• Title/Summary/Keyword: After-treatment

Search Result 34,554, Processing Time 0.07 seconds

Effects of Gypsum on Dry Matter Yield and Chemical Composition of Alfalfa in Reclaimed Tidal Land with Soil Dressing (객토 간척지에서 석고처리가 알팔파 건물수량 및 사료성분에 미치는 영향)

  • Kim, Ji Yung;Jo, Hyun Wook;Lee, Bae Hun;Jo, Mu Hwan;Kim, Byong Wan;Sung, Kyung Il
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.41 no.4
    • /
    • pp.223-233
    • /
    • 2021
  • The objective of this study was to investigate the effect of gypsum on the dry matter yield and the chemical composition of alfalfa in reclaimed tideland with soil dressing. The experimental site was Sukmoon reclaimed tideland. The tideland was reclaimed approximately 17 to 33 years ago and the 70 cm of soil was top-dressed. The soil that covers the reclaimed tideland brought from the island did not treat di-salinized. Treatments were consisted of three groups; control group where no gypsum (G0) was applied and two experimental groups where 2 ton/ha (G2) and 4 ton/ha (G4) of gypsum were applied, respectively. The first harvest was conducted when the alfalfa reached early flowering (open the flower 10%), and after that subsequent harvest was conducted at approximately 35 days intervals. The dry matter yield of the alfalfa showed that G2 was significantly higher in the first year than G0 and G4, and G2 tended to be higher in the second year than G0 and G4, although there were no significant differences between treatments. The reason for the high dry matter yield in G2 was that the soil pH and EC of the soil were at marginal and ideal levels and the coverage and alfalfa botanical composition were also high. In both years, there were no differences in the crude protein, neutral detergent fiber and acid detergent fiber contents and relative feed value between gypsum treatments. Meanwhile, the results in the first and second years showed that the alfalfa dry matter yield were negatively affected by droughts stress in spring and concentrated precipitation in summer. Therefore, this study suggests gypsum treatment in reclaimed tidal land could increase the dry matter yield of alfalfa, and 2 ton/ha of gypsum was the optimum rate.

Effect of High-Fat Diet-induced Obesity on the Incidence and Progression of Prostate Cancer in C57BL/6N Mouse (C57BL/6N 마우스에서 전립선암의 발병률 및 진행에 대한 고지방식이-유도 비만의 영향)

  • Choi, Yun Ju;Kim, Ji Eun;Lee, Su Jin;Gong, Jeong Eun;Jin, Yu Jeong;Lee, Jae Ho;Lim, Yong;Hwang, Dae Youn
    • Journal of Life Science
    • /
    • v.32 no.7
    • /
    • pp.532-541
    • /
    • 2022
  • Obesity induced by high-fat diet (HFD) is verified as a strong risk factor and negative prognostic factor for prostate cancer in several genetically engineered mice although it was not examined in the normal mice. To investigate whether HFD-induced obesity can affect the development and progression of cancer in the prostate of normal mice, alterations in the weight and histological structure of the prostate as well as the expression of cancer-related proteins were analyzed in obese C57BL/6N mice fed with 60% HFD for 16 weeks. First, HFD-induced obesity, including an increase in organ weight, body weight, fat accumulation, and serum lipid profile, was successfully induced in C57BL/6N mice after HFD treatment. The total weight of the prostate significantly increased HFD-induced obesity in the model mice compared with the control group. Among the four lobes of the prostate, the weight of the ventral prostate (VP) and anterior prostate (AP) were higher in HFD-induced obesity model mice than in the control group, although the weights of the lateral prostate (DLP) and seminal vesicle (SV) were constantly maintained. In addition, the incidences of hyperplasia and non-hodgkin's lymphoma (NHL) in the histological structure were remarkably increased in HFD-induced obesity model mice, while the epithelial thickness was higher in the same group. A significant increase in the phosphorylation levels of key proteins in the AKT (protein kinase B) signaling pathway was detected in HFD-induced obesity model mice. Therefore, these results suggest that HFD-induced obesity can promote hyperplasia and NHL in the prostates of C57BL/6N mice through the activation of the AKT signaling pathway.

Quality and Fruit Productivity of the Second Truss Blooming Seedlings Depending on Concentration of Nutrient Solution in Cherry Tomato (양액 농도에 따른 방울토마토 2화방 개화묘의 소질 및 과실 생산성)

  • Lee, Mun Haeng
    • Journal of Bio-Environment Control
    • /
    • v.31 no.3
    • /
    • pp.230-236
    • /
    • 2022
  • This study was carried out to produce two-flowered seedlings, harvest them early in a greenhouse, and extend the harvest period. This study was carried out to effectively produce the second truss blooming seedlings to harvest tomatoes early and extend the harvest period. For production of the second truss blooming seedlings (one stem), the nutrient solution EC was supplied at 1.5, 2.0, 2.5 dS·m-1, and dynamic management (3.0 → 3.5 → 4.5 dS·m-1). The seedling period was 60 days, which was 20-40 days longer than conventional seedlings, and 10 days longer than the first truss blooming seedlings (cube seedlings). The plant height was 78 and 77 cm in EC 2.5 dS·m-1 and dynamic management respectively, which was shorter than EC 1.5 dS·m-1 with 88 cm. As for the EC in the cube before formulation, dynamic management had the highest EC 5.5 dS·m-1, and the cube supplied with EC 1.5 dS·m-1 had the lowest. The production yield by treatment did not a difference among in the second truss blooming seedlings, but the first truss blooming seedlings showed lower productivity than second truss blooming seedlings. The second truss blooming seedling were harvested 35 days after planting on June 4, the first harvest date, and the first truss blooming were harvested in 42 days on June 11th. There was no difference in plant height and root growth due to bending at frequency planting. In the study on the production of the second truss blooming seedlings (two stem), the nutrient solution EC was supplied under 2.0, 2.5, 3.0 dS·m-1, and dynamic management (3.0 → 3.5 → 4.5 dS·m-1). The seedling period was 90 days, which was 40-50 days longer than conventional seedlings and 10 days longer than the first truss blooming seedlings (cube seedlings). Plant height was 80 and 81 cm in EC 2.0 dS·m-1 and 2.5 dS·m-1 respectively, but was the shortest at 73 cm in dynamic management. EC in the medium increased as the seeding period increased in all treatments. The dynamic management was the highest with EC 5.1 dS·m-1. There was no difference in yield among EC treatments in the second truss blooming seedlings, which had a longer seeding period of about 10 days, produced 15% more than the first truss blooming seedlings. In order to shorten the plant height of the second truss blooming seedlings, it is judged that the most efficient method is increasing the concentration of nutrient solution.

Comparative Study of Seed and Straw Productivity of Italian Ryegrass(Lolium multiflorum Lam.) 'GreenCall' according to Inter-Row Spacing in the Southern Region (남부 지역에서 파종간격에 따른 이탈리안 라이그라스(Lolium multiflorum Lam.) '그린콜' 품종의 종자 및 짚 생산성 비교)

  • Li, Yan Fen;Wang, Li Li;Yu, Young Sang;Jeong, Eun Chan;Ahmadi, Farhad;Li, Sang Hoon;Kim, Jong Geun
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.42 no.2
    • /
    • pp.89-95
    • /
    • 2022
  • This experiment was conducted to investigate the change in the productivity of Italian ryegrass seeds according to the inter-row spacing in the southern region of the Korean Peninsula. Italian ryegrass (Lolium multiflorum Lam.) 'Green Call' variety was sown in Jinju, Gyeongnam in the fall of 2020 with three inter-row spacings (20, 30 and 40 cm). The experiment was arranged a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the first heading stage. There was no difference among treatments with an average of April 27th in heading stage. Plant height was significantly longer at 30 cm seeding interval and the shortest in 20 cm treatment. The length of the spike was the longest in the 40 cm seeding interval, and the number of seeds per spike was the highest in the 20cm seeding interval, but there was no significant difference among treatments. The seed yield was the highest at the 20 cm sowing interval (2,180 kg/ha), and decreased as the spacing increased. The dry matter content of seeds and straw was found to be 44.90% and 45.51% on average, and there was no significant difference among treatments. The amount of remaining straw after harvesting was found to be 7,506 kg/ha on average on DM basis, and was high at the 20 cm seeding interval. In view of the above results, it was found that it is most advantageous to sow at intervals of 20 cm when producing Italian ryegrass seeds through autumn sowing in the southern region.

Clinical Results of Lateral-Posterior Internal Fixation for the Treatment of Scapular Body Fractures (견갑골 체부 골절에서 외측 후방 금속판 고정술의 치료 결과)

  • Lee, Yoon-Min;Yeo, Joo-Dong;Song, Seok-Whan
    • Journal of the Korean Orthopaedic Association
    • /
    • v.55 no.1
    • /
    • pp.46-53
    • /
    • 2020
  • Purpose: Scapular body fractures have generally been treated with non-surgical methods. This study reports the clinical and radiological outcomes after lateral-posterior internal fixation for treating displaced scapular body fractures. Materials and Methods: From March 2007 to May 2017, out of 40 patients who underwent internal fixation for scapular fractures, 13 cases of lateral plate fixation of a scapular body fracture were reviewed retrospectively. Preoperative and postoperative displacement, angulation and glenopolar angle (GPA) were measured. The range of shoulder motion, visual analogue scale (VAS), and disabilities of the arm, shoulder, and hand (DASH), and Constant score were assessed at the last follow-up. Results: The mean follow-up period was 17.7 months (range, 6-45 months). The mean preoperative GPA was 23.3°±3.96° (range, 17.8°-28.1°) and the postoperative GPA was 31.1°±4.75° (range, 22.5°-40.1°). Injury to the suprascapular nerve, nonunion, fracture redisplacement, metallic failure, or infection did not occur. At the last follow-up, the mean range of motion was 150.5°±19.3° in forward flexion, 146.6°±2.34° in lateral abduction, 66.6°±19.1° in external rotation, and 61.6°±18.9° in internal rotation. The VAS, DASH, and Constant scores were 1.7±1.3, 6.2±2.4, and 86±7.9 points, respectively. Conclusion: A scapular body fracture with severe displacement, angulation and marked decreased GPA can be stabilized by lateralposterior plate fixation using the appropriate surgical technique with good functional and radiological results.

Application of Environmental Friendly Bio-adsorbent based on a Plant Root for Copper Recovery Compared to the Synthetic Resin (구리 회수를 위한 식물뿌리 기반 친환경 바이오 흡착제의 적용 - 합성수지와의 비교)

  • Bawkar, Shilpa K.;Jha, Manis K.;Choubey, Pankaj K.;Parween, Rukshana;Panda, Rekha;Singh, Pramod K.;Lee, Jae-chun
    • Resources Recycling
    • /
    • v.31 no.4
    • /
    • pp.56-65
    • /
    • 2022
  • Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

Quantitative Assessment of Coronary Artery Diameter in Patients with Atrial Fibrillation and Normal Sinus Rhythm (심방세동 환자와 정상 심전도 환자의 관상동맥 직경 정량적 평가)

  • Seo, Young-Hyun
    • Journal of the Korean Society of Radiology
    • /
    • v.16 no.5
    • /
    • pp.567-574
    • /
    • 2022
  • Coronary artery disease (CAD) and atrial fibrillation (AF) are known to share many risk factors. In particular, in the case of acute coronary syndrome, it may be difficult to clearly determine the diameter of the vessel due to complete occlusion of the vessel and thrombus. Thus, the relationship between the diameter of the coronary arteries was evaluated to be used as a reference data before the treatment of coronary arteries and drug selection in patients with AF. From January 2020 to August 2022, images of coronary angiography (CAG) with AF and normal sinus rhythm (NSR) on electrocardiography were target. In both subjects, images of normal coronary artery without lesions as a result of CAG were used. For all vessels, the diameters of the vessels were measured by dividing them into proximal, middle, and distal parts, and the measured diameters were divided by the average for evaluation. As a result of analyzing the left anterior descending artery diameter, the vessel diameter of the AF patient was 2.24±0.26 mm, which was smaller than that of the NSR patient, 2.86±0.38 mm, and was statistically significant. (p<0.001) As a result of analyzing the left circumflex artery diameter, the vessel diameter of the AF patient was 2.34±0.28 mm, which was smaller than the vessel diameter of the NSR patient, 2.87±0.29 mm, and was statistically significant. (p<0.001) As a result of analyzing the diameter of the right coronary artery, the vessel diameter of the AF patient was 2.68±0.5 mm, which was smaller than the vessel diameter of the NSR patient, 3.35±0.4 mm, and was statistically significant. (p<0.001) Considering that the coronary artery size of AF patients is significantly smaller than the coronary vessel size of NSR patients, it is considered as a useful study to be used as a reference for evaluating coronary artery diameter when the arrhythmia is AF. In particular, it is considered to be a study that can be helpful in diagnosing lesions, using drugs before and after surgery, and choosing to use auxiliary devices such as intravascular ultrasound.

A Study on Synthesis of Ca and Mg Compounds from Dolomite with Salt Additional React (MgCl2·6H2O) (염 첨가 반응(MgCl2·6H2O)을 이용하여 백운석으로부터 Ca 화합물과 Mg 화합물 합성에 관한 연구)

  • Hwang, Dae Ju;Yu, Young Hwan;Cho, Kye Hong;Lee, Jong Dae
    • Korean Chemical Engineering Research
    • /
    • v.59 no.3
    • /
    • pp.399-409
    • /
    • 2021
  • In order to utilize dolomite as a calcium/magnesium compound material, it was prepared highly reactive calcined dolomite(CaO·MgO) using a microwave kiln (950 ℃, 60 min). The experiment was performed according to the standard of the hydration test (ASTM C 110) and hydration reactivity was analyzed as medium reactivity (max 74.1 ℃, 5 min). Experiments were performed with calcined dolomite and salt (MgCl2·6H2O) (a) 1:1, (b) 1:1.5, and (c) 1:2 wt% based on the hydration reaction of calcined dolomite. The result of X-ray diffraction analysis confirmed that MgO of calcined dolomite increased to Mg(OH)2 as the salt addition ratio increased. After the separating reaction, calcium was stirred at 80 ℃, 24 hr that produced CaCl2 of white crystal. XRD results, it was confirmed calcium chloride hydrate (CaCl2·(H2O)x) and CaO of calcined dolomite and salt additional reaction was separated into CaCl2. And it was synthesized with Ca(OH)2 99 wt% by NaOH adding reaction to the CaCl2 solution, and the synthesized Ca(OH)2 was manufactured CaO through the heat treatment process. In order to prepare calcium carbonate, CaCO3 was synthesized by adding Na2CO3 to CaCl2 solution, and the shape was analyzed in cubic form with a purity of 99 wt%.

A Basis Study on the Optimal Design of the Integrated PM/NOx Reduction Device (일체형 PM/NOx 동시저감장치의 최적 설계에 대한 기초 연구)

  • Choe, Su-Jeong;Pham, Van Chien;Lee, Won-Ju;Kim, Jun-Soo;Kim, Jeong-Kuk;Park, Hoyong;Lim, In Gweon;Choi, Jae-Hyuk
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.28 no.6
    • /
    • pp.1092-1099
    • /
    • 2022
  • Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

Effects of Different Natural Extracts and Plant Growth Regulators on Plant Regeneration and Callus Induction from Pseudobulbs Explants through in vitro Seed Germination of Endangered Orchid Bulbophyllum auricomum Lindl. (멸종 위기에 처한 Bulbophyllum auricomum Lindl. orchid의 시험관 내 종자 발아를 통한 구근 절편체의 식물 재생 및 캘러스 유도에 대한 천연 추출물 및 식물 성장 조절제(PGR)의 효과)

  • Aung, Win Theingi;Bang, Keuk Soo;Yoon, Seo A;Ko, Baul;Bae, Jong Hyang
    • Journal of Bio-Environment Control
    • /
    • v.31 no.2
    • /
    • pp.133-141
    • /
    • 2022
  • Bulbophyllum auricomum Lindl. is a rare orchid and has flowers with an attractive fragrance. The present study investigated the tissue culture method for micropropagation. Capsules derived from artificial self-pollination were obtained for the best seed germination in MS basal medium. Plant growth regulators (1.0 mg·L-1 of BAP and 2.0 mg·L-1 of NAA) were affected by callus induction from subcultured pseudobulb explants. For the callus subculture, different natural plant extracts were tested in 11 treatment media. Among them, MS medium with 150 mL·L-1 of coconut water was generally effective in fresh weight (1.75 ± 0.08) and (3.01 ± 0.20) of callus proliferation and PLBs induction at 1 and 2 months, respectively, followed by an MS combination of 30 g·L-1 of banana and 20 g·L-1 of potato extract. The results of a comparative study of different MS mediums containing plant growth regulators with a natural extract combination and MS medium supplemented with natural extract only showed that MS medium supplemented with a combination of natural extracts (150 mL·L-1 of coconut water) and plant growth regulators (2.0 mg·L-1 of BAP and 1.0 mg·L-1 of NAA) obtained the highest shoot regeneration (3.37 ± 0.17) and (6.41 ± 0.68) after 1 month and 2 months of culturing, respectively.