• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.93-100
• /
• 2013

본 연구에서는 트윈박스 단면인 이순신대교의 레이놀즈수 변화에 따른 공기력의 영향을 살펴보는데 그 목적이 있다. 이를 위하여 1/30 대축척 모형을 제작하여 공군사관학교 아음속 중형 풍동에서 최대 풍속 70m/s까지 풍속을 증가시켜가면서 공기력을 측정하여, 전북대학교 소형풍동에서 수행한 저레이놀즈수 풍동실험 결과와 비교하였다. 본 연구 대상 교량 단면은 레이놀즈수의 영향을 받는 것으로 나타났으며, 고레이놀즈수 실험 결과 기존 저레이놀즈수 실험보다 항력계수는 약 23%정도 낮은 수준인걸로 나타났다. 또한 경계층 촉진장치를 효과적으로 이용하면 기존의 저레이놀즈수 풍동실험 조건에서 고레이놀즈수 모사 실험이 가능한 것으로 판단된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.8-16
• /
• 2017

Most of small air vehicles with moving wing fly at low Reynolds number condition and the reduced frequency of the moving wing ranges from 0.0 to 1.0. The physical phenomena over the wing dramatically vary with the reduced frequency. This study examines experimentally the effect of the reduced frequency at low Reynolds number. The NACA0012 airfoil performs sinusoidal pitching motion with respect to the quarter chord with the four reduced frequencies of 0.1, 0.2, 0.4 and 0.76 at the Reynolds number $2.3{\times}10^4$. Smoke-wire flow visualization, unsteady surface pressure measurement, and unsteady force calculation are conducted. At the reduced frequency of 0.1 and 0.2, various boundary layer events such as reverse flow, discrete vortices, separation and reattachment change the amplitude and the rotation direction of the unsteady force hysteresis. However, the boundary layer events abruptly disappear at the reduced frequency of 0.4 and 0.76. Especially at the reduced frequency of 0.76, the local variation of the unsteady force with respect to the angle of attack completely vanishes. These results lead us to the conclusion that the unsteady aerodynamic characteristics of the reduced frequency of 0.2 and 0.4 are clearly distinguishable and the unsteady aerodynamic characteristics below the reduced frequency of 0.2 are governed by the boundary layer events.

• Wind and Structures
• /
• 제30권6호
• /
• pp.633-648
• /
• 2020

The objective of this work was to investigate the interference effects of two-parallel bridge decks on aerodynamic coefficients, vortex-induced vibration, flutter instability and flutter derivatives. The two bridges have significant difference in cross-sections, dynamic properties, and flutter speeds of each isolate bridge. The aerodynamic static tests and aeroelastic tests were performed in TU-AIT boundary layer wind tunnel in Thammasat University (Thailand) with sectional models in a 1:90 scale. Three configuration cases, including the new bridge stand-alone (case 1), the upstream new bridge and downstream existing bridge (case 2), and the downstream new bridge and the upstream existing bridge (case 3), were selected in this study. The covariance-driven stochastic subspace identification technique (SSI-COV) was applied to identify aerodynamic parameters (i.e., natural frequency, structural damping and state space matrix) of the decks. The results showed that, interference effects of two bridges decks on aerodynamic coefficients result in the slightly reduction of the drag coefficient of case 2 and 3 when compared with case 1. The two parallel configurations of the bridge result in vortex-induced vibrations (VIV) and significantly lower the flutter speed compared with the new bridge alone. The huge torsional motion from upstream new bridge (case 2) generated turbulent wakes flow and resulted in vertical aerodynamic damping H1^* of existing bridge becomes zero at wind speed of 72.01 m/s. In this case, the downstream existing bridge was subjected to galloping oscillation induced by the turbulent wake of upstream new bridge. The new bridge also results in significant reduction of the flutter speed of existing bridge from the 128.29 m/s flutter speed of the isolated existing bridge to the 75.35 m/s flutter speed of downstream existing bridge.

• 유기물자원화
• /
• 제18권3호
• /
• pp.77-86
• /
• 2010

본 연구에서는 간접흡입식 풍력선별기의 모델에 대하여 폐기물의 선별특성을 전산유체역학적인 방법으로 고찰하여 폐기물 모델에 대한 적정한 항력계수 및 흡입풍속에 대한 결과를 얻었다. 개발중인 풍력선별기는 송풍기를 설치하여 공기를 사이클론 후단에서 흡입하는 방식으로 선별 폐기물이 송풍기 회전차를 통과하지 않는 특징이 있으며, 흡입구의 특성 및 배관의 압력손실이 선별효율에 큰 영향을 미칠 수 있다. 풍력선별기를 이용한 폐기물을 선별하기 위해서는 폐기물의 공기역학적 특성에 대한 사전연구가 필수적이다. 비닐의 경우 약 0.8~1.0 내외의 항력계수를 적용하는 것이 타당하며, 캔은 압축여부에 따라 차이가 있으나 0.2~0.7의 범위에 있다. 풍력선별기의 흡입유속에 따른 선별효율은 약 25~26 m/s의 흡입유속에서 가장 높은 효율을 얻었다. 흡입구의 형상, 이송덕트의 배관방법에 따라 압력손실이 발생하여 흡입유속이 변화하므로 표준화를 통해 적절한 설계가 가능하도록 지속적인 연구가 필요하다.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.149-157
• /
• 2014

In this paper, we investigated the sensitivity of aerostatic force coefficients of multi-layer radom in the various wind speeds. The test was conducted in KOCED Wind Tunnel Center in Chonbuk National University, and wind speeds were in the range from 5 m/s to 26 m/s in order to determine the Reynolds number independence. The test results of present multi-layer radom were not affected by the Reynolds number, The maximum positive pressure coefficient was found to be 1.08 at the center of the front of the plane in angle of attack of 0 degree, the maximum negative pressure coefficient was -2.03 at the upper right corner in angle of attack of 120 degree, while maximum drag coefficient was 1.11 in angle of attack of 180 degree.

• 한국시뮬레이션학회논문지
• /
• 제28권2호
• /
• pp.23-33
• /
• 2019

작은 세장비(aspect ratio)를 갖는 형상의 자탄(sub-munition)은 자유낙하 시 비행 자세 안정성이 불량하고 항력조절이 어렵다. 이러한 문제점을 해결하기 위해 일반적인 비행 날개 대신 그리드핀이라고 불리는 핀을 설계하여 자탄에 적용하였다. 우선 자탄의 기본모델을 설정하고, 해당 모델에 대한 자유낙하 하는 천음속(transonic) 조건에서의 전산해석이 수행되었으며 풍동시험을 통해 전산해석 결과를 검증하였다. 기본모델의 경우 요구되는 수준의 높은 항력은 얻었으나 자세 안정성이 확보되지 않았다. 이를 개선하기 위해 그리드핀의 설계변수 중 하나인 웹 두께(web-thickness)를 변경하여 2종의 핀을 추가로 설계하였으며 해당 설계안에 대한 전산해석을 수행하였다. 수행 결과, 웹 두께가 가장 얇은 조건에서 자세 안정성이 가장 우수하게 확보되었으며 항력계수도 큰 값을 유지하였다. 해석 결과를 기반으로 그리드핀 설계를 완료하고, 자탄에 대한 공력자료를 확보하여 이를 토대로 자탄의 탄도를 예측할 수 있는 기반이 마련되었다. 또한, 그리드핀이 다양한 형태의 비행체와 탄에 사용될 수 있을 것으로 기대된다.

• 한국항공우주학회지
• /
• 제47권4호
• /
• pp.245-255
• /
• 2019

본 논문에서는 유도무기의 선두부 형상 절단 비율에 따라서 달라지는 공력특성에 대해 전산유체역학을 이용하여 분석하였다. 해석을 수행하는 형상은 유도무기 동체만 있으며 직경대 길이비는 10.7이다. 선두부 형상은 세 가지를 선택했으며 구형, 25% 절단, 50% 절단형을 비교하였다. 유도무기 동체의 정확한 해석을 위해서 NASA의 풍동시험 데이터를 이용하여 격자 구성법과 해석 기법을 선택하고 검증하였다. 선두부 세 가지 형상에 대해서 비행마하수에 대해 항력을 분석한 결과 절단과 구형이 6~20% 정도 차이 났으며, 동체의 선두부와 기저부의 압력분포를 통해 특성을 분석하였다.

• Advances in aircraft and spacecraft science
• /
• 제6권3호
• /
• pp.239-256
• /
• 2019

This study develops a dual purpose: i) evaluating the effects of two different Mars atmosphere models (NASA Glenn and GRAM-2001) on aerodynamics of a capsule (Pathfinder) entering the Mars atmosphere, ii) verifying the feasibility of evaluating the ambient density and pressure by means of the methods by McLaughlin and Cassanto, respectively and therefore to re-build the values provided by the models. The method by McLaughlin relies on the evaluation of the capsule drag coefficient, the method by Cassanto relies on the measurement of pressure at a point on the capsule surface in aerodynamic shadow. The study has been carried out computationally by means of: i) a code integrating the equations of dynamics of the capsule for the computation of the entry trajectory, ii) a DSMC code for the solution of the flow field around the capsule in the altitude interval 50-100 km. The models show consistent differences at altitudes higher than about 40 km. It seems that the GRAM-2001 model is more reliable than the NASA Glenn model. In fact, the NASA Glenn model produces, at high altitude, temperatures that seem to be too low compared with those from the GRAM-2001 model and correspondingly very different aerodynamic conditions in terms of Mach, Reynolds and Knudsen numbers. This produces pretty different capsule drag coefficients by the two models as well as pressure on its surface, making not feasible neither the method by McLaughlin nor that by Cassanto, until a single, reliable model of the Mars atmosphere is not established. The present study verified that the implementation of the Cassanto method in Mars atmosphere should rely (such as it is currently) on pressure obtained experimentally in ground facilities.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.298-305
• /
• 2006

The flow around a circular cylinder which oscillates rotationally with a relatively high forcing frequency has been investigated experimentally using flow visualization and hot-wire measurements. Dominant parameters are Reynolds number (Re), oscillation amplitude $({\theta}_A)$, and frequency ratio $F_R=f_f/f_n$, where $f_f$ is the forcing frequency and $f_n$ is the natural frequency of vortex shedding. Experiments were carried out under the conditions of $Re=4.14{\times}10^3,\;{\theta}_A={\pi}/6$, and $0{\leq}F_R{\leq}2$. The effect of frequency ratio $F_R$ on the flow structure of wake was evaluated by measuring wake velocity profile and spectral analysis of hot-wire signal. Depending on the frequency ratio $F_R$, the cylinder wake has 5 different flow regimes. The vortex formation length and vortex shedding frequency are changed significantly before and after the lock-on regime. The drag coefficient was reduced under the condition of $F_R<1.0$ and the maximum drag reduction is about 33% at $F_R=0.8$. However, the drag is increased as $F_R$ increases beyond $F_R=1.0$. This active flow control method can be effective in aerodynamic applications, if the forcing parameters are selected optimally.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.28-36
• /
• 2006

NSBT(No Slip Boundary Treatment) is a newly developed scheme for the treatment of a no slip condition on the solid wall of obstacle in a flow field. In our research, NSBT was used to perform LBM simulation of a flow over a circular cylinder to determine the flow feature and aerodynamics characteristic of the cylinder. To ascertain the applicability of NSBT on the complex shape of the obstacle, it was first simulated for the case of the flow over a circular and square cylinder in a channel and the results were compared against the solution of Navier-Stokes equation. The simulations were performed in a moderate range of Reynolds number at each cylinder position to identify the flow feature and aerodynamic characteristics of circular cylinder in a channel. The drag coefficients of the cylinder were calculated from the simulation results. We have numerically confirmed that the critical reynolds number for vortex shedding is in the range of 200$\sim$250. For the gap parameter $\gamma$ = 2 cases at Re > 240, the vortex shedding were symmetric and it resembled the Karmann vortex. As the cylinder approached to one wall, the vorticity significantly reduced in length while the vorticity on the other side elongated and the vorticity combined with the wall boundary-layer vorticity. The resultant $C_d$ by LBM concurred with the results of DNS simulation performed by previous researchers.