• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.69-74
• /
• 2012

This study describes how successfully a conventional flame aerosol synthesis was used to continuously synthesize Pt-Ru catalysts supported by carbon agglomerates. Nearly spherical catalysts produced in the flame were mainly composed of metallic Pt and Ru with the molar ratio of 1:1 and those sizes were controllable from ~1.5 nm to ~2.0 nm. Nevertheless, only Pt peaks were found from X-ray diffraction experiments, suggesting that amorphous-like Ru was well mixed in the crystalline Pt lattices. It was found from Cyclo-voltamograms and CO stripping experiments that the electrochemical properties of the catalysts are at least comparable to that of a conventional commercial sample.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.529-534
• /
• 1998

Agglomeration-free indium oxide particles were produced by ultrasonic pyrolysis of indium nitrate(3 hy-drate) solution. Th mean size of particles was increased from 3 $\mu\textrm{m}$ to 11$\mu\textrm{m}$ with increasing intial con-centrations of indium nitrate from 0.05mol% to 4.83 mol% When the input rate of indium nitrate solution was increased from 0.1 cm3/min to 0.8cm3/min the size of particles remained same and only the pro-duction rate of particles was increased. At 300$^{\circ}C$ the particles were white color with low crystallinity. But the color turned into yellow with increasing reaction temperature. The change of particle size was not ob-served with increasing temperatuer up to 700$^{\circ}C$ IR spectrum and TGA analysis confirmed that the purity of indium oxide was increased with temperature of reaction.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.71-74
• /
• 2006

High $J_c$ over 1 $MA/cm^2$ YBCO film has been successfully prepared using nitrate precursors by spray pyrolysis method. Aerosol drolpets generated using a concentric spray nozzle were directly sprayed on a $LaAlO_3$(100) single crystal substrate. The cation ratio of precursor solution was Y:Ba:Cu=1:2.65:1.35. The distance between nozzle and substrate was 15 cm. Deposition temperature was ranging from $750^{\circ}C\;to\;800^{\circ}C$. Deposition pressure was 100 Torr, and oxygen partial pressure was varied from 10 Torr to 50 Torr. The microstructure, phase formation, texture development and superconducting properties of deposited films were largely changed with oxygen partial pressure. Deposited films showed a texture with(001) planes parallel to substrate plane. High quality film was obtained when film was deposited at $760^{\circ}C$ with an oxygen partial pressure of 30 Torr. The critical current density($J_c$) of the YBCO film was 1.75 $MA/cm^2$ at 77 K and self-field.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.880-885
• /
• 2008

분무열분해 공정을 이용하여 규칙적인 메조기공을 가지는 실리카 분말을 제조하고 고표면적을 얻기 위한 합성조건을 최적화하였다. 주형제로 이용된 CTAB의 양과 액적들의 반응기 내에서 체류시간을 변화시켜주면서 입자를 제조하고 SEM, BET, SAXS, 그리고 DLS를 통해 분말특성을 조사하였다. 기체 유입속도를 고정하고 CTAB/TEOS 몰비를 0.05에서 0.30으로 변화시킴에 따라 비표면적은 200에서 $1,290m^2/g$으로 변화였다. CTAB/TEOS 몰비를 고정했을 때 입자의 비표면적은 기체의 유입속도에 따라 1,062에서 $1,305m^2/g$ 사이에서 변화되었다. 제조된 입자들의 BJH 탈착에 의한 평균 기공 크기는 $21{\sim}23{\AA}$를 가졌으며, CTAB/TEOS 몰비나 기체 유입속도에 크게 영향을 받지 않았다. 최대 표면적은 CTAB/TEOS 비를 0.2, 기체 유속을 20 l/min으로 했을 때 $1,305m^2/g$를 얻었다. 제조된 실리카 분말은 육방형구조의 규칙적인 기공에 기인한 $2{\theta}=2.6^{\circ}$ 강한 피크와 $2{\theta}=4.4$ 및 $5.1^{\circ}$ 약한 피크를 가지는 것을 SAXS 분석결과로 확인하였다. 제조된 실리카 분말은 구형의 형상을 가졌으며 $1.0{\mu}m$의 평균크기를 가졌다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.159-159
• /
• 2011

Among the semiconductor ternary compounds in the I-III-$VI_2$ series, $CulnS_2$ ($CulnSe_2$) are one of the promising materials for photovoltaic applications because of the suitability of their electrical and optical properties. The $CuInS_2$ thin film is one of I-III-$VI_2$ type semiconductors, which crystallizes in the chalcopyrite structure. Its direct band gap of 1.5 eV, high absorption coefficient and environmental viewpoint that $CuInS_2$ does not contain any toxic constituents make it suitable for terrestrial photovoltaic applications. A variety of techniques have been applied to deposit $CuInS_2$ thin films, such as single/double source evaporation, coevaporation, rf sputtering, chemical vapor deposition and chemical spray pyrolysis. This is the first report that $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) technique which is a novel and attractive method because thin films with high deposition rate can be grown at very low cost. In this study, $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) method which employs a nozzle expansion. The mixed fluid is expanded through the nozzle into the chamber evacuated in a lower pressure to deposit $CuInS_2$ films on Mo coated glass substrate. In this AJD system, the characteristics of $CuInS_2$ films are dependent on various deposition parameters, such as compositional ratio of precursor solution, flow rate of carrier gas, stagnation pressure, substrate temperature, nozzle shape, nozzle size and chamber pressure, etc. In this report, $CuInS_2$ thin films are deposited using the deposition parameters such as the compositional ratio of the precursor solution and the substrate temperature. The deposited $CuInS_2$ thin films will be analyzed in terms of deposition rate, crystal structure, and optical properties.

• 센서학회지
• /
• 제6권2호
• /
• pp.155-162
• /
• 1997

zinc acetate를 포함하는 용액으로부터 r-plane 사파이어 기판 위에 ZnO 막(膜)을 증착하였다. 초음파(超音波) 발생기(發生器)로 용액을 진동시켜 증기입자를 만든 후 이것을 고온 반응로(反應盧) 내에서 열분해(熱分解) 시켜 막(膜)을 증착하였다. 제조된 막(膜)의 결정성, 표면형태 및 조성을 XRD, SEM 및 AES로 각각 분석하였다. 기판온도가 막(膜)의 특성에 미치는 영향에 대해 조사하였다. 기판온도 $300^{\circ}C$에서 (110) 방향으로 강하게 성장된 막(膜)을 얻을 수 있었다. 구리의 첨가(添加)와 습식산화(濕式酸化)에 의해 막(膜)의 저항율을 $3{\times}10^{6}{\Omega}{\cdot}cm$이상으로 높일 수 있었다.