• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.423-431
• /
• 2016

In this study, wing design optimization for long-endurance unmanned aerial vehicles (UAVs) is investigated. The fluid-structure integration (FSI) analysis is carried out to simulate the aeroelastic characteristics of a high-aspect ratio wing for a long-endurance UAV. High-fidelity computational codes, FLUENT and DIAMOND/IPSAP, are employed for the loose coupling FSI optimization. In addition, this optimization procedure is improved by adopting the design of experiment (DOE) and Kriging model. A design optimization tool, PIAnO, integrates with an in-house codes, CAE simulation and an optimization process for generating the wing geometry/computational mesh, transferring information, and finding the optimum solution. The goal of this optimization is to find the best high-aspect ratio wing shape that generates minimum drag at a cruise condition of $C_L=1.0$. The result shows that the optimal wing shape produced 5.95 % less drag compared to the initial wing shape.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.91-98
• /
• 2011

측풍 시 AREX 열차에 가해지는 공기역학적 하중을 측정하기 위하여 풍동시험이 수행되었다. 5% 축소 시험 모델은 연결부, 하부 및 대차부 등을 포함하여 가능한한 자세하게 모델링되었다. 시험에 사용된 풍동은 폭 4m $\times$ 높이 3m 의 시험부를 가진 한국항공우주연구원(KARI)의 중형 아음속 풍동이다. 두 종류의 선로 모형에 놓여진 열차 모델에 가해지는 공기역학적 하중과 모멘트는 요각에 따라 도시되었으며, 실험 조건에 따른 공력 계수의 특성이 분석되었다.

• Advances in aircraft and spacecraft science
• /
• 제1권1호
• /
• pp.69-91
• /
• 2014

Numerical investigations are presented, which show that a back-flow flap can improve the dynamic stall characteristics of oscillating airfoils. The flap was able to weaken the stall vortex and therefore to reduce the peak in the pitching moment. This paper gives a brief insight into the method of function of a back-flow flap. Initial wind tunnel experiments were performed to define the structural requirements for a detailed experimental wind tunnel characterization. A structural integration concept and two different actuation mechanisms of a back-flow flap for a helicopter rotor blade are presented. First a piezoelectric actuation system was investigated, but the analytical model to estimate the performance showed that the displacement generated is too low to enable reliable operation. The seond actuation mechanism is based on magnetic forces to generate an impulse that initiates the opening of the flap. A concept based on two permanent magnets is further detailed and characterized, and this mechanism is shown to generate sufficient impulse for reliable operation in the wind tunnel.

• 음성과학
• /
• 제7권1호
• /
• pp.109-141
• /
• 2000

Acoustic and aerodynamic characteristics of Cheju consonants were examined with the focus on the well-known three-way distinction among stops (i.e., lenis, fortis, aspirated) and the two-way distinction between sand s*. Acoustic parameters examined for the stops included VOT, relative stop burst energy, Fo at the vowel onset, H1-H2, and H1-F2 at the vowel onset. For the fricatives s and s*, acoustic parameters were fricative duration, Fo, centroid of the fricative noise, RMS energy of the frication, H1-H2 and Hl-F2 at the onset of the following vowel. In investigating aerodynamics, intraoral pressure and oral flow were included for the bilabial stops. Results indicate that, although Cheju and Korean are not mutually intelligible, acoustic and aerodynamic properties of Cheju consonants are very similar in every respect to those of the standard Korean. Among other findings there are three crucial points worth recapitulating. First, stops are systematically differentiated by the voice quality of the following vowel. Second, stops are also differentiated by aerodynamic mechanisms. The aspirated and fortis stops are similar in supralaryngeal articulation, but employ a different relation between intraoral pressure and flow. Finally, our study suggests that the fricative s is better categorized as 'lenis' than as 'aspirated' in terms of its phonetic realization.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.393-404
• /
• 2017

Side jet effect on the aerodynamic characteristics of a missile was investigated using experimental and computational methods. A couple of side jets were injected toward outward downstream at mid point of missile body. Cold air jet was used in the wind tunnel test, and cold and hot jet were used in the computation. Wind tunnel test was carried out with jet and without jet, and calculation was performed for three cases ; no jet, cold air jet, and hot mixture gas jet. From the comparison of measured and calculated data for all cases, two points could be deduced. Firstly, side jet made static stability to be unstable by increasing body normal force near the side jet exit and by decreasing tail normal force. Secondly, hot mixture gas had more significant effect on the static stability of a missile-type body than cold air jet.

• Wind and Structures
• /
• 제1권3호
• /
• pp.225-241
• /
• 1998

The high-rise supporting towers of long-span suspension and cable-stayed bridges commonly comprise a pair of slender prisms of roughly square cross-section with a center-to-centre spacing of from perhaps 2 to 6 widths and connected by one or more cross-ties. The tower columns may have a constant spacing as common for suspension bridges or the spacing may reduce towards the top of the tower. The present paper is concerned with the aerodynamics of such towers and describes an experimental investigation of the overall aerodynamic forces acting on a pair of square cylinders in two-dimensional flow. Wind tunnel pressure measurements were carried out in smooth flow and with a longitudinal intensity of turbulence 0.10. Different angles of attack were considered between $0^{\circ}$ and $90^{\circ}$, and separations between the two columns from twice to 13 times the side width of the column. The mean values of the overall forces proved to be related to the bias introduced in the flow by the interaction between the two cylinders; the overall rms forces are related to the level of coherence between the shedding-induced forces on the two cylinders and to their phase. Plots showing the variation of the force coefficients and Strouhal number as a function of the separation, together with the force coefficients spectra and lift cross-correlation functions are presented in the paper.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.421-430
• /
• 2018

The shape of a yacht sail made of thin fabric materials is easily deformed by wind speed and direction and it is affected by the deformation of the standing rig such as mast, boom, shrouds, stays and spreaders. This deformed sail shape changes the air flow over the sail, it makes the deformation of the sail and the rig again. To get a sail performance accurately these interactive behavior of sail system should be studied in aspects of the aerodynamics and the fluid-structure interaction. In this study aerodynamic analysis for the sail system of a 30 feet sloop is carried out and the obtained dynamic pressure on the sail surface is applied as the loading condition of the calculation to get the deformations of the sail shape and the rig. Supporting forces by rig are applied as boundary condition of the structure deformation calculations. And the characteristics of the air flow and the dynamic pressure over the deformed sail shape is investigated repeatedly including the lift force and the location of CE.

• Wind and Structures
• /
• 제37권5호
• /
• pp.331-346
• /
• 2023

This work investigates the effects of transverse inclination on an aeroelastic prism through forced-vibration wind tunnel experiments. The aerodynamic characteristics are tri-parametrically evaluated under different wind speeds, inclination angles, and oscillation amplitudes. Results show that transverse inclination fundamentally changes the wake phenomenology by impinging the fix-end horseshoe vortex and breaking the separation symmetry. The aftermath is a bi-polar, one-and-for-all change in the aerodynamics near the prism base. The suppression of the horseshoe vortex unleashes the Kármán vortex, which significantly increases the unsteady crosswind force. After the initial morphology switch, the aerodynamics become independent of inclination angle and oscillation amplitude and depend solely on wind speed. The structure's upper portion does not feel the effect, so this phenomenon is called Base Intensification. The phenomenon only projects notable impacts on the low-speed and VIV regime and is indifferent in the high-speed. In practice, Base Intensification will disrupt the pedestrian-level wind environment from the unleashed Bérnard-Kármán vortex shedding. Moreover, it increases the aerodynamic load at a structure base by as much as 4.3 times. Since fix-end stiffness prevents elastic dissipation, the load translates to massive stress, making detection trickier and failures, if they are to occur, extreme, and without any warnings.

• 항공우주시스템공학회지
• /
• 제11권6호
• /
• pp.10-16
• /
• 2017

한국항공우주연구원(KARI)이 보유하고 있는 개방형 풍동에서 최대이륙중량 28 kg급 옥터콥터(octocopter)를 시험모델로 상승 하강기류, 측풍, 전단류와 같은 악기상에 대한 대처 능력을 향상 시키고 와류고리상태(VRS)와 같은 공기역학적 현상을 규명하여 와류고리상태(VRS) 진입 예방 및 탈출할 수 있는 기술들을 연구하고자 풍동시험을 수행하였다. 소형무인기 풍동시험은 풍속 3.5, 5, 7 m/sec, 회전수 3,500, 4,500, 5,550rpm 조건에서 받음각 $-40^{\circ}{\sim}+20^{\circ}$ 도, ${\pm}90^{\circ}$ 도, 요각 $0^{\circ}$ 도와 $45^{\circ}$ 도로 변화시켜가며 6분력을 측정하여 공력 DB를 작성하였다. 멀티콥터 수직 하강 시험 시 하강속도 6 m/sec에서 와류고리상태의 최고점(VRS peak)이 나타나고, 이 때 약 13 % 정도의 추력감소가 나타났다. 프로펠러 및 동체 상호 간섭에 의한 성능저하 여부를 판단하기 위해 프로펠러 조합을 변화시켜가며 시험을 수행한 결과 단일 프로펠러 대비 최대 15 % 정도의 성능 저하가 있음을 확인할 수 있었다. 이번 시험으로 확보한 자료들은 소형무인기 운용 시 경험하게 되는 악기상에 대처하여 안전성과 생존성을 증대시키기 위한 기술개발 기초자료로 활용될 예정이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.263-266
• /
• 2000

An elliptical ogive head for a generic missile is proposed to reduce its detectable probability from a ground defense radar. Numerical RCS results of a generic missile with an elliptical ogive head are evaluated using the GTD/UTD (Geometrical Theory of Diffraction/Uniform GTD). The results are compared with those of a cylindrical ogive head. In the sense of aerodynamics, the Performance evaluation of an elliptical ogive head for a generic missile should be followed.