• International Journal of Computer Science & Network Security
• /
• 제21권6호
• /
• pp.269-274
• /
• 2021

Businesses and manufacturing have benefited from the evolution of digital information technology. The introduction of e-commerce has changed the way companies are conducted, and the manufacturing industry is using emerging technologies to automate and synchronize production processes in order to increase productivity and profitability. The results of the study show that incorporating the internet into e-commerce has transformed the process, making it one of the most advanced and high users of digital technology. E-commerce has advanced by leaps and bounds, allowing products and services to flow electronically with minimal delays. Manufacturing has benefited from the implementation of IoT, which has increased the productivity of production processes and is gradually becoming a major beneficiary of modern computer technology.

• 한국주조공학회지
• /
• 제20권6호
• /
• pp.377-385
• /
• 2000

Al matrix composites as the most promising MMCs can be expected to be excellent engineering materials in the nearest future. So as to improve material properties of composite, many manufacturing processes have been developed. Among them, squeeze casting process which offers fine microstructure and near-net-shape is one of the most successful MMCs manufacturing processes. But, in case of with subsieve size particles (under 44 ${\mu}m$), it is very difficult to homogeneously distribute particles in matrix of Al matrix composite by various casting processes, including squeeze casting used so far. Duplex process which was developed in previous study was used to distribute the particle of subsieve size more homogeneously in matrix of Al matrix composite. Microstructures, wear and heat resistance characterization of Al-Si-Cu-Mg-(Ni)/SiCp manufactured by duplex process were examined to clarify the effect of manufacturing conditions, particle size of reinforcement and alloying elements. Al matrix composites reinforced with SiCp(10 ${\mu}m$) have the lowest wear amount among composites reinforced with 3 ${\mu}m$, 5 ${\mu}m$ and 10 ${\mu}m$ SiCp. The wear amount of Al matrix composites with 10 wt.% SiCp(3, 5, 10 ${\mu}m$) was decreased according to the increase of the sliding speed because abrasive wear takes place at high sliding speed of 4m/s and worn debris with block type occurs at low sliding speed of 1m/s. As for heat resistance, it is made clear that remarkable heat resistance property can be obtained by addition of Ni element in Al matrix composites.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.800-807
• /
• 2003

Decomposition of tasks in the ordinary manufacturing systems is usually based on the predefined goal of the system. To achieve the high-level-goals (e.g., factory goal or company goal), several sub-goals should be achieved in advance. However, goals can change along with the current status of the system and the external environmental situations. Thus, a manufacturing system should support the goal-formations which can be bearable these changes for efficient and effective operations. Therefore, it IS necessary to develop a systematic methodology for the goal-formations in a manufacturing system. Especially, the formation and/or change of goals in real-time should be possible for distributed and dynamic systems including the fractal manufacturing system (FrMS). In this paper, a threefold methodology is proposed for the goal-formation process (GFP) in the FrMS; 1) a goal­generating process (GGP) to make and propagate fuzzy goals, 2) a goal-harmonizing process (GHP) to eliminate or reduce conflicts and interferences of goals by using a mobile agent- based negotiation scheme, and 3) a goal-balancing process (GBP) to make a compromise between goals by using quantifiable indicators of the manufacturing system.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.94-103
• /
• 2020

This study investigated the effects of ultrasonic nanocrystal surface modification (UNSM) on the deteriorated surface of AISI SUS316L additively manufactured (AM) using the powder bed fusion (PBF) technique. Specifically, the effects of UNSM conditions on surface topology, hardness, and anti-corrosion were examined. Before UNSM treatment, the stainless steel 316L powder was processed via the PBF machine to prepare a substrate. We observed surface changes due to UNSM treatments in PBF SUS316L substrates and examined the correlation between topology changes, roughness, hardness, and anti-corrosion. After UNSM treatment, the coarse as-built surface was refined, and a regular micro-profile was implemented. Compared to the non-treated PBF sample, the waviness and roughness of the surfaces after UNSM treatment decreased by up to 56.0% and 94.5%, respectively, and decreased further as the interval decreased. The hardness improved by up to 63.0% at a maximum depth of 500 ㎛ from top surface by the UNSM treatment. The results of the corrosion test showed that the corrosion resistance of the UNSM specimens was moderately improved compared to that of the untreated surface. This study confirmed that UNSM is an effective post-processing technique for additively manufactured parts.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.22-27
• /
• 2022

Conventionally, metal materials are produced by subtractive manufacturing followed by melting. However, there has been an increasing interest in additive manufacturing, especially metal 3D printing technology, which is relatively inexpensive because of the absence of complicated processing steps. In this study, we focus on the effect of varying powder size on the synthesis quality, and suggest optimum process conditions for the preparation of AlCrFeNi high-entropy alloy powder. The SEM image of the as-fabricated specimens show countless, fine, as-synthesized powders. Furthermore, we have examined the phase and microstructure before and after 3D printing, and found that there are no noticeable changes in the phase or microstructure. However, it was determined that the larger the powder size, the better the Vickers hardness of the material. This study sheds light on the optimization of process conditions in the metal 3D printing field.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.5-10
• /
• 2000

• 산업공학
• /
• 제12권3호
• /
• pp.382-389
• /
• 1999

Recently the strategic importance of Advanced Manufacturing Technology(AMT) has been increased. This paper focuses on the modelling of diffusion process of AMT from the benefit-cost analytic perspective. The mechanism of AMT diffusion includes the decision-making process of individual firms. By using the model, we can forecast the AMT diffusion level.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.203-204
• /
• 2006

There is an increasing demand for PM-processes with the capability to produce parts of higher complexity than with conventional press and sinter technology in high production numbers. Warm-flow-compaction (WFC) makes use of improved flowability of powders when blended in an appropriate ratio with fine powder fractions and lubricating binders. Here the process is shown with examples of PM-Steels. General features possible with the process like pressing of undercuts and threaded bores are shown.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1497-1500
• /
• 2006

Inkjet printing technology can reduce the LCD color filter manufacturing cost more than 50 %. Uniform color filter patterning can be achieved only with proper ink and barrier materials. We developed new ink and black matrix materials for inkjet color filter. The ink materials have low volatility while they have very high solid content. The black matrix materials have very precisely controlled surface energy so that the inks can fill the pixels evenly and completely. We controlled the ink drop volume and ink material to minimize the thickness difference between the black matrix and the color pixel. Micron-order jetting position accuracy was achieved. We successfully printed 14.1" color filters using our ink and black matrix materials.