• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.444-447
• /
• 2009

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The aerodynamic characteristics of NACA 63415 airfoils were predicted via X-FOIL and the post stall characteristics were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the Velux wind tunnel test results. The rated power of the testing rotor is 5kW at design conditions. The power, estimated by use of predicted lift and drag coefficient via X-FOIL becomes a little higher than experimental one.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.679-684
• /
• 2004

Numerical analysis of aerodynamic characteristics was differently performed according to the running situation of the Korean Tilting Train eXpress (TTX) that would be introduced for an improvement in efficiency of the used railroad track. Fluent6.0 was used for the analysis of Non-tilting case, Tilting case and Passing-by case with the model of TTX. As a result, the aerodynamic drag had little difference between Tilting and Non-tilting case. However, pressure contour under the train of Tilting case was not symmetry because the gap between a train and the ground was different at both sides. And this disparity of pressure worked on the side force. In Passing-by case attraction and counterattraction occurred alternately and affected to the opposite train. When two trains were side by side, the maximum attraction was generated especially. Through an analysis of pressure wave in tunnel a large variation of pressure was generated by the bluff nose of TTX. The results in this study would be good data for the aerodynamic characteristic on TTX and provide important information to judgment of running safety.

• Solar Energy
• /
• v.10 no.1
• /
• pp.47-56
• /
• 1990

The aerodynamic performances of Darrieus wind turbine were studied through the wind tunnel model tests and its analytical aerodynamic streamtube model. Hence, analytical streamtube model which is based on momentum and blade element theory is considered and the formulated model was generalized in non-dimensional type to predict the aerodynamic characteristics of Darrieus wind turbine. The analytical model was justified through the wind tunnel model tests for several experimental conditions but in the limited rages. These satisfactory comparative studies between the wind tunnel tests and the analytical predictions can be utilized for the basic reliable design of Darrieus wind turbine.

• Wind and Structures
• /
• v.22 no.5
• /
• pp.573-594
• /
• 2016

Simultaneous pressure measurements on 2D square prisms with various corner modifications were performed in uniform flow with low turbulence level, and the testing Reynolds numbers varied from $1.0{\times}10^5$ to $4.8{\times}10^5$. Experimental models were a square prism, three chamfered-corner square prisms (B/D=5%, 10%, and 15%, where B is the chamfered corner dimension and D is the cross-sectional dimension), and six rounded-corner square prisms (R/D =5%, 10%, 15%, 20%, 30%, and 40%, where R is the corner radius). Experimental results of drag coefficients, wind pressure distributions, power spectra of aerodynamic force coefficients, and Strouhal numbers are presented. Ten models are divided into various categories according to the variations of mean drag coefficients with Reynolds number. The mean drag coefficients of models with $B/D{\leq}15%$ and $R/D{\leq}15%$ are unaffected by the Reynolds number. On the contrary, the mean drag coefficients of models with R/D=20%, 30%, and 40% are obviously dependent on Reynolds number. Wind pressure distributions around each model are analyzed according to the categorized results.The influence mechanisms of corner modifications on the aerodynamic characteristics of the square prism are revealed from the perspective of flow around the model, which can be obtained by analyzing the local pressures acting on the model surface.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.399-407
• /
• 1986

본 연구에서는 공기역학 탄성베어링의 설계에 필요한 기본이론에 대하여 고찰 하고 그의 신빙성을 그러한 베어링에 지지된 고속회전축의 진등측정을 통하여 검토하 고저 한다. 탄성베어링의 한 예로써 여러 개의 탄성박판이 겹쳐 저어널을 지지하는 겹판베어링(

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.11-20
• /
• 2019

A Radome protects the radar from the external environment, and as a part of the stealth technology, a frequency-selective surface (FSS) was applied to the radome. Our study investigates the changes in the electrical transmission characteristics of the missile's FSS radome due to aerodynamic heating in various flight scenarios. Accordingly, we designed a FSS radome with a Jerusalem-cross(JSC) geometry and referred the missile flight scenario in the precedent research. Subsequently, electrical transmission characteristics affected by aerodynamic heating were numerically analyzed over time according to the position of radome. As a result, we found that the average transmission value maximally varies -14.3 dB compared to the initial bandwidth owing to changes in electrical transmission characteristics in flight scenarios.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.882-887
• /
• 2012

This paper describes on the aerodynamic characteristics of the first domestically manufactured aircraft, Buhwalho, in Korea. The computational fluid dynamics(CFD) calculations and wind tunnel test were utilized to investigate the basic aerodynamic characteristics of aircraft with control surface deflections and attitude changes. Variations of lift, drag and pitching moment due to angles of attack and control surface deflections were analyzed and also flight stability due to side force, yawing and rolling moments caused by the change of sideslip angles, rudder and aileron deflections were discussed. Through this study, the meaningful aerodynamic data by CFD calculations and wind tunnel tests were obtained and the flight characteristics based on these data were confirmed accordingly by the flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.849-854
• /
• 2013

Experimental study was conducted to investigate aerodynamic interference effect of wing tip vortex in formation flight of high speed aircraft. In formation flight, wing tip vortex produced by leading aircraft can affect on the aerodynamic characteristics of trailing aircraft. The interference effect of flow is varied with distances between wing tips of leading and trailing aircraft. It is confirmed, in this study, that the interference of wing tip vortex generated from the leading aircraft makes the aerodynamic forces and moments of the trailing aircraft with the vertical or horizontal positions of the trailing aircraft. Especially, the lift coefficients of trailing aircraft were highly increased at y/b=-0.125, z/b=0.0 or deeply decreased at y/b=-0.5, z/b=0.38. The interfering pattern of wing tip vortices from two aircraft is precisely observed.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.26 no.2
• /
• pp.112-116
• /
• 2015

Background and Objectives : Aerodynamic analysis is an examination which provides information regarding various vocalization measures indicating laryngeal efficiency. Voice evaluation using such examination must be capable of distinguishing between normal to abnormal voice. It also observes variables on aerodynamic characteristics by gender in regards to patients of vocal disorders, especially of vocal cord paralysis and vocal polyp, and compares the conditions before and after surgery. This paper therefore, seeks to build a framework for establishing standard levels of aerodynamical characteristic on vocal disorders. Subjects and Methods : The study was intended for a total number of 20 patients with vocal polyp or unilateral vocal cord paralysis. Those with the vocal polyp underwent laryngomycroscopy surgery and the vocal cord paralysis, vocal fold injection using Restylane. Aerodynamic analysis fulfilled the Maximum sustained Phonation (MXPH) and Voicing Efficiency (VOEF) by using PAS Model 6600 (KayPENTAX, USA). Results : In MXPH, increase in PHOT were evident with vocal polyp after surgery. As for patients with vocal cord paralysis, MAXDB, MEADB, DHODB, PHOT all have increased and MEAP, PEF, MEAF decreased after surgery. In VOEF, patients with vocal cord paralysis who underwent surgery showed increase in MAXDB, MEADB, DHODB, FET100, ARES, but decreases in PEF, TARF. Conclusion : Overall, it can be concluded that patients with the vocal polyp and vocal cord paralysis seemed to get closer to the normal values after than before surgery in majority of measures. This confirms that the function of their vocal cord has improved nearly to normality through operations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.2
• /
• pp.144-151
• /
• 2008

An experimental study has been conducted to investigate the effects of circular damage hole on the characteristics of airfoil performance. The damage on a wing created from a hit by anti-air artillery was modeled as a circular hole. Force balance measurements and static pressure measurements on the wing surface were carried out for the cases of having damage holes of 10% chord size at quarter chord and/or half chord positions. All experiments were conducted at Reynolds number of $2.85\times10^5$ based on the chord length. The surface pressure data show big pressure alterations near the circular damage holes. This abnormal surface pressure distribution produces shear stress that could lead to the acceleration of the structural degradation of the wing around the circular damage hole. However, in spite of the existence of circular damage holes, the measured force data indicated the only a slight decrease in lift accompanied by increase in drag compared to the results of undamaged one. The influence of damage hole on the aerodynamic performance was increased as the location of damage moved to the leading edge. The effect on the control force was insignificant when the damaged size was not large.