Particle and aerosol research (한국입자에어로졸학회지)

Korean Association for Particle and Aerosol Research (한국입자에어로졸학회)
권호 표지

Synthesis of Carbon-Supported Pt-Ru Catalysts using a Flame Spray Pyrolysis Method for Fuel Electrode of Low Temperature Fuel Cell

화염분무열분해 공정을 이용한 저온 연료전지 연료전극용 탄소담지 Pt-Ru 촉매의 제조

  • Lee, Hyun-Min (School of Mechanical Engineering, Pusan Clean Coal Center, RIMT, Pusan National University) ;
  • Lee, Dong-Geun (School of Mechanical Engineering, Pusan Clean Coal Center, RIMT, Pusan National University)
  • 이현민 (부산대학교 기계공학부 기계기술연구원) ;
  • 이동근 (부산대학교 기계공학부 기계기술연구원)
  • Published : 2012.06.30
⟨ Previous Next ⟩

Abstract

This study describes how successfully a conventional flame aerosol synthesis was used to continuously synthesize Pt-Ru catalysts supported by carbon agglomerates. Nearly spherical catalysts produced in the flame were mainly composed of metallic Pt and Ru with the molar ratio of 1:1 and those sizes were controllable from ~1.5 nm to ~2.0 nm. Nevertheless, only Pt peaks were found from X-ray diffraction experiments, suggesting that amorphous-like Ru was well mixed in the crystalline Pt lattices. It was found from Cyclo-voltamograms and CO stripping experiments that the electrochemical properties of the catalysts are at least comparable to that of a conventional commercial sample.

Keywords

References

  1. Amado, V.P., Frabcesc, C., Jose, A.G., Conchita, A., Rosa, M.R., Enric, B., Cabot, P.L. (2010) Int. Hydrogen. Energ., 35, 11591-11600. https://doi.org/10.1016/j.ijhydene.2010.03.104
  2. Antolini, E., Cardellini, F. (2001) J. Alloy. Compd., 315, 118-122. https://doi.org/10.1016/S0925-8388(00)01260-3
  3. Chakraborty, D., Bischoff, H., Chorkendorff, I., Johannessen, T. (2005) J. Electrochem. Soc., 152, A2357-A2363. https://doi.org/10.1149/1.2109547
  4. Chen, Y., Tang, Y., Liu, C., Xing, W., Lu, T. (2006) J. Power Sources, 161, 470-473. https://doi.org/10.1016/j.jpowsour.2006.03.082
  5. Chen, J., Jiang, C., Lu, H., Feng, L., Yang, X., Li, L., Wang, R. (2009) J. Nat. Gas. Chem., 18, 341-345. https://doi.org/10.1016/S1003-9953(08)60114-0
  6. Choi, I.D, Lee, H., Shim, Y., Lee, D. (2010) Lanmuir, 26, 11212-11216. https://doi.org/10.1021/la1005264
  7. He, Z., Liu, D., Zhou, H., Kuang, Y., Chen, J. (2004) Diam. Realt. Mater., 13, 1764-1770. https://doi.org/10.1016/j.diamond.2004.03.004
  8. Jiang, L., Sun, G., Zhao, X., Zhou, Z., Yan, S., Tang, S., Wang, G., Zhou, B., Xin, Z. (2005) Electrochim. Acta., 50, 2371-2376. https://doi.org/10.1016/j.electacta.2004.10.050
  9. Kim, H.T., Joh, H.I., Moon, S.H. (2010) J. Power Sources, 195, 1352-1358. https://doi.org/10.1016/j.jpowsour.2009.08.099
  10. Ra, Y., Lee, J., Kim, I., Bong, S., Kim, H. (2009) J. Power Sources, 187, 363-370. https://doi.org/10.1016/j.jpowsour.2008.10.135
  11. Wang, Z.B., Yin, G.P., Shi, P.F. (2006) J. Alloy. Compd., 420, 126-132. https://doi.org/10.1016/j.jallcom.2005.10.042
  12. Wang, Z.B., Yin, G.P., Shi, P.F. (2007) J. Power Sources, 163, 688-694. https://doi.org/10.1016/j.jpowsour.2006.09.055