• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.842-848
• /
• 2022

Parametric studies of heat transfer and fluid flow are very important research of interest because the design and operation of fluid flow and heat transfer systems are guided by these parametric studies. The safety of the system operation and system optimization can be determined by decreasing or increasing particular fluid flow and heat transfer parameter while keeping other parameters constant. The parameters that can be varied in order to determine safe and optimized system include system pressure, mass flow rate, heat flux and coolant inlet temperature among other parameters. The fluid flow and heat transfer systems can also be enhanced by the presence of or without the presence of particular effects including gravity effect among others. The advanced Generation IV reactors to be deployed for large electricity production, have proven to be more thermally efficient (approximately 45% thermal efficiency) than the current light water reactors with a thermal efficiency of approximately 33 ℃. SCWR is one of the Generation IV reactors intended for electricity generation. High Performance Light Water Reactor (HPLWR) is a SCWR type which is under consideration in this study. One-eighth of a proposed fuel assembly design for HPLWR consisting of 7 fuel/rod bundles with 9 coolant sub-channels was the geometry considered in this study to examine the effects of system pressure and mass flow rate on wall and fluid temperatures. Gravity effect on wall and fluid temperatures were also examined on this one-eighth fuel assembly geometry. Computational Fluid Dynamics (CFD) code, STAR-CCM+, was used to obtain the results of the numerical simulations. Based on the parametric analysis carried out, sub-channel 4 performed better in terms of heat transfer because temperatures predicted in sub-channel 9 (corner subchannel) were higher than the ones obtained in sub-channel 4 (central sub-channel). The influence of system mass flow rate, pressure and gravity seem similar in both sub-channels 4 and 9 with temperature distributions higher in sub-channel 9 than in sub-channel 4. In most of the cases considered, temperature distributions (for both fluid and wall) obtained at 25 MPa are higher than those obtained at 23 MPa, temperature distributions obtained at 601.2 kg/h are higher than those obtained at 561.2 kg/h, and temperature distributions obtained without gravity effect are higher than those obtained with gravity effect. The results show that effects of system pressure, mass flowrate and gravity on fluid flow and heat transfer are significant and therefore parametric studies need to be performed to determine safe and optimum operating conditions of fluid flow and heat transfer systems.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.5
• /
• pp.157-166
• /
• 2022

Exercise is necessary for a healthy life, but it is recommended that it be conducted in a non-face-to-face environment in the context of an epidemic such as COVID-19. However, in the existing non-face-to-face exercise content, it is possible to recognize exercise movements, but the process of interpreting and providing feedback information is not automated. Therefore, in this paper, to solve this problem, we propose a method of creating a formalized rule to track the contents of exercise and the motions that constitute it. To make such a rule, first make a rule for the overall exercise content, and then create a tracking rule for the motions that make up the exercise. A motion tracking rule can be created by dividing the motion into steps and defining a key frame pose that divides the steps, and creating a transition rule between states and states represented by the key frame poses. The rules created in this way are premised on the use of posture and motion recognition technology using motion capture equipment, and are used for logical development for automation of application of these technologies. By using the rules proposed in this paper, not only recognizing the motions appearing in the exercise process, but also automating the interpretation of the entire motion process, making it possible to produce more advanced contents such as an artificial intelligence training system. Accordingly, the quality of feedback on the exercise process can be improved.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.141-152
• /
• 2020

This thesis is a study on the creation of characters of "personality actors and character actors" among the concepts of "star persona" of S. Prince. This study selected 7 representative films of Jung Woo-sung, a representative personality actor in the Korean film industry, and analyzed how 'Jung Woo-sung-character' is embodied in the film as a character component suggested by R. Dyer. In the traditional sense, the actor's acting has been highly valued for transformation and impersonation in character creation, but discussing the method of creating a character focusing only on the actor's acting in a movie acting implemented in combination with advanced technology I don't think it's suitable for movie acting research. Theorists such as R.Dyer and Edgar Morin, who studied film actors and stars, also emphasize that 'movie actors are different from theater actors' (by the film medium). Therefore, in this thesis, a detailed analysis of the acting of a personality actor was avoided. As Morin pointed out that the character in the movie can be implemented through the actor's image and type, not playing the type of role. I tried to propose the significance of this character creation method of the personality actor by analyzing actor Jung Woo-sung and his character.

• Journal of Advanced Technology Convergence
• /
• v.1 no.1
• /
• pp.15-24
• /
• 2022

This paper tried to investigate the moderating effect of chemyon sensitivity and usage situation in the relationship between self-presentation and brand preference. Data were collected from students of universities located in Chungnam. The analysis results can be summarized as follows. First of all, the effect of self-presentation on symbolic brand preference was not significant in both public and private use situations. On the other hand, the effect of self-presentation on functional brand preference was found to be significant in both situations. Second, the main effect of chemyon sensitivity was significant only when it had a negative effect on functional brand preference in public situations, but was not significant in other cases. Third, looking at the interaction effect of self-presentation and chemyon sensitivity, the brand preference did not show significant changes in those with relatively low chemyon sensitivity, regardless of the level of self-presentation, whether in public or private situations. This study is meaningful in that it reveals that chemyon sensitivity affects brand preference through interaction with self-presentation, whether the consumption situation is public or private.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.969-977
• /
• 2022

In order to respond to the increase in water disasters due to climate change and urbanization, research on low impact development (LID) techniques and application to cities are expanding. The LID technique is a technology that reduces rainwater runoff in the city, controls various water disasters such as flash floods, etc. in an eco-friendly way, and restores the urban water circulation system to a natural water circulation system. However, quantitative analysis of stormwater runoff reduction through the LID technique is insufficient. Therefore, this study analyzed the ratio of the permeable area required to reduce the surface runoff of rainfall (25 mm/hr, 50 mm/hr, 100 mm/hr) with respect to the impervious watershed area of the old city using the permeable pavement. As a result of the analysis, it was found that a permeable area ratio of 7.14 to 12.63% of the total area was required for 25 mm/hr, 15.79 to 26.97% for 50 mm/hr, and 30 to 55.81% for 100 mm/hr.

• Journal of Advanced Technology Convergence
• /
• v.1 no.1
• /
• pp.33-42
• /
• 2022

The flexors and extensors of the knee joint are essential for maintaining body stability. The purpose of this study was to investigate the correlation between the isokinetic parameters of the knee flexor and extensor muscles and the function of the lower extremity muscles. Twenty-two healthy adults participated in this study. The time to peak torque (TTP), acceleration time (AT), and peak torque (PT) of the knee flexor and extensor muscles were measured. A 20m sprint, Sargent jump, one leg hop test, and side shuffle were measured to evaluate lower extremity function. The correlation between each variable was analyzed using Pearson correlation coefficient. PT of the knee flexor showed a significant correlation with single leg hops and 6M hops in a single leg. PT of knee extensors was found to be significantly correlated with Sargent jumps and triple hops. Based on the results of this study, we suggest that the strength of the knee flexor and extensor muscles has the potential to be used to predict lower extremity function.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.889-898
• /
• 2022

In this paper, parallel computing method on the three-dimensional electromagnetic field is proposed. The present electromagnetic scattering analysis is conducted based on the time-harmonic vector wave equation and the finite element method. The edge-based element and 2^nd -order absorbing boundary condition are used. Parallelization of the elemental numerical integration and the matrix assemblage is accomplished by allocating the partitioned finite element subdomain for each processor. The graph partitioning library, METIS, is employed for the subdomain generation. The large sparse matrix computation is conducted by MUMPS, which is the parallel computing library based on the multi-frontal method. The accuracy of the present program is validated by the comparison against the Mie-series analytical solution and the results by ANSYS HFSS. In addition, the scalability is verified by measuring the speed-up in terms of the number of processors used. The present electromagnetic scattering analysis is performed for a perfect electric conductor sphere, isotropic/anisotropic dielectric sphere, and the missile configuration. The algorithm of the present program will be applied to the finite element and tearing method, aiming for the further extended parallel computing performance.

• The Korean Journal of Emergency Medical Services
• /
• v.26 no.2
• /
• pp.97-111
• /
• 2022

Purpose: Automated External Defibrillator (AED) usage in out-of-hospital cardiac arrests (OHCAs) improves the survival of patients. In Singapore, public AEDs are protected by locked boxes with a 'break glass' mechanism to deter theft. Community responders have sustained injuries while breaking glass to retrieve AEDs. This unprecedented study aimed to elucidate the factors influencing successful retrieval of an AED and to document the prevalence of injuries. Methods: A survey was created and distributed. Participants were required to have responded to an OHCA in the past 12 months. Comparison tests were performed with the Fischer-Freeman-Halton Exact test or Pearson chi square test at 5% significance levels, and with multiple logistic regression with a logit link function. Results: Eighty-eight participants were eligible. The success of retrieving an AED was found not to be impacted by occupation, age, gender or time. Participants who responded to an OHCA because of activation by the myResponder App were more likely to retrieve an AED successfully. (AOR 11.111, 95% CI: 2.141-58.824) Conclusion: Use of the myResponder mobile application is associated with the greater success of retrieving an AED. Successful retrieval of an AED is not impacted by time, gender, age, or the occupation of the responder. Community responders in Singapore remain motivated to respond to Cardiac Arrests despite risk of injury.

• Maritime Security
• /
• v.4 no.1
• /
• pp.115-138
• /
• 2022

The Korean military is preparing for successful manpower reduction using advanced science and technology, in addition to carrying out the initiative of the Defense Innovation 4.0. Accordingly, studies on core technologies related to defense reform have been conducted both internally and externally in the military, and the corresponding results have also been applied. Nevertheless, compared to the development of such technologies, it is considered necessary to have more preparation for the policies related to the operation of the newly introduced equipment. As for the placement of personnel and the organization of time in service (TIS) with respect to the operation of surveillance equipment, there has been a tendency to sustain the conventional practice. Therefore, this study intends to suggest the schemes for facilitating policy improvements in the operation of manpower and security regulations in the field of information for the purpose of introducing a successful next-generation coastal guard system. To do this, the approach of this study was focused on the policies for the operation of the guard system. This is in contrast to previous studies that centered on its equipment and technologies. In addition, how to efficiently operate the guard system was also studied in view of cognitive science by deriving the most efficient time for a person to execute surveillance through the monitor based on the previous studies.

• Ocean and Polar Research
• /
• v.45 no.3
• /
• pp.141-153
• /
• 2023

Biological pump processes generated by diatom production in the surface water of the Southern Ocean play an important role in exchanging CO₂ gas between the atmosphere and ocean. In this study, the biogenic opal content of the sediments was measured to elucidate the variation in the primary production of diatoms in the surface water of the Southern Ocean since the last glacial period. A piston core (COR-1bPC) was collected from the Conrad Rise, which is located in the Indian sector of the Southern Ocean. The sediments were mainly composed of siliceous ooze, and sediment lightness increased and magnetic susceptibility decreased in an upward direction. The biogenic opal content was low (38.9%) during the last glacial period and high (73.4%) during the Holocene, showing a similar variation to that of Antarctic ice core ΔT and CO₂ concentration. In addition, the variation of biogenic opal content in core COR-1bPC is consistent with previous results reported in the Antarctic Zone, south of the Antarctic Polar Front, in the Southern Ocean. The glacial-interglacial biogenic opal production was influenced by the extent of sea ice coverage and degree of water column stability. During the last glacial period, the diatom production was reduced due to the penetration of light being limited in the euphotic zone by the extended sea ice coverage caused by the lowered seawater temperature. In addition, the formation of a strong thermocline in more extensive areas of sea ice coverage led to stronger water column stability, resulting in reduced diatom production due to the reduction in the supply of nutrient-rich subsurface water caused by a decrease in upwelling intensity. Under such environmental circumstances, diatom productivity decreased in the Antarctic Zone during the last glacial period, but the biogenic opal content increased rapidly under warming conditions with the onset of deglaciation.