sangeun ore deposit is located in a volcanic belt within the Gyeongsang Basin in south western Korea. The ore deposit is of representative epithermal Au-Ag quartz vein type developed in lapilli tuff. This paper presents the mineralization with special emphasis on mineral zoning of the deposits. Principal points are summarized as follows: (1) Four stages of mineralization are recognized based on macrostructures. From ealier to later they are stage I(arsenopyrite-pyrite-quartz), stage II(Au-Ag bearing Pb-Zn-quartz), stage III(barren quartz), and stage IV(dickite-quartz). (2) Electrum principally occurs with arsenopyrite and galena in stage II, and has chemical compositions of 72.9-67.1 Ag atom %, and has Ag/Au ratio of 2.69-2.04. (3) Sphalerite varies in its FeS content according to the mineralization stages; 22.03-18.60 mole % FeS and 1.33-0.23 mole % MnS in stage IB, 16.11-8.64 mole % FeS and 1.33-0.23 mole % MnS in stage II. (4) Alteration zones of mineral assemblage, from the vein to the wall-rock, consist of sericite - quartz - pyrite, sericite - quartz - dickite, sericite - chlorite plagioclase respectively.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.60-65
• /
• 2008

A study on the removal of silver(Ag) in copper electrolyte was carried out to produce high purity copper by using various method such as ion exchange resin, activated carbon adsorption, copper cementation with powder and wire, CuS precipitation. Parameters, such as reaction time, reaction temperature, addition amount etc. were investigated to determine the effective condition of silver removal. CuS precipitation and ion exchange using Lewatit TP214 was found to be effective. Especially, silver content in copper electrolyte was reduced from 10 ppm to less than 0.1 ppm by ion exchange with Lewatit TP214.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.162-167
• /
• 2003

The critical current value of Bi-2223/Ag tape can be influenced by various factors. In particular, it was known that properties of precursor powders could affect the formation of Bi -2223 and grain growth rate of the same. Since, moistures and organic matters can easily contaminate the precursor powders of Bi-2223 tapes and degrade properties of superconductors, the precursor powders should be kept in optimal conditions to minimize contamination. In this study, the effect of moisture and organic matters has been investigated. A Bi-2223/Ag tape contaminated with a large amount of moisture and organic matter has been characterized by low critical current values and bubbling. It has been found that as the quantity of moisture increases, the Bi-2223 phases are formed at lower temperature and the amount of non-superconducting phase increases.

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.5-10
• /
• 2014

A study that copolymerized Ag nanoparticle and furfuryl isocyanate with the crosslinking agent EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) and the initiating agent AIBN (azobisisobutyronitrile) is presented. Measurement of the physical characteristics of the produced macromolecule showed that the water content is 32.08~32.67%, refractive index 1.446~1.448, visible light transparency 83.2~67.6%, contact angle $68.2{\sim}83.5^{\circ}$ and tensile strength 0.541~0.755 kgf. It is also demonstrated that the addition of Ag nanoparticles is associated with the reduction of UV-B transmittance and increase in tensile strength. The results show that the produced copolymer can be used as a material for ophthalmic lenses with durability and UV-blocking properties.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.853-859
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV-1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in the same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the other compared alloys.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.400-403
• /
• 1998

The germanium content of the cultivated Korean medicinal herbs in several growing district was determined by adsorption stripping voltammetry. The optimum conditions in germanium determination were as following: deposition time; 120 sec, deposition potential; -0.9 volts vs. Ag/AgCl, and frequency; 100 Hz in $5.0{\times}10^{-2}M$ perchloric acid supporting electrolyte solution containing $8.0{\times}10^{-2}M$ catechol. Calibration curve was shown a good lineality in the range of 0.4 ppb to 2.0 ppm and the detection limit was 0.08 ppb. There was a large difference in content of the cultivated hermit leaf according to growing district such as 29.7~385.7 ppm and the content of nontreated hermit leaf was higher than the processed health foodstuffs. The content of the Korean ginseng (5 years) was 83 ppm while the Korean herb of life was 214 ppm.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.39-50
• /
• 2008

We have manufactured Ag pastes for gravure printing by adding different solvent contents. Then the gravure printability and properties of conductive patterns gravure-printed by the different rheology characteristics of pastes were investigated. The dispersity of pastes was increased and the viscosity and shear rate dependence of viscosity for pastes were decreased by increasing the solvent content. Also storage modulus G', loss modulus G" and angular frequency value when G" starts to be bigger than G' of pastes were increased by decreasing the solvent content. These mean a flow drop of paste. As a result of gravure printing using two plates which have different line counts(175line and 350line), conductive patterns printed using 175line were spreaded more but Ag packing, thickness and conductivity of the conductive patterns were better than those printed using 350line. And the spread values of conductive patterns were increased with solvent contents but the best properties for Ag packing, surface roughness and conductivity of the conductive pattern were obtained by paste (3) which has 550cps of viscosity at $100s^{-1}$ and tan ${\delta}$ > 1 at 10rad/s. As a result of gravure printing using 350 line plate and paste (3), the conductive pattern has $1.2{\mu}m$ of film thickness and $1.9{\times}10^{-5}{\Omega}{\cdot}cm$ of conductivity.