• 한국항행학회논문지
• /
• 제26권5호
• /
• pp.304-311
• /
• 2022

적 방공망 제압 임무는 현대전에서 전략적으로 중요한 임무이지만 적 방공자산에 직접적으로 노출될 위험이 높아 위험 부담이 크다. 따라서, 무인기를 활용하여 임무를 수행하는 것이 하나의 대안으로 제시된다. 본 논문에서는 무인기의 적 방공망 제압 임무 수행을 위한 경로 생성 기법과 생성된 경로에 대한 임무 효과도 산출 기법을 제안한다. 먼저, RRT 기반의 경로 탐색 알고리즘을 기반으로 적의 단거리 대공 위협을 고려할 수 있는 저공 침투/이탈 비행 경로 기법을 다룬다. 또한, 최단의 경로이면서 동시에 적의 단거리 대공 위협을 최대한 회피하는 표적 타격 경로를 생성하기 위해 Dubins 경로 기반의 타격 경로 생성 기법이 사용된다. 이를 통해 생성된 침투/타격/이탈 경로를 순서에 따라 통합한다. 통합된 경로를 기반으로 연료소모량, 무인기의 생존 확률, 임무 수행 소요 시간, 그리고 표적 파괴 확률로 이루어진 임무 효과도를 산출한다. 마지막으로, 제안된 적 방공망 제압 임무 경로 생성 기법 및 임무 효과도 산출 기법을 가상 시나리오를 통해 검증한다.

• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.76-80
• /
• 2017

소형 무인기(UAV: Unmanned Aerial Vehicle)가 급속히 대중화됨에 따라 최근의 UAV 시스템은 각각의 목적에 따라 다양한 분야에서 설계되고 활용되고 있다. 이는 UAV 조정과 관련하여 전자, 센서, 카메라, 소프트웨어 프로그램 등에 이르기까지 많은 새로운 기회를 열어 가고 있으며 저비용 및 혁신적 업무 수행 능력으로 UAV의 활용과 응용 영역의 확대는 새로운 기술 혁신을 주도하고 있다. 특히 소형 UAV는 저고도 상황에서 예측이 힘든 돌발 변화나 장애물 출현 발생 확률이 높은 환경에서 비행을 하여야 한다. 본 논문에서는 소형 UAV 시스템의 자율 비행 기술에 관한 최근의 연구를 소개하고 적대적인 환경에서 소형 UAV의 저비용 센서들을 활용하여 경로 생성과 충돌 회피를 통해 안전하게 목표물에 도착을 유도하는 시험적 방안을 제안 한다.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1253-1259
• /
• 2008

This paper presents a landing controller and guidance law for net-recovery of fixed-wing unmanned aerial vehicles. A linear quadratic controller was designed using the system identification result of the unmanned aerial vehicle. A pursuit guidance law is applied to guide the vehicle to a recovery net with imaginary landing points on the desired approach path. The landing performance of a pure pursuit guidance, a constant pseudo pursuit guidance, and a variable pseudo pursuit guidance is compared. Numerical simulation using an unmanned aerial vehicle model was performed to verify the performance of the proposed landing guidance law.

• 대한원격탐사학회지
• /
• 제22권2호
• /
• pp.123-129
• /
• 2006

고해상도 컬러항공영상은 공간정보생성을 위한 지형의 상세한 정량적 및 정성적 정보를 제공해준다. 하지만 도심지역에서 빌딩 또는 숲에 의한 그림자의 발생으로 인하여 지물 추출 및 분류시 부정확한 결과를 초래 시킬 수 있다. 현재까지 그림자 효과에 대한 여러 연구가 이뤄졌으나 도심지에서 그림자의 발생으로 야기된 분광정보 왜곡의 문제점을 해결하여 도로추출에 대한 연구가 매우 부족한 실정이다 본 연구에서는 컬러항공사진과 LIDAR(LIght Detection and Ranging) 고도 자료를 이용하여 아스팔트 도로 경계선을 추출하는 기법을 제안하였다. 구체적으로 그림자 영향의 제거를 통한 아스팔트 도로 경계선의 추출과정은 다음과 같다. 첫 번째, 항공사진에서 그림자 영역을 LIDAR자료부터 생성된 DSM(Digital Surface Model)과 태양각으로부터 추출하였다. 그 후 도로영역추출기법, 경계선 검출기법을 통하여 도로의 경계를 추출하였으며 이 자료를 벡터화하므로서 GIS벡터의 선분 자료로 생성하였다. 본 연구의 실험결과 제안된 방법은 그림자의 영향을 소거하여 원활한 아스팔트 도로의 경계를 추출하는데 있어서 효과적임을 알 수 있었다.

• 한국운동역학회지
• /
• 제30권4호
• /
• pp.293-299
• /
• 2020

Objective: The aim of this study was to investigate the swing and aerial motion of Kovacs, and evaluate the skill level of Kovacs by Korean adult players on horizontal bar. Method: The subjects for this study were 6 male top athletes participated in the 46th National Gymnastics against Cities and Provinces. After the motions of Kovacs were filmed by digital highspeed camcorder setting in 90 frames/s, kinematical data were calculated through DLT method. The variables were computed in the lapse time, the joint angle, the position·velocity of body COG, the inferred tension force of bar, and body COG path were simulated according to skill level of Kovacs. Results: Firstly, it was revealed that the lapse time was 1.19±0.03 s in the swing phase, and 0.83±0.03 s in the aerial phase. Secondly, it was revealed that the shoulder·hip joint motions of S1 and S2 were better than the other subjects in the swing phase, and the knee joint motions of S1 and S2 were better than the other subjects in the aerial phase. Thirdly, it was revealed that the horizontal·vertical velocity of body COG were -1.40±0.03 m/s, 3.80±0.07 m/s respectively, and the vertical positions of S1 and S2 were higher a little than the other subjects. Lastly, the skill level of Kovacs of this subjects was evaluated into 3 steps; excellent, advanced, normal. They need to train the swing motion including a giant circle, and body motions in the air. Conclusion: It would be suggested that Korean domestic players should improve to increase the vertical velocity at release instant and train to control the limbs elaborately in the air.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.98-109
• /
• 2010

This paper deals with a new method of unmanned aerial vehicle (UAV) recovery when a UAV fails to get a global positioning system (GPS) signal at an unprepared site. The proposed method is based on the simultaneous localization and mapping (SLAM) algorithm. It is a process by which a vehicle can build a map of an unknown environment and simultaneously use this map to determine its position. Extensive research on SLAM algorithms proves that the error in the map reaches a lower limit, which is a function of the error that existed when the first observation was made. For this reason, the proposed method can help an inertial navigation system to prevent its error of divergence with regard to the vehicle position. In other words, it is possible that a UAV can navigate with reasonable positional accuracy in an unknown environment without the aid of GPS. This is the main idea of the present paper. Especially, this paper focuses on path planning that maximizes the discussed ability of a SLAM algorithm. In this work, a SLAM algorithm based on extended Kalman filter is used. For simplicity's sake, a blimp-type of UAV model is discussed and three-dimensional pointed-shape landmarks are considered. Finally, the proposed method is evaluated by a number of simulations.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.207-214
• /
• 2020

Currently, the operation of unmanned aerial vehicle (UAV) is regulated to be able to fly only within the visible range, but in recent years, the needs for operation in the invisible area, in the urban area and at night have increased. In order to operate UAVs in the invisible area, at night, and in the urban area, a flight path for UAVs must be prepared like those operated by manned aircraft, and for this, it is necessary to establish an unmanned aircraft system traffic management (UTM). In order to establish the UTM, information on the minimum separation distance to prevent collisions with UAVs and buildings is required, and accordingly, information on the navigation performance of UAVs is required. In order to analyze the navigation performance of an UAV, total system error (TSE), which is the difference between the planned flight path and the actual location of the UAV, is required. If the collected data are insufficient and classification according to integrity, independence, and direction is not performed, accurate navigation performance is not derived. In this paper, propose a navigation performance analysis method of UAV that is derived TSE using flight data and modeled with normal distribution, analyze performance.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.326-337
• /
• 2010

This work addresses problems regarding trajectory planning for unmanned aerial vehicle sensors. Such sensors are used for taking measurements of large nonlinear systems. The sensor investigations presented here entails methods for improving estimations and predictions of large nonlinear systems. Thoroughly understanding the global system state typically requires probabilistic state estimation. Thus, in order to meet this requirement, the goal is to find trajectories such that the measurements along each trajectory minimize the expected error of the predicted state of the system. The considerable nonlinearity of the dynamics governing these systems necessitates the use of computationally costly Monte-Carlo estimation techniques, which are needed to update the state distribution over time. This computational burden renders planning to be infeasible since the search process must calculate the covariance of the posterior state estimate for each candidate path. To resolve this challenge, this work proposes to replace the computationally intensive numerical prediction process with an approximate covariance dynamics model learned using a nonlinear time-series regression. The use of autoregressive time-series featuring a regularized least squares algorithm facilitates the learning of accurate and efficient parametric models. The learned covariance dynamics are demonstrated to outperform other approximation strategies, such as linearization and partial ensemble propagation, when used for trajectory optimization, in terms of accuracy and speed, with examples of simplified weather forecasting.

• 상하수도학회지
• /
• 제32권6호
• /
• pp.573-581
• /
• 2018

The purpose of this study is to evaluate the fixed wing type domestic UAV for monitoring of algae bloom in aquatic environment. The UAV used in this study is operated automatically in-flight using an automatic navigation device, and flies along a path targeting preconfigured GPS coordinates of desired measurement sites input by a flight path controller. The sensors used in this study were Sequoia multi-spectral cameras. The photographed images were processed using orthomosaics, georeferenced digital surface models, and 3D mapping software such as Pix4D. In this study, NDVI(Normalized distribution vegetation index) was used for estimating the concentration of chlorophyll-a in river. Based on the NDVI analysis, the distribution areas of chlorophyll-a could be analyzed. The UAV image was compared with a airborne image at a similar time and place. UAV images were found to be effective for monitoring of chlorophyll-a in river.

• 한국BIM학회 논문집
• /
• 제6권1호
• /
• pp.1-8
• /
• 2016

This paper provides a method for generating flight path of Unmanned Aerial Vehicle (UAV) that is intended to be used in visual inspection of dome-type nuclear containment building. The method basically employs 3-D model to extract accurate location coordinates. Two basic route patterns that provide guide lines in defining moving locations were defined for each side wall and dome section of the containment. The route patterns support sequential capturing of images as well. In addition, several simple equations and an algorithm for calculation of the moving location on the route were developed on the basis of 3-D geometric characteristics of the containment building. A prototype computer program has been implemented to validate the proposed method, and a case study shows the method can visualize covering area in 3-D model as well.