• Journal of Korean Society for Quality Management
• /
• v.28 no.2
• /
• pp.70-88
• /
• 2000

Short runs where it is neither possible nor practical to obtain sufficient subgroups to estimate accurately the control limit are common in modem business environments. In this study, the standardized control chart, Hillier's exact method, Q chart, EWMA(Exponentially Weighted Moving Average) chart for Q statistics and EWMA chart for mean and absolute deviation among many SPC(Statistical Process Control) techniques for short runs have been reviewed and advantages and disadvantages of these techniques are discussed. The simulation experiments to compare performances of these variable charts for process mean and variations are conducted for combination of subgroup size, scale and timing of shifts of process mean an/or standard deviation. Based upon simulation results, some guidelines for practitioners to choose short run SPC techniques are recommended.

• Journal of Welding and Joining
• /
• v.19 no.4
• /
• pp.379-383
• /
• 2001

Resistance spot welding has been widely used in the sheet metal joining processes because of low cost, high productivity and convenience. Recently, automobile and aerospace industries are trying to replace partly steel sheets with aluminum alloy sheets. But in the case of dissimilar materials, to apply resistance spot welding has been known to be very difficult owing to the effect of melting temperature. On this study, an effort was made to apply spot welding of dissimilar sheet metals, 2024 aluminum alloy and zinc coated steel sheet, evaluate the spot weld quality with tensile-shear strength test and nondestructive evaluation technique, C-scan image methodology. In this study results, as the current below 11 kA, melting of materials is not achieved well. Also as the current exceeds to 13.5 kA, the more spatters happen at welded zone and tensile-shear strength lowered. So, the feasibility of C-scan image technique proposed in the study is found to be suitable evaluation method for resistance spot weldability.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.1E
• /
• pp.70-75
• /
• 1998

The analysis of dynamic responses are carried out on several anisotropic systems due to buried pulsating line sources. These include infinite, semi-infinite spaces. The media possess orthotropic or higher symmetry. The load is in the from of a normal stress acting with parallel to symmetry axis on the plane of symmetry within the materials. The results are first derived for infinite media. Subsequently the results for semi-infinite are derived by using superposition of the solution in the infinite medium together with a scattered solution from the boundaries. The sum of both solutions has to satisfy stress free boundary conditions, thereby leading to the complete solutions. The solutions are simplified to the systems possessing of higher symmetry, such as orthotropic, transversely isotropic, cubic, and isotropic symmetry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.306-309
• /
• 2007

Recently, magnesium alloys have been widely used in automotive, aerospace and electronic industries with the advantages such as lightweightness, high specific strength and stiffness. However, magnesium alloy has quite low formability at room temperature due to its hexagonal close-packed crystal structure. Warm deep drawing is one of the forming technologies to improve the formability of magnesium alloy sheet and the lubrication condition is an important process parameter in that. In this study, the drawing tests of AZ31 alloy sheet at elevated temperature for various kinds of lubricant were carried out and the effects of lubrication conditions on drawbility were investigated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.230-233
• /
• 2007

Due to their low density, high specific strength and electromagnetic interference shielding, magnesium alloy sheets are used increasingly more often in automotive, aerospace, and electronics industries. However, magnesium ally sheets should be usually formed at elevated temperature because of their poor formability at room temperature. For the use of magnesium alloy sheets for an industrial, their mechanical properties at elevated temperature and appropriate forming process conditions have to be developed. In this study, the warm deep drawing process of AZ31 sheets is studied numerically by non-isothermal simulation. The difference between the isothermal simulation results and the non-isothermal simulation results and the progress of warm forming are discussed.

• Journal of Welding and Joining
• /
• v.34 no.2
• /
• pp.30-35
• /
• 2016

Last few decades have seen a rapid increase in the fabrication and characterization of Al alloys for automobiles, heat exchangers and aerospace industries. Aluminium alloys are popular because of their high specific strength, light weight, excellent wear and high oxidation resistance. The development of aluminium alloys in these applications makes their study and research of utmost importance. Brazing is applied to the aluminium alloys for joining various aluminium parts together in most of the industrial applications. Various parameters affect the joining process of these aluminium alloys. In this article, various types of processing parameters have been discussed, and special attention has been given to the category of aluminium brazing alloys. The article reviews on the various parameters that affect the brazing property in various scientific and technological applications.

• The Korean Journal of Applied Statistics
• /
• v.22 no.5
• /
• pp.1007-1017
• /
• 2009

Forecasting for air demand such as passengers and freight has been one of the main interests for air industries. This research has mainly focus on the comparison the performance between the univariate seasonal ARIMA models and the multivariate time series models. In this paper, we used real data to predict demand on international passenger and freight. And multivariate time series models are better than the univariate models based on the accuracy criteria.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.203-203
• /
• 2013

Low pressure plasmas play a key role in many areas including electronic, aerospace, automotive, biomedical, and toxic waste management industries, and the advantages of the plasma are well known the processing procedure is established. However, the insight behavior of the discharges remains a mystery, even though a simple geometry as capacitive discharges. In this work, we measured RF power dissipation in capacitively coupled plasma (CCP) at various experiment conditions with potential probe and RF current probe. Through the results, we will have a clearer view of the inner nature of the CCP.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1043-1044
• /
• 2006

Compositional dependence of corrosion behavior of rapidly solidified Mg-rich Mg-Zn-Y alloys in NaCl aqueous solution has been investigated. Mg-Zn-Y ternary alloys containing small amounts of Zn exhibited low corrosion rate, although the $Mg_{98}Y_2$ (at. %) binary alloy showed severe corrosion with violet evolution of hydrogen. The alloy with highest corrosion-resistance was $Mg_{97.25}Zn_{0.75_Y_2$, its corrosion rate was about 1 mm year-1 in 0.17 M (1.0 wt. %) NaCl solution. $Mg_{97.25}Zn_{0.75}Y_2$ alloy exhibited passive region in anodic polarization curves when immersed in NaCl solution. Rapidly solidification and small amount of Zn addition may bring about an increase in electrochemical homogeneity of Mg-Zn-Y alloys, resulting in enhancement of corrosion resistance.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2383-2385
• /
• 2000

It is proposed a new algorithm for a neural network adaptive tracking control scheme to improve performance in this paper. In supervisory control scheme, the upper and lower bound of the parameters are directly estimated by using RBF neural network without their information, and the weighting parameters of the control input are adjusted on-line by adaptation laws. As a result, the proposed algorithm assured that the output errors go to zero without relation to existing minimum approximation errors and disturbances. The effectiveness of the proposed algorithm is demonstrated through the simulation of one-link rigid robotics manipulator.