• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.187-190
• /
• 2007

This study is for analyzing best band in image matching using correlation coefficient of left and right images of stereo image pair, lot red, green, blue band images separated from color aerial photo and gray image converted from the same color aerial photo image. The image matching is applied to construct Digital Elevation Model(DEM) or terrain data. The correlation coefficients and variation by change of pixel patch size are computed from pixel patches of which sizes are $11{\times}11{\sim}101{\times}101$. Consequently, the correlation coefficient in red band image is highest. The lowest is in blue band. Therefore, to construct terrain data using image matching, the red band image is preferable. As the size of pixel patch is growing, the correlation coefficient is increasing. But increasing rate declines from $51{\times}51$ image patch size and above. It is proved that the smaller pixel patch size than $51{\times}51$ is applied to construct terrain data using image matching.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.39-50
• /
• 2001

There has been considerable controversy over the changes in the size of the beaches in the Pusan area; any loss of beach area will have an immense effect on the tourism industry, which is an important source of income for the local economy. The best beaches in Korea are in the Pusan area and were visited by more than 8 million persons in 2000. It is expected that the number of visitors, drawn to the scenic vistas and convenient facilities of this area, will increase annually. Any loss in the size of these swimming beaches will have an important negative effect on tourism income. Therefore, the local governments have gone to great lengths to preserve these beaches, transporting tens of thousands of tons of sand to the beaches before they open each year at a cost of billions of won annually. In this study, we analyzed aerial photographs and tide data for the past 50 years using digital aerial photo analysis and GIS techniques for each 3-year interval. We abstracted beach DEM (digital elevation model) and ortho aerial photographs, and conducted a space analysis. As a result, we were able to identify changes in the area and width of sections of Haeundae Beach.

• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.167-173
• /
• 2004

The erosion(or sediment) reaches very serious level due to the aftermath by the imprudent reclamation on the coast. Continuous studies for long on coastline erosion may be warranted and possible countermeasures proposed because the change of the coastline has been progressed slowly for a long period of time in a wide area. Many experts anticipate that the global sea level's average increase by 19-35 cm due to global warming may certainly have an effect on the coastal erosion throughout the world. Thus, a more rigorous study on the causes of changing coastlines is particularly proposed to find ways to counteract any possible threats against coastal environments. In this study, Ortho aerial photo and hydrographic survey datum were utilized to quantitatively analyze coastal erosion and sediment patterns. This paper also seeks to prove that a parcel under the sea occurred due to relatively significant changes to the coastline. We created Ortho aerial photo using aerial photos taken each decade ('81, '93, '00), overlaid them onto a cadastral registration map, and calculated each amount of erosion and sediment while accounting for the tide level and without considering it. As the result of this study, we could propose that the methods of Ortho aerial photo and the marine observation datum were the effective ways of change detection in erosion, sediment, and artificial reclamation of the coastline for a long time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.17-27
• /
• 2002

It is desirable to use a photogrammetric scanner to minimize the errors from the scanning procedure in case of building aerial photo image DB. The photogrammetric scanner, however, is highly expensive to have only limited number of scanners available, therefore the general-purpose scanners have been considered as an alternative. This study has mainly been focused to see the possibility of the general-purpose scanner to be used for scanning aerial photographs. For that, the analysis of the image coordinates were made as well as the accuracy evaluation of each phase. In addition to that, as the application of the orthophoto images has been increased, the magnitudes of the errors from the DEM generation and orthophoto projection were analyzed. Also, the calibration program was developed to verify the geometric distortion of the automatic scanner to contribute to enhance the quality of the aerial photo image DB.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.105-113
• /
• 2011

Since existing thematic maps have been made with medium- to low-resolution satellite images, they have several shortcomings including low positional accuracy and low precision of presented thematic information. Digital aerial photo image taken recently can express panchromatic and color bands as well as NIR (Near Infrared) bands which can be used in interpreting forest areas. High resolution images are also available, so it would be possible to conduct precision land cover classification. In this context, this paper implemented object-based land cover classification by using digital aerial photos with 0.12m GSD (Ground Sample Distance) resolution and IKONOS satellite images with 1m GSD resolution, both of which were taken on the same area, and also executed qualitative analysis with ortho images and existing land cover maps to check the possibility of object-based land cover classification using digital aerial photos and to present usability of digital aerial photos. Also, the accuracy of such classification was analyzed by generating TTA(Training and Test Area) masks and also analyzed their accuracy through comparison of classified areas using screen digitizing. The result showed that it was possible to make a land cover map with digital aerial photos, which allows more detailed classification compared to satellite images.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.515-522
• /
• 2011

The hydrodynamic models are widely used in the research for analysis of flow characteristics and design of hydraulic structure and river channel. These models need to be calibrated with observed data. But, there are few field data of two-dimensional flow velocity in flood because the direct measurement of the flood flow velocity are very dangerous. For this reason the results of two-dimensional numerical models are usually calibrated and verified with only a few observed data. Moreover, the verification of numerical models for the design flood is usually carried out using the result of one-dimensional model, HEC-RAS. In this study, using the flow velocity profile extracted from the aerial photos of a flood of the Tone River in Japan, two-dimensional numerical models, RAM2 in RAMS, RMA2 in SMS, and one-dimensional numerical model, HEC-RAS which are most widely used in research and design work are verified and the validity for verification of two-dimensional models with HEC-RAS is reviewed. The results showed that the water surface elevation of HEC-RAS, RAM2 and RMA2 models have similar results with observed data. But, the velocity results of RAM2 and RMA2 models in the floodplain have some difference with the velocity from aerial photo analysis. And the velocity result of HEC-RAS has big difference with the sectional averaged value of velocity from aerial photo analysis.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.73-83
• /
• 2008

For spatial analysis and decision-making based on territorial and urban information, technologies on 3D GIS with digital image data and photo-realistic 3D image models to visualize 3D modeling are being rapidly developed. Currently, satellite images, aerial images and aerial LiDAR data are mostly used to build 3D models and textures from oblique aerial photographs or terrestrial photographs are used to create 3D image models. However, we are in need of quality 3D image models as current models cannot express topographic and features most elaborately and realistically. Thus, this study analyzed techniques to use aerial photographs, aerial LiDAR, terrestrial photographs and terrestrial LiDAR to create a 3D image model with artificial features and special topographic that emphasize spatial accuracy, delicate depiction and photo-realistic imaging. A 3D image model with spatial accuracy and photographic texture was built to be served via 3D image map services systems on the Internet. As it was necessary to consider intended use and display scale when building 3D image models, in this study, we applied the concept of LoD(Level of Detail) to define 3D image model of buildings in five levels and established the models by following the levels.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.4
• /
• pp.349-356
• /
• 2016

This study investigates two camera self-calibration approaches, on-site self-calibration and laboratorial self-calibration, both of which are based on self-calibration theory and implemented by using a commercial photogrammetric solution, Agisoft PhotoScan. On-site self-calibration implements camera self-calibration and aerial triangulation by using the same aerial photos. Laboratorial self-calibration implements camera self-calibration by using photos captured onto a patterned target displayed on a digital panel, then conducts aerial triangulation by using the aerial photos. Aerial photos are captured by an unmanned aerial vehicle, and target photos are captured onto a 27in LCD monitor and a 47in LCD TV in two experiments. Calibration parameters are estimated by the two approaches and errors of aerial triangulation are analyzed. Results reveal that on-site self-calibration excels laboratorial self-calibration in terms of vertical accuracy. By contrast, laboratorial self-calibration obtains better horizontal accuracy if photos are captured at a greater distance from the target by using a larger display panel.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.110-112
• /
• 2003

The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multispectral automatic Aerial photographic system. This system's Multi-spectral camera can catch the visible (RGB) and infrared (NIR) bands (3032${\ast}$2008 pixel) image. Our system consists of a thermal infrared camera and automatic balance control, and it managed and controlled by a palm-top computer. And it includes a camera gimbals system, GPS receiver, weather sensor and etc. As a result, we have successfully tested its ability to acquire aerial photography, weather data, as well as GPS data, making it a very flexible tool for environmental data monitoring.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.333-336
• /
• 2007

This paper is the environmental impact assessment of at road design in the light of the sense for the real from the virtual reality. For in this papers, This study developed 3D-model and virtual reality contents by suggesting the environmental impact assessment based on GIS in the road design. And, through this process, it's possible to visualize the environmental impact assessment by constructing the 3D-model and simulation. The 3D-model can be a method to show the road effectively by maximizing the road's shape visually after the construction. The main construction which composes polyhedron model that is generated from digital map and aerial photo is built by mapping the real texture, so the Sense for the Real was more heightened. Through this study, it must be made to shorten a long time exhausting period of conference and construct more real road after due scene consideration by specific and various low-cost strategy in the environmental impact assessment afterwards.