• 한국항공우주학회지
• /
• 제37권6호
• /
• pp.562-570
• /
• 2009

불어내기식 극초음속 풍동을 이용하여 2차원형 돌출물 주위의 유동 및 공력가열 특성에 대한 실험적 연구를 수행하였다. 실험의 유입 유동 조건은 마하수 7, 단위 레이놀즈수 $2.0{\times}10^6/m$ 이다. 실험 조건은 길이가 다른 두 개의 평판에 세 가지 돌출물이 높이에 따라 변화되며, 실험데이터는 쉴리렌 이미지 가시화 기법과 돌출물 전면에서의 열유속 게이지를 이용한 열유속 측정을 통해 획득되었다. 또한, 본 논문에서는 경계층 천이 탐지기법과 같은 극초음속 유동 실험 기법도 함께 제시하였다. 실험 결과 돌출물 전방에 큰 박리 영역이 관찰되었으며, 박리 영역은 돌출물의 높이와 평판의 길이에 따라 민감하게 변화 하였다. 가장 큰 돌출물의 경우에서만, 돌출물 상부 측정점에서 열유속 측정치의 급격한 점프가 있는 것으로 관찰되었다. 또한 측정된 열유속은 돌출물의 높이가 크고 평판의 길이가 길수록 증가하는 경향성을 보였다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1653-1665
• /
• 2002

One of the most significant problems in the processing of composite materials is residual stresses. The residual stresses may be high enough to cause cracking in the matrix even before external loads are applied and can degrade the integrity of composite structures. In this study, thermo-viscoelastic residual stresses occurred in the polymeric composite cylinder are investigated. This type of structure is used for the launch vehicle fuselage. The time and degree of cure dependent thermo-viscoelastic constitutive equations are developed and coupled with a thermo-chemical process model. These equations are solved with the finite element method to predict the residual stresses in the composite structures during cure. A launch vehicle experiences high thermal loads during flight and re-entry due to aerodynamic heating or propulsion heat, and the thermal loads may cause thermal buckling on the structure. In this study the thermal buckling analysis of composite cylinders are performed. Two boundary conditions such as all clamped and all simply supported are used for the analysis. The effects of laminates stacking sequences, shapes and residual stresses on the critical buckling temperatures of composite cylinders are investigated. The thermal buckling analysis is performed using ABAQUS.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.199-204
• /
• 2017

열전소자를 이용하여 고온의 표면을 능동적으로 냉각하여 적외선 방사량을 줄이는 기술을 소개한다. 공력가열이나 자체 발열 등에 의한 고온 표면 환경을 구현하였고, 여기에 열전소자를 설치하여 냉각하였을 때의 표면 온도와 적외선 방사량을 상용 수치해석 소프트웨어를 사용하여 계산하였다. 이를 통해 특정 환경에서 열전냉각소자를 이용하여 고온 표면에 있어 외부 환경과 비교했을 때의 적외선 방사량 대비를 이론적으로 완전히 제거할 수 있음을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.193-200
• /
• 2010

Through experimental investigations utilizing hypersonic shock tunnel-coaxial thermocouples as well as blow down hypersonic wind tunnel-temperature sensitive paints, the heat flux and the temperature over a protuberance were measured and analyzed. The experimental data were subsequently compared to heat flux data that was obtained by using blow down hypersonic wind tunnel and heat flux gauges. According to the comparison, both sets of data illustrated correlation with one another. The measured heat flux was large when the height of the protuberance was large. Experimental results show that heat flux measurements taken at higher locations were greater than those taken at lower locations. For high protuberances, a severe jump in the heat flux was observed, ranging in values within 0.6-0.7 of the height of the protuberances. However, when the protuberance was sufficiently short, a rise in the heat flux was rarely observed as the protuberance was totally submerged under the separation region.

• 한국항공우주학회지
• /
• 제33권6호
• /
• pp.76-82
• /
• 2005

유도무기의 케이블 페어링은 공력하중 및 기계적 하중으로부터 전선 케이블을 보호하기 위하여 설치된다. 케이블 페어링을 설계하기 위해서는 유도무기 본체와 케이블 페어링 사이의 응력 분포가 필요하다. 본 연구에서는 케이블 페어링의 접착 응력 및 접착 강도 해석 기법을 고찰하여 프로그램화 하였다. 또한, 고온용 접착재에 대한 인장 시험과 3점 굽힘 시험을 통하여 강도를 계측하였고 이를 케이블 페어링의 설계에 적용하였다.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.246-254
• /
• 2017

In this paper, cooling characteristics of seeker windows were examined using the Sinda-Fluint software. Various cooling methods were considered to satisfy the limit temperature of the cooled seeker window which would be exposed to excessive aerodynamic heating conditions by varying coolant type and mass flow rate of coolant. Due to the enhanced heat transfer between the coolant and the seeker window, internally cooled seeker window which uses liquid coolant showed lowered temperature distribution in the window compared to internally cooled seeker window which uses gas coolant. External film cooled seeker window also showed good cooling characteristics because it reduces the convective heat flux to the seeker window fundamentally. It was also confirmed that the temperature and the temperature gradient of seeker windows were significantly reduced for the cases which use external film cooling additionally to the gas and liquid cooled seeker window.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.339-346
• /
• 2015

Aerodynamic flow control phenomena were investigated with a low-current DC surface discharge plasma actuator. The plasma actuator was found to operate in three different discharge modes with similar discharge currents of about 1 mA or less. Stable continuous DC discharge without audible noise was obtained at higher ballast resistances and lower discharge currents. However, even with continuous DC power input, a low-frequency self-pulsed discharge was obtained at lower ballast resistances, and a high-frequency self-pulsed discharge was obtained at higher set-point currents and higher ballast resistances, both with audible noise. The Schlieren image reveals that the low-frequency self-pulsed mode produces a synthetic jet-like flow implying that a gas heating effect plays a role, even though the discharge current is small. The high-frequency self-pulsed mode produces pulsed jets in a tangent direction, and the continuous DC mode produces a steady straight pressure wave. Particle image velocimetry (PIV) images reveal that the induced flow field by the low-frequency self-pulsed mode has flow propagating in the radial direction and centered between the electrodes. The high-frequency self-pulsed mode and continuous DC mode produce flow from the anode to the cathode. The perturbed region downstream of the cathode is larger in the high-frequency self-pulsed mode with similar maximum speeds.

• 한국항공우주학회지
• /
• 제43권10호
• /
• pp.896-901
• /
• 2015

온도 구배에 의한 날개 외피의 열변형 특성을 연구하기 위하여 비행체 날개의 포켓 형상을 본 딴 프레임 외피 구조 시편을 제작하였다. 날개에 발생하는 온도 구배 현상을 효과적으로 모사하기 위하여 프레임 외피 시편의 프레임에 수냉 시스템을 개발, 적용하였다. 공력 특성에 영향을 미치는 날개 외피의 면외 열변형을 정량적으로 평가하기 위하여 디지털 영상 상관 기법(Digital Image Correlation technique, DIC)을 사용하고, 면외 변위 측정 불확도 평가를 통해 측정 정확도를 분석하였다. SUS304 소재로 만들어진 프레임 외피 구조 시편의 시험을 수행하여 온도에 따른 외피의 면외 변형 특성을 성공적으로 획득하였다.

• 한국대기환경학회지
• /
• 제33권6호
• /
• pp.616-625
• /
• 2017

Measurements using five real-time particle samplers were compared to measurements using three NRM (National Reference Method system) filter-based samplers(Gravimetric method) at Incheon, Korea, between May and August, 2014. The purpose of this study was to suggest the quality assurance/quality control (QA/QC) method of each instrument for use in a real-time continuous particle sampler to measure the mass of airborne particles with an aerodynamic diameter less than $2.5{\mu}m$ ($PM_{2.5}$). Five real-time particle samplers of BAM1020, FH62C_14, TEOM, PM-711 and SPM-613 were evaluated by comparing its measured 23 hr average $PM_{2.5}$ concentrations with those measured with NRM filter-based samplers simultaneously. The parameters(e.g. Inlet heating condition, Slope factor, Film response, Intercept, Background, Span value) of the real-time samplers were optimized respectively by conducting test performance evaluation during 7 days in field sampling. For example, inlet heating temperature of TEOM sampler controls $35{\sim}40^{\circ}C$ to minimize the fluctuation of the real-time measurement data and background value of BAM1020 is the key factor affecting the accuracy of $PM_{2.5}$ mass concentration. We classified the $PM_{2.5}$ concentration according to relative humidity (80%) to identify water absorbed in aerosols by measuring the ${\beta}$-ray samplers(BAM1020, FH62C_14) and TEOM. ${\beta}$-ray samplers were not strongly affected by relative humidity that the difference of the average $PM_{2.5}$ concentration was about 5%. On the other hand, The TEOM sampler overestimated $PM_{2.5}$ mass concentration about 15% at low relative humidity (<80%).

• 항공우주기술
• /
• 제6권1호
• /
• pp.157-164
• /
• 2007

GPS 안테나는 위성발사체의 전 비행 구간에서 GPS 위성 신호를 정상적으로 수신하기 하여 발사체의 외피에 설치되어야 한다. 위성발사체의 표면 온도는 발사체가 대기권을 통과하면서 발생하는 열공력의 영향으로 급격하게 상승하며 발사체 외피에 설치되는 GPS 안테나는 극심한 고온 환경에 직접적으로 노출된다. 따라서 위성발사체의 외피에 설치되는 GPS 안테나에 대한 고온 환경 시험 규격은 발사체 내부 시스템의 고온 환경 시험 규격보다 더 가혹하게 설정되어야 한다. 본 논문에서는 KSLV-I 발사체에 탑재될 GPS 안테나의 고온 환경에서 성능 분석 절차 및 결과를 기술하며, GPS 안테나가 고온 환경에서 물리적인 변형이나 내부 LNA(Low Noise Amplifier)의 성능 저하 없이 정상적으로 동작하였을 보여주고 있다.