• The Journal of Korean Academy of Prosthodontics
• /
• 제51권2호
• /
• pp.107-112
• /
• 2013

Complications increases when crown height space is excessive and one should be careful of choosing type of fixed prosthesis in case crown height space is over 12 mm. In this condition, tooth seems to be longer, therefore, it is needed to use gingival shade in aesthetically important area for fixed prosthesis. In this case, fixed prosthesis which has inappropriate maintenance and hygiene could hold food, plaque, calculus, thus increase incidence of inflammation and infection. Moreover, it could lead to chronic inflammation and infection and in that case surgical improvement could be necessary. In present case report, gingival inflammation and swelling developed around prosthesis after having made it considering articulation and aesthetic view in patient who had excessive crown height space. Finding out that design of prosthesis is a factor to make it hard to maintain oral hygiene, a temporary prosthesis which has enough interproximal space and proper emergence profile was fabricated. After two months of observation, significant abnormal symptoms are not found and oral reconstruction is performed using fixed prosthesis with zircornia infrastructure and porcelain build-up based on convenient self hygiene design. Through serial treatment, inappropriate soft tissue response is not observed and satisfactory result in functional aspect comes out.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제4권3호
• /
• pp.84-95
• /
• 2001

This study was conducted to suggest the ecological restoration methods for the decomposed granite roadside cutslopes by Natural Topsoil Restoration Methods(NTRM). Four woody species, 3 shrub species, 4 native grasses, 8 wild flowers and 2 cool-season grasses were used. The experiment was conducted with the purpose of developing ecological restoration techniques by achieving following objectives for restoration by using native woody plants, shrubs, native plants and wild flowers; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Restoring naturalness to human-altered landscapes are important to protecting the worlds biodiversity. In this study, to restore or create an ecological community use as full a complement of native species as possible. Ecological restoration means returning a specific sites to its predisturbance condition. 2. Some species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. In this study, cool season grasses was used small amount than native plants and woody species, because and Indigofera pseudo-tintoria grows well. Tall fescue and perennial ryegrass shows quick germination, but they could not inhibit the other species growing relatively slow. Pinus thunbergii used at Gonam near the ocean was suppressed by the other plants, so it can be concluded that using container seedlings is effective than seeding. 4. Ailanthus altissima, Albizzia julibrissin, Rhus chinensis Lespedeza cyrtobotrya, and Indigofera pseudo-tinctoria were germinated. In wild flowers, Coreopsis lanceolata, Dianthus sinensis, Coreopsis tinctoria, and Lotus corniculatus var. japonicus grew well and show enough plant height which will not suppressed by shrub and woody plants. After one year, native grasses such as Arundinella hirta, Miscanthus sinensis var. purpurascens and Imperata cylindrica var. koenigii cover the slopes well. 5. 25 herbaceous plants such as Trifolium repens, Arthraxon hispidus, Barbarea orthocerae, Potentilla fragarioides, Lepidium apetalum, Chenopodium album var. centrorubrum, Glycine soja, Rubus crataegifolius and 4 woody species such as Lespedeza maximowiczii, Robinia pseudoacacia, Symplocos Chinensis, Quercus acutissma were invaded. 6. Ecological restoration works by Natural Topsoil Restoration Methods for revegetation of the decomposed granite roadside cutslopes were successfully accomplished. It prevents surface water erosion and shows diverse vegetation structure. It will be successful to restore decomposed granite cutslopes.

• The Korean Journal of Community Living Science
• /
• 제28권1호
• /
• pp.17-28
• /
• 2017

The purpose of this qualitative research was to examine the behavior patterns and activities related to the clothing of older women. A total of 31 older women were interviewed regarding indoor/outdoor wearing conditions, thermal sensation indoors, and their clothing perception related to health. The final outcomes were as follows. Firstly, interviewees viewed indoor temperature as neutral in the spring and fall. Many people felt cool or warm in the summer and warm or cold in the winter. Secondly, they controlled indoor temperature with an air conditioner and/or fan and by opening the window and/or wearing less clothing. In winter, most respondents used a heating system and wore more clothing. It seemed that the level of dependence on clothing was higher in winter. Thirdly, the number of garment layer indoors was similar among the four seasons, and many wore underwear. However, there were individual variations. Fourthly, interviewees tended to perceive clothing in relation to health. Textile materials appropriate to the season were firstly viewed as related to health, followed by climate adaptability, clothing pressure, UV protection, and aesthetic satisfaction. Fifthly, respondents showed positive attitudes towards health improvement by clothing even though they lacked information on it. From this research, older women showed positive the perception and attitudes regarding clothing from a health perspective. Since they lacked information, education is needed regarding the bases and ways to improve health through clothing behavior.

• The Journal of Korean Academy of Prosthodontics
• /
• 제50권3호
• /
• pp.198-203
• /
• 2012

Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제32권6A호
• /
• pp.355-367
• /
• 2012

Many of old aqueduct bridges located in rural areas are in need of repair and redesign. They still occupy some portion of countryside landscaping. However, most of them were designed to fulfill their basic functions of carrying waters, which has not contributed to the landscape positively. Moreover, it is not rational to treat each design case of aqueduct bridges individually because they are relatively small in size and arranged continuously over a long path. Therefore, it is better to provide a design guideline to repair or to redesign old aqueduct bridges as a whole considering both structural safety and landscape. The main objective is to develop a framework to repair and redesign of old aqueduct bridges for safety improvement and better landscape. Specifically this paper will address the development of possible design alternatives for repair and redesign The development of design alternatives for redesign will follow general principle of bridge aesthetics and be represented according to structural system, flume shape, pier height, pier shape in terms of design parameters while minor repair includes paintings and other ornamentations. And the developed design alternatives will be reviewed with its landscape as a background to check the visual compatibility within the community context. It is expected that the proposed guideline will be utilized to develop a maintenance plan to revitalize old aqueduct bridges to improve overall landscape of rural areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권12호
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제2권4호
• /
• pp.54-63
• /
• 1999

This study was conducted to suggest the ecological restoration and environmentally friendly revegetation technology for the rock-exposed cut-slopes by the Natural Topsoil Restoration Methods (NTRM) with the following restoration objectives; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of the disturbed slopes. On Nov. in 1995, the 5cm thick layer of artificial soil and 2cm thick layer of straw-mulching was attached at rock-exposed cut-slopes by NTRM without using anchor wire and anchor pin. The main results during four years surveying on the ground-coverage effect, plant growth, species diversity and importance values were summarized as follows. 1. Artificial soil attached at rock exposed cut-slopes was not eroded until recovered by tree and herbaceous vegetation in spite of not using anchor wire and anchor pin. Also it shows low soil hardiness and has almost the same amount of bacteria and fungi with in surrounding natural topsoil. 2. In 'combination for the woody vegetation', Lespedeza cyrtobotrya, Albizzia julibrissin, Rhus chinensis, Indigofera pseudo-tinctoria occupied upper layer vegetation. Since three years after seeding, Indigofera pseudo-tinctoria had overwhelmed the other woody plants and cool season foreign grasses, Erigeron canadensis, Taraxacum mongolicum, Commelina communis, Arundinella hirta (Thunberg) and Oenothera erythrosepala grows at lower part of the vegetation, 3. The heights of the Rhus chinensis grows 1.8m, Indigofera pseudo-tinctoria 2.0m, so it seems that the objectives of woody vegetation with native plants could be accomplished. 4. After 4 years later after seeding in 'combination for the herbaceous vegetation', the most dominant plant was Indigofera pseudo-tinctoria, the next was in order of cool-season grasses, Taraxacum mongolicum, Erigeron canadensis, lxeris dentata (Thunberg), Oenothera erythrosepala, Arundinella hirta (Thunberg). The diversity index in 'combination for woody vegetation' was higher than that in 'combination for the herbaceous vegetation'. The tendency of the intrusion of secondary succession plants was more effective in 'combination for the herbaceous vegetation' than in 'combination for the woody vegetation'.

• Journal of Science of Art and Design
• /
• 제8권
• /
• pp.5-43
• /
• 2005

This study aimed to suggest a resolution through a research on actual condition of appreciation class among art classes in elementary school. For this object, this study is about the need and problem of appreciation through concert of art appreciation and educational meaning. And this study is research, based on 200 current teachers to teach the art education of appreciation in Seoul. In the case of student research, this study show the current appreciation education focusing on 200 students in Seoul. The teachers has been seeing the importance of the appreciation education, but that education has been performing in the poor environment without aids and appreciation materials. And they thought that the most effective way to teach the appreciation of art is the on-site education such as the invitation of art-gallery or museum. The Change of realization about art, together with improvement of realistic situation, is important. But more important problem is the role and the realization of teacher who teach art directly. If the teacher's viewpoint to teach directly education of appreciation is examined, there are following problems First, it lacks realization about the importance of appreciation education. Teachers who teach a student have been taken functional art education mainly and this trend has been spread in the whole of society, therefore, the importance about the teaching of appreciation is negligent and is handled indifferently. Also, Teachers do not offer opportunity to obtain professional information of art appreciation map to overemphasize the study of practical teaching research. Second, elementary schools teacher is, for the most part, occasion that homeroom teacher teaches all object classes, and complete charge teacher is selected only some. Therefore, teacher in charge who play most a lot of subjects is difficult to recognize the importance of art teaching appreciation subject or class. There must have been a research about the educational preventive measures as suitable support, reorganization of at time and experts in superior office educational institution. Trough this study, I could know that front-line teacher should be specialized and more complete charge teacher should be needed urgently. Finally, the teachers must break the custom of the art appreciation and develop various art appreciation method. And the teachers have to lead the students to be interested art appreciation. That's what cultivate the students' aesthetic feeling and genius.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제34권2호
• /
• pp.303-317
• /
• 2010

This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.

• Archives of design research
• /
• 제2권1호
• /
• pp.13-41
• /
• 1989

The raw materials for plant-stalk-folkcrafts are cultivated in the whole country. Most Korean farmers, to increase their income, have produced mats and containers with various plants as a side line from very long ago. At first, they began from the instruments of life and then made folkart and at last get to manu\ulcornerfacturing of industrial folk craft. The folkcrafts, made of plant-stalk, which could nor conform to changing society, are partly declined and partly handed down as the traditions. The social change today, however, makes living conditions more speedy and multisided, accordingly the characteristics of demand also become in\ulcornerdividual and various. While the demend is various like this, suppliers cannot answer demendants' requirements, and consequently, the demand and profit cannot be increased. According to this, the purpose of this study is set up to give an answer to the situation that is at the traditional standstill, through an examination of the motives. I. The crafts of plant-stalk are made only in an organized relationship between agriculture, industry and art as it is compounded art of gathering raw material, manufacturing, producing, improv\ulcornering design and production conditions. It may be possible that a farmer gathers material and weaves it manually but in others, it is im\ulcornerpossible to refine, bleach and dye because the process requires a professional industrial treatment. It is impossible to make art works to a farmer as every farner does not always have aesthetic sense. Though a farmer or producer has these all abilities, it is not desirable to him from economical view. 2. The development or improvement is essential in many sides but the most important thing seems to he in design. According to reports, it is, howevt!r, fact that the crafts improved in design of existing works have more expanded the sales than newly developed works. Therefore, ir appears advisable to improve designs of existing things positively as they have merit of occupying a position already, but on the other hand, new crafts have to be also developed and the producer should grasp the proper time. 3. Building up an industrial complex to improve design with collecting the producing districts for this works scattered allover the country is very desirable for speedy communication, intensive educa\ulcorner tion or training, and effective guidance. 4. In producing for export abroad, before everything, must know the life environment, custom! and manners, main thought of the country, and then produce according to these. S. The crafts of plant-stalk are the fIrst industry in present but in the futher it should change intc second or third industry. 6. A synethetic organization for supporting side line should be established for effectiveness, and experts have to be secured and also the educational-industrial complex and activation of study should be preceded.