• 한국추진공학회지
• /
• 제24권5호
• /
• pp.65-76
• /
• 2020

3차원 스크램제트 모델의 설계과정에 있어 3차원 전산해석은 2차원 해석에 비해 상대적으로 복잡한 격자 구성과 많은 해석 시간을 요구한다. 때문에 다양한 조건에서의 3차원 모델의 성능을 확인하는 것은 쉽지 않은 일이다. 따라서 본 연구에서는 2차원 스크램제트 비행체 모델의 전산해석 결과와 비점성 초음속 선형화 이론을 기반으로 2차원 모델의 비행 조건에 따른 공력계수 및 흡입구 질량 포획률 관계식을 도출하였다. 도출된 2차원 성능 관계식과 함께 최소한의 3차원 해석을 수행하여 3차원 스크램제트 모델의 공력 계수와 흡입구 질량 포획률 관계식을 이끌어내었다. 또한 추가적인 3차원 계산을 통해 확장된 3차원 관계식들의 공력 정확도를 검증하였다.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.241-256
• /
• 2010

본 연구에서는 변장비 70에 가까운 도전적인 현수교 단면을 개발하는데 목적을 두고 있다. 이를 위하여 먼저 강박스 현수교의 제원을 수집 분석하였다. 그 결과를 보면 강박스 현수교에서 경간장과 형상변수(교폭, 형고, 변장비, 고폭비)는 상관관계가 낮았고 고유진동수와 형상변수의 상관관계도 낮은 것으로 나타났으며, 상관관계가 높은 경간장과 고유진동수 관계는 신뢰구간별 추정식을 제시하였다. 그리고 교폭, 진동수비, 질량, 질량관성모멘트, 수직 및 비틈 고유진동수 변화에 따른 플러터 풍속의 민감도 분석을 실시하였는데, 타 변수보다 비틈 고유진동수가 플러터 풍속에 미치는 영향이 가장 큰 것으로 나타났다. 주경간장 1111 m인 현수교의 내풍 단면을 개발하기 위하여 최소 단면폭과 형고를 제약조건으로 하여 총 30개의 단면에 대한 풍동실험을 실시하고, 이로부터 한계풍속 기준을 충분히 만족하는 단면을 찾았다. 그리고 다중모드 플러터 해석으로 개발한 단면의 내풍안정성을 검증하였다. 본 연구에서 제시한 세장 단면은 향후 장대 현수교 설계시 활용할 수 있을 것으로 판단된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.389-390
• /
• 2006

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.43-57
• /
• 2012

In a modern aircraft, there are many variations in its mass, stiffness, and aerodynamic characteristics. Recently, an analytical approach was proposed, and this approach uses the idea of uncertainty to find out the most critical flight flutter boundary due to the variations in such aerodynamic characteristics. An analytical method that has been suggested to predict robust stability is the mu method. We previously analyzed the robust flutter boundary by using the mu method, and in that study, aerodynamic variations in the Mach number, atmospheric density, and flight speed were taken into consideration. The authors' previous attempt and the results are currently quoted as varying Mach number mu analysis. In the author's previous method, when the initial flight conditions were located far from the nominal flutter boundary, conservative predictions were obtained. However, relationships among those aerodynamic parameters were not applied. Thus, the varying Mach number mu analysis results required validation. Using an optimization approach, the varying Mach number mu analysis was found out to be capable of capturing a reasonable robust flutter boundary, i.e., with a low percentage difference from boundaries that were obtained by optimization. Regarding the optimization approach, a discrete nominal flutter boundary is to be obtained in advance, and based on that boundary, an interpolated function was established. Thus, the optimization approach required more computational effort for a larger number of uncertainty variables. And, this produced results similar to those from the mu method which had lower computational complexity. Thus, during the estimation of robust aeroelastic stability, the mu method was regarded as more efficient than the optimization method was. The mu method predicts reasonable results when an initial condition is located near the nominal flutter boundary, but it does not consider the relationships that are among the aerodynamic parameters, and its predictions are not very accurate when the initial condition is located far from the nominal flutter boundary. In order to provide predictions that are more accurate, the relationships among the uncertainties should also be included in the mu method.

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1017-1024
• /
• 2012

깃끝단 후퇴각을 가지는 최신 터보프롭 항공기의 프로펠러 블레이드에 대한 공력설계 및 해석을 수행하였다. 프로펠러 형상 설계를 위한 익형은 HS1 계열을 적용하였다. 와류-깃요소 이론(Vortex-Blade element theory)을 기반으로 하고 최소에너지 손실 조건을 만족하는 Adkins의 방법을 적용하여 Conventional 프로펠러 블레이드에 대한 공력설계 및 성능해석을 하였다. 목표 항공기의 설계점에서 코드 길이와 피치각을 변경해 가며 프로펠러 형상을 생성하였다. Conventional 프로펠러 블레이드 형상 정보를 기반으로 코드 길이, 깃끝단 후퇴각을 수정 적용하여 최신 프로펠러를 설계하였다. 전산유체역학을 이용한 설계된 최신 프로펠러 공력특성 분석을 통하여 최신 프로펠러가 적절하게 설계되었음을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.561-568
• /
• 2006

CFD simulation for one of tilt-rotor UAV configurations, TR-E2S1, was performed to investigate its aerodynamic characteristics. Control surfaces such as elevator and rudder were deflected and wing incidence angle was changed. Also aerodynamic stabilities were analyzed with the variation of pitch and yaw angles. The comparison of CFD with wind tunnel test results reveals the same trends in the aerodynamic characteristics and stabilities. However 12% scale wind tunnel test model is too small for accurate data collection and should build a high fidelity model for quantitative data comparison.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.78-82
• /
• 2014

This paper describes a brief aerodynamic design procedure of multi-stage axial turbine. The design procedure was established including one dimensional scratch design, through flow analysis with empirical correlations, two dimensional airfoil design and three dimensional airfoil stacking. Detailed aerodynamic performance assessment was done with full three dimensional CFD method at the design and off design conditions to construct turbine performance map. With the present method, aerodynamic design procedure of 1st and 2nd stages of high pressure turbine for 10,000lbf class turbofan engine was introduced.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.90-96
• /
• 2009

In this study, a generic airfoil designed by the inverse method was evaluated with several candidate airfoils as a first step. Each airfoil was compared with respect to aerodynamic performance to meet the requirement of HALE(high altitude long endurance) aircraft. The second step was to optimize the candidate airfoil using the couple of optimization formulations to down select an optimum airfoil. For the analysis of low Reynolds number 2D flow, Drela's MSES was used. After comparing the aerodynamic results, the best airfoil was chosen to construct the baseline 3D wing. The Navier-Stokes code was used to evaluate the overall aerodynamic performance of designed wing with other wings. The results show that the designed wing has the best performance compared with other wings.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.1-8
• /
• 2005

In this study, unsteady aerodynamic analyses of a wedge-type airfoil based on nonlinear piston theory and Euler equations have been performed in supersonic and hypersonic flows. The third-order nonlinear piston theory (NPT) to calculate unsteady lift and moment coefficients is derived and applied in the time-domain. Also, unsteady flow quantities are obtained from the two-dimensional time-dependent Euler equations. For the CFD based unsteady aerodynamic analyses, an arbitrary Lagrangean-Eulerian (ALE) formulation for the Euler equations is used to calculate flow fluxes in the computational flow field with moving boundaries. Numerical comparisons for unsteady lift and moment coefficients are presented between NPT and Euler approaches. The results show very good agreements in the high supersonic and hypersonic flows. It means that the present NPT can be efficiently used to predict unsteady aerodynamic forces ol wedge type airfoils with dynamic motions in the high supersonic and hypersonic flow regimes.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.9-16
• /
• 2004

This study presents results of aerodynamic wing optimization under uncertainties. To consider uncertainties, an alternative strategy for reliability-based design optimization(RBDO) is developed. The strategy utilizes a single loop algorithm and a sequential approximation optimization(SAO) technique. The SAO strategy relies on the trust region-SQP framework which validates approximated functions at every iteration. Further improvement in computational efficiency is achieved by applying the same sensitivity of limit state functions in the reliability analysis and in the equivalent deterministic constraint calculation. The framework is examined by solving an analytical test problem to show that the proposed framework has the computational efficiency over existing methods. The proposed strategy enables exploiting the RBDO technique in aerodynamic design. For the aerodynamic wing design problem, the solution converges to the reliable point satisfying the probabilistic constraints.