• 한국환경과학회지
• /
• 제17권6호
• /
• pp.623-631
• /
• 2008

Many recent studies have concentrated upon the radiative effects of atmospheric aerosols. Though their scattering and absorption of radiation, aerosols can also induce some other important environment effects. In this study, new radiation code and aerosol data within Atmosphere General Circulation Model (AGCM) is used to assess the aerosol radiative forcing and to analyze relative climate effects. The new Kangnung National University AGCM Stratospheric-15 (KNU AGCM ST15) was integrated by using two sets of radiative effect of aerosols: CTRL as not a radiative effect of aerosols and AERO as a radiative effect of aerosols. Two cases show the difference of net shortwave radiation budget at top-of-atmosphere (TOA) is found to be about $-3.4Wm^{-2}$, at the surface (SFC) is about $-5.6Wm^{-2}$. Consequently the mean atmospheric absorption due to aerosol layer in global is about $2.2Wm^{-2}$. This result confirms the existence of a negative forcing due to the direct effect of aerosols at the surface and TOA in global annual mean. In addition, it is found that cooling over at the surface air temperature due to radiative effect of aerosols is about $0.17^{\circ}C$. It is estimated that radiative forcing of the net upward longwave radiation taken as the indirect effect of aerosol is much smaller than that of the direct effect as there is about $0.2Wm^{-2}$ of positive forcing both at TOA and at SFC. From this study, It made an accurate estimation of considering effect of aerosols that is negative effect. This may slow the rate of projected global warming during the $21^{st}$ century.

• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.435-444
• /
• 2017

In this study, we investigated the effect of aerosol feedback on $PM_{10}$ simulation using a two-way coupled air quality model (WRF-CMAQ). $PM_{10}$ concentration over Korea in January 2014 was simulated, and the aerosol feedback effect on the simulated solar radiation was intensively examined. Two $PM_{10}$ simulations were conducted using the WRF-CMAQ model with (FB) and without(NFB) the aerosol feedback option. We find that the simulated solar radiation in the west part of Korea decreased by up to $-80MJ/m^2$ due to the aerosol feedback effect. The feedback effect was significant in the west part of Korea, showing high $PM_{10}$ estimates due to dense emissions and its long-range transport from China. The aerosol feedback effect contributed to the decreased rRMSE(relative Root Mean Square Error) for solar radiation (47.58% to 30.75%). Aerosol feedback effect on the simulated solar radiation was mainly affected by concentration of $PM_{10}$. Moreover, FB better matched the observed solar radiation and $PM_{10}$ concentration than NFB, implying that taking into account the aerosol direct effects resulted in the improved modeling performance. These results indicate that aerosol feedback effects can play an important role in the simulation of solar radiation over Korean Peninsula.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.31-39
• /
• 1999

A good atomization in uniform size brings the elevation of thermal efficiency in spray combustion, the beautiful painting on surfaces, and the economical sprinkling of chemicals. Ultrasonic atomization has been expected as a good uniform atomization mechanism due to its uniform size distribution. Influx, load, and physical properties of liquids are the effecting factors to atomize liquids. In this study, distilled water and city water are selected as reference liquids and gasoline, kerosene, and petroleum as fuel liquids. Characteristics and affinity to get the maximum effect for the ultrasonic atomization are observed by using the two ultrasonic transducers with 28kHz and 2MHz. Results show that the size distributions of liquid spray dorplet by the direct vibration method prevail over those by the aerosol method in uniform droplet size and as a whole, sizes of spray liquid droplets are increased slightly according to increasing influx in the direct vibration method and quantities of spray droplets in the aerosol method decreasing according to increasing liquid load h.

• 한국입자에어로졸학회지
• /
• 제5권2호
• /
• pp.45-52
• /
• 2009

Black carbon, which is a by-product of combustion of fossil fuel and biomass burning, is the component that imposes the largest uncertainty on quantifying aerosol climate effect. The direct, indirect and semi-direct climate effects of black carbon depend on its state of the mixing with other water-soluble aerosol components. The process that transforms hydrophobic externally mixed black carbon particles into hygroscopic internally mixed ones is called "aging". In most climate models, simple parameterizations for the aging time scale are used instead of solving detailed dynamics equations on the aging process due to the computation cost. In this study, a new parameterization for the black carbon aging time scale due to condensation and coagulation is presented as a function of the concentration of hygroscopic atmospheric components and the black carbon particle size. It is shown that the black carbon aging time scale due to condensation of sulfuric acid vapors varies to a large extent depending on the sulfuric acid concentration and the black carbon particle size. This result indicates that the constant aging time scale values suggested in the literature cannot be directly applied to a global scale modeling. The aging time scale due to coagulation with internally mixed aerosol particles shows an even stronger dependency on particle size, which implies that the use of a particle-size-independent aging time scale may lead to a large error when the aging is dominated by coagulation.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.205-206
• /
• 2003

대기중의 에어로졸은 지구-대기 시스템에 직접효과(direct effect)와 간접효과(inderect effec)로 불리우는 복사효과를 나타내어 지구복사수지에 영향을 미치는 인자이다. 또한 대기중에서 비교적 짧은 체류시간과 공간적인 변화성으로 인하여 제역적인 효과가 매우 크게 일어남에도 불구하고 그 효과가 정확히 알려져 있지 않다 (IPCC, 200l). 따라서 지역적인 규모의 에어로졸의 복사특성 관측이 중요한 요소가 되었다. 이러한 연구의 일환으로 수행된 일련의 프로젝트들은 TARFOX(Tropospheric Aerosol Radiative Forcing Obserational Experiment; Russel et al., 1999). (중략)

• 대한원격탐사학회지
• /
• 제33권3호
• /
• pp.301-311
• /
• 2017

에어로솔의 광학특성과 연직고도는 태양 복사의 반사와 흡수과정을 통하여 지구복사수지에 영향을 미치게 된다. 본 연구에서는 복사전달모델과 위성관측자료를 이용하여 동북아시아 지역에서 구름의 존재 시 에어로솔 층에 의한 복사특성을 분석하였다. 복사전달 모의 결과는 구름이 하부에 존재하는 경우에 에어로솔 층의 고도가 높아짐에 따라 대기 온난화 효과가 증가하였다. 이러한 관계는 에어로솔의 광 흡수성이 커질수록, 지표 반사도가 증가할수록 비례하는 경향을 나타내었다. 그리고 연구대상지역 ($20-50^{\circ}N$, $110-140^{\circ}E$)에서 주요 에어로솔 이벤트 사례에 대하여, UV Absorbing Aerosol Index (AAI) derived from Total Ozone Mapping Spectrometer (TOMS), cloud parameters derived from the Moderate Resolution Imaging Spectro-radiometer (MODIS), with Upward Shortwave Flux (USF) Clouds and the Earth's Radiant Energy System (CERES) 위성관측자료를 이용하여 광 흡수성 에어로솔에 의한 영향을 정량적으로 분석하였다. 각 사례에 대한 평균적인 복사효과는 약 6 - 26 %에 해당하는 상향 단파 복사량의 감쇄효과가 나타났다. 이러한 결과는 에어로솔에 의한 직접효과와 간접효과를 정량화 하기 위한 중요성을 설명해 준다.

• 한국환경과학회지
• /
• 제26권10호
• /
• pp.1167-1180
• /
• 2017

Numerical Weather Prediction (NWP) models such as the Weather Research and Forecasting (WRF) model are essential for forecasting one-day-ahead solar irradiance. In order to evaluate the performance of the WRF in forecasting solar irradiance over the Korean Peninsula, we compared WRF prediction data from 2008 to 2010 corresponding to weather observation data (OBS) from the Korean Meteorological Administration (KMA). The WRF model showed poor performance at polluted regions such as Seoul and Suwon where the relative Root Mean Square Error (rRMSE) is over 30%. Predictions by the WRF model alone had a large amount of potential error because of the lack of actual aerosol radiative feedbacks. For the purpose of reducing this error induced by atmospheric particles, i.e., aerosols, the WRF model was coupled with the Community Multiscale Air Quality (CMAQ) model. The coupled system makes it possible to estimate the radiative feedbacks of aerosols on the solar irradiance. As a result, the solar irradiance estimated by the coupled system showed a strong dependence on both the aerosol spatial distributions and the associated optical properties. In the NF (No Feedback) case, which refers to the WRF-only stimulated system without aerosol feedbacks, the GHI was overestimated by $50-200W\;m^{-2}$ compared with OBS derived values at each site. In the YF (Yes Feedback) case, in contrast, which refers to the WRF-CMAQ two-way coupled system, the rRMSE was significantly improved by 3.1-3.7% at Suwon and Seoul where the Particulate Matter (PM) concentrations, specifically, those related to the $PM_{10}$ size fraction, were over $100{\mu}g\;m^{-3}$. Thus, the coupled system showed promise for acquiring more accurate solar irradiance forecasts.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.442-447
• /
• 2006

In semiconductor manufacturing clean rooms, it becomes important to remove airborne molecular contaminants as well as particulate contaminant in outdoor air introduced into clean rooms. One suitable control technique for these chemical contaminants is air washing by water in an outdoor air handling unit. In order to enhance the removal efficiency of chemical contaminants the effect of adding a heating and humidifying process before an air washer was examined.

• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.189-197
• /
• 2009

Wet-type particulate removal system is employed in most of ironmaking processes. These de-dusting systems require additional downstream aggregates for treatment of water and for drying of the collected slurry. Thus dried slurry can be pressed in shape of briquettes and recycled in the steelmaking process. Different from the wet-type, the dry-type particulate removal systems generate no slurry. A high-temperature, high-pressure de-dusting system with inertial inlet was developed. The target application of this system was to remove particulate matter generated from the novel ironmaking process and other steelmaking processes. In this study we conducted tests with this newly developed system to evaluate the performance of the silica-carbide (SiC) ceramic filters. In addition, for purpose of comparison, we also conducted tests with a unit which has conventional direct inlet. Fe-Particles collected from the novel ironmaking process were used in our tests as test dusts. The temperature and the pressure were kept constant at their respective values $800^{\circ}C$ and $3kg_f/cm^2$.

• 한국지구과학회지
• /
• 제29권2호
• /
• pp.128-139
• /
• 2008

본 연구에서는 에어러솔 대기 상태에서 국내 COMS 연구자들이 사용하는 세 개의 단파 복사전달모델에서 산출된 복사속 성분을 비교분석하였으며, 대기 복사 수지에서 에어러솔 역할도 분석하였다. 국내 모델들의 평가를 위하여, 15개 모델값을 평균한 Halthore et al.(2005) 결과를 기준값으로 사용하였다. 두 종류 에어러솔 농도(AOT=0.08, 0.24)에서 조사된 열대 또는 한대 대기의 에어러솔 강제력은 지표에서의 하향 일사 및 상향 산란, 대기 상부의 상향 산란, 그리고 대기 흡수도의 복사 성분들에 있어서 국외 연구에 비하여 국내 결과들에서 체계적으로 약하게 나타났다. 에어러솔 강제력은 지표에서의 하향 일사에 대하여 $-10{\sim}-40Wm^{-2}$ 이었으며, 지표 및 대기 상부의 상향 산란의 경우에 상대적으로 큰 태양천정각과 고농도 에어러솔 상태에서 컸다. 두 종류 에어러솔 조건에서 지표에서의 하향 및 상향 산란값들은 대기 종류보다는 태양천정각에 더 민감하였다. 하향 산란은 상대적으로 작은 태양천정각과 고농도 에어러솔 조건에서 컸다. 에어러솔 농도 증가는 하향 산란 증가에도 불구하고 하향 직달 일사의 감소가 이를 초과함으로써 지표 냉각을 유도하는 것으로 조사되었다. 동일한 에어러솔 농도 및 태양천정각 조건에서 직달일사 소산은 열대 대기에서는 주로 수증기, 그리고 한대 대기에서는 수증기뿐만 아니라 오존에도 기인하는 것으로 조사되었다. 특히 열대 대기에서는 수증기의 역할이 오존에 비하여 $3{\sim}4$배 컸다. 저농도 및 고농도 에어러솔 대기에서 대기 흡수도는 국내외 연구간에 ${\pm}10%$ 내에서 일치하였다.