• 대한한방내과학회지
• /
• 제41권5호
• /
• pp.745-753
• /
• 2020

Background: A number of studies have identified the effect of Korean medicine treatment for oculomotor nerve palsy, but few have reported treatment of subarachnoid hemorrhage. This paper reports two cases of oculomotor nerve palsy with ptosis and limitation of eye movement after subarachnoid hemorrhage whose conditions were improved by Korean medicine treatment. Methods: Two patients with ptosis and limitation of eye movement after subarachnoid hemorrhage were treated with Korean medicine, including acupuncture, electroacupuncture, herbal medicine, cupping, moxibustion, and pharmacoacupuncture. Clinical symptoms were measured as the distance of the interpalpebral fissure and eyeball movement (adduction, abduction). Results: After treatment, their clinical symptoms showed improvement. Conclusion: Korean medicine treatment, including pharmacoacupuncture and electroacupuncture, could be adopted as a treatment method for oculomotor nerve palsy after subarachnoid hemorrhage.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.191-194
• /
• 2010

Treatments of severely incurved toenails cause anatomical changes and cosmetic problems, even though they provide adequate symptom relief. Incurved toenail patients treated with a K-D$^{(R)}$ (S&C Biotech, Seoul, South Korea) the new device for correcting curved nail deformity were investigated retrospectively. This study surveyed 12 patients(18 cases) who had been treated for severe ingrown toenails using K-D$^{(R)}$ from May 2008 to March 2009, and examined their subjective satisfaction before and after the treatment. The average age of the participants was 39 (ranging from 27 to 52), and 8 of them were male and 4 female. The treatment was applied after the patients were given a thorough explanation about the tool and the treatment, and questionnaire surveys were conducted before the treatment and after 3 months on the average from the treatment. In the survey, the respondents were asked about pain, restriction on activities, and the selection of shoes. For each item, symptoms with a given point were presented, and the respondents' scores were compared between the surveys before and after the treatment. According to the results of the questionnaire survey, pain increased from 14 out of 40 before the treatment to 39 after, activity restriction increased from 11 to 30, and shoe selection increased from 20 to 30. The average total score increased from 45 to 98, and this suggests a considerable enhancement in the patients' subjective satisfaction. The average period of the application of K-D$^{(R)}$ was $20.3{\pm}9.4$ days, and in all the cases, ingrown toenails were corrected within three weeks.

• 한국재료학회지
• /
• 제20권5호
• /
• pp.278-288
• /
• 2010

High Pressure High Temperature (HPHT) treatment can significantly change the color of diamonds. We studied the variation of the optical properties according to the nitrogen arrangement in natural brown diamonds of various types (type IaAB, type IaB, type IaA > B, type IaA < B, IaA = B) after HPHT treatment. The diamonds with different arrangements of nitrogen were annealed at temperatures in the range $1700-1800^{\circ}C$ under a stabilizing pressure of 5 GPa. HPHT treated samples were analyzed using UV-Vis-NIR, FT-IR, and PL spectroscopy. The absorption and luminescence spectra were measured to compare the variations of nitrogen arrangement in the natural brown diamonds before and after HPHT treatment. After HPHT treatment, the brown coloration in all types of diamonds was reduced and a decrease in the peaks related to the A-aggregate of nitrogen was more predominant than the B-aggregate. Furthermore, the peaks related to N3 (415.4 nm), H4 (496.4 nm), and platelet decreased and the peaks related to H3 (503.2 nm) and G-band increased after HPHT treatment. In conclusion, spectroscopic analysis of natural brown diamonds after HPHT treatment showed that a yellow color was produced by absorption in the H3 centers and a green color was generated by interaction between absorptions of the H3 and H2 centers.

• 대한한의학회지
• /
• 제42권2호
• /
• pp.107-119
• /
• 2021

Objectives: This study was aimed to report changes in clinical symptoms and signs after treatment with Korean medicine in patients who suffered from calf edema due to deep vein thrombosis (DVT). Methods: A 46-year-old male patient, who discharged home after receiving standardized treatment for acute DVT in the right leg, suffered pain and heat sense due to edema of the affected calf. Oral administration of herbal medicine (Gyejibongnyeong-hwan 4 g, twice daily) and acupuncture therapy were given to him for 6 weeks. The change in chief complaints, Villalta score, the right and left side difference of the circumference and the skin surface temperature of both calves, and blood level of D-dimer were observed before and after treatment. Results: The patient's chief complaints began to significantly improve from 2 weeks after treatment, and disappeared completely within 4 weeks. At the end of the treatment, a substantial decrease in the difference between the right and left calves in the circumference and skin surface temperature was observed. This effect was maintained even at the time of follow-up 3 months after the end of treatment, and the patient completely recovered indoor and outdoor life to the level before onset. Conclusions: This case suggests that Korean medicine treatment, including Gyejibongnyeong-hwan administration and acupuncture therapy, can be a viable option to improve edema and related clinical problems in the affected limbs due to DVT.

• Journal of Plant Biotechnology
• /
• 제1권2호
• /
• pp.117-121
• /
• 1999

Effects of jasmonic acid treatment, UV-B and white light treatment on the anthocyanin biosynthesis and cell growth were investigated using the cell suspension culture system of grape (Vitis vinifera L.). Cell growth was not affected by white light irradiation, while it was remarkably suppressed by UV-B irradiation from 8 to 32 h. Anthocyanin accumulation dramatically increased after 16 h from irradiation of UV-B. Simultaneous treatment of jasmonic acid and UV-B increased anthocyanin accumulation by 10-fold. The cell division was restored when anthocyanin was abundantly accumulated after 32 h from UV-B irradiation. Optimum concentration of jasmonic acid was found to be 5 uM for maximum accumulation of anthocyanin. Application of jasmonic acid to grape suspension cells rapidly induced the expression of CHS gene after 2 h from treatment and showed maximum level at 32 h. Simultaneous treatment of jasmonic acid and light also induced CHS gene expression after 2 h, but the maximum level of CHS transcript was observed at 16 h with white light and 8 h with UV-B exposure. The synergistical effects could be explained by the defense mechanism that UV irradiation is mediated in part by alterations in JA and its signaling pathway.

• 대한수의학회지
• /
• 제29권2호
• /
• pp.129-134
• /
• 1989

Fecal samples were taken from 402 cows in Posung, Chonnam where was designated as a place for Korean native cattle breeding. Prevalence of internal parasitisms were determined by the fecal examinations using the floatation and sedimentation procedures. 62.9% of the cows were found as positive cases with excretion of the eggs of Fasciola hepatica in the fecal specimens. Of those infected with F hepatica 97 cows free of other pathogenic intestinal parasites were chosen for albendazole treatment. Albendazole tablets(10mg/kg) were administered to the cows twice at the interval of 4 weeks. Blood samples were collected via jugular vein prior to the first treatment, four weeks after the first treatment and four weeks after the second treatment, respectively. At the same time fecal samples were collected for parasitological examinations by sedimentation methods. The mean pretreatment count was 44 fluke eggs per gram of feces, which compared with 27 epg and 17 epg four weeks after the first and second treatment, respectively. Most of the hematological and biochemical values fluctuated within the normal ranges during the experiment. Eosinophil counts were high initially, decreased after the first treatment and thereafter remained steady. The opposite was the case with aspartate and alanine aminotransferases.

• 대한통합의학회지
• /
• 제3권3호
• /
• pp.25-33
• /
• 2015

Purpose : The purpose of this study was to find out objective and scientific grounds on the effect of Spiral Balanced Taping(SBT) by examining physiological change according to pain reduction and understanding the relationship physiological change and pain. Method : 32 female students who was from 20 to 25 years old($22.06{\pm}1.13$). Regarding the range of pain, each 16 female students ranged in the right and the left. The subjects selected the most comfortable method of six taping methods related with trapezius. They were examined with four measurement methods(Visual Analogue Scale : VAS, Algometer, Digital Infrared Thermograph Imaging(DITI), and Cervical Range of motion : CROM) and measured before treatment, right after treatment, 30 minutes later after treatment and 60 minutes later after treatment. Result : According to the result of Repeated measure ANOVA, there was a significant difference with all four methods before and after treatment. In addition there was a significant difference in proportion to time. As a result of stepwise regression, VAS was the highest with Digital Infrared Thermograph Imaging(r2=0.136) and pressure pain threshold was the highest in the range of cervical motion. Conclusion : There was the effect of SBT to all four measurement method and it was effective with measuring VAS and DITI, or Algometer and CROM together.

• 마이크로전자및패키징학회지
• /
• 제17권2호
• /
• pp.11-20
• /
• 2010

The effects of heat treatment on matte pure tin-plated Cu leadframes at high temperature and humidity conditions were investigated. After 1800 hrs of storage at $55^{\circ}C/85%$ RH, approximately 14.5 ${\mu}m$ long striation-shaped whiskers were observed on the surface of the without postbake treatment (WOPB) samples, while no whiskers were found in with postbake treatment (WPB) samples. The preferred orientations of Sn grains in WOPB and WPB sample did not change after the postbake treatment at $125^{\circ}C$ for 1 hr. However, both changed from (112) to (321) and (101), respectively, after 1800 hrs of storage at $55^{\circ}C/85%$ RH. The tensile stress of 8 MPa generated in as-plated sample was changed to a compression stress of 17 MPa after 2 days in room temperature storage. Due to the grain growth during postbake treatment, the WPB samples have more regular grains than the WOPB samples. In the as-plated sample, 0.32 ${\mu}m$ thickness of planar intermetallic compound (IMC) was observed. The IMCs in the WOPB and WPB samples had two distinct layers with large grains of $Cu_6Sn_5$ and with small grains of ${\eta}-Cu_{6.26}Sn_5$.

• 대한한방내과학회지
• /
• 제39권2호
• /
• pp.217-223
• /
• 2018

In this study, five cases of post-stroke vision disorders are presented. The patients had no distinctive change in vision disorders before Korean medical treatment, which included herbal medicine, acupuncture, and electroacupuncture. After 11 to 28 days of Korean medical treatment, the patients experienced the first improvement of vision disorders after stroke. Also, patients who received Korean medical treatment after 30 days from onset, the duration in which the most improvement of post-stroke vision disorders occurs, progressed their vision disorders by the start of Korean medical treatment. Korean medical treatment might be effective in treating vision disorders after stroke.

• 연구논문집
• /
• 통권26호
• /
• pp.121-132
• /
• 1996

The carburising surface modification treatment of the die steel has been used for improving wear resistance and heat cycle strength of the die and preventing a pitting on the surface because the carbides are forming in the matrix during carburising. Generally, the hot forging die was used after quenching-tempering treatment or nitriding after quenching-tempering treatment. The nitriding after carburising on the surface of a hot die steel and a wear resistance die steels was suggested by SOUCHARD, JACQUOT. and BUVRON. This surface modification treatment improved the adhesive and abrasive wear resistance and friction coefficient. The process was introduced to the forging die of stainless steel, titanium alloy steel, alloy and medium carbon steel and the physical properties of the die after the treatment were improved. The surface hardening treatment of the nitriding, the carburising, the boriding, and TD process were used to improved the life time of the forging die. Also, the coating process of PVD, CVD and PCVD were used and the hard chromium plating was occasionally used. Therefore, this study analyzed the effects of the carburising time and the conditions of nitriding on STD61 steel. The case depth, the surface hardness, the forming carbide size and shape during overcarburising process on the die steel were also examined.