• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.453-457
• /
• 2021

Lithium-sulfur (Li-S) batteries are one of attractive energy conversion and storage system based on high theoretical specific capacity and energy density with low costs. However, volatile nature of elemental sulfur is one of critical problem for their practical acceptance in industry because it considerably affects electrode uniformity during electrode manufacturing. In this work, polymeric sulfur composite consisting of ionic liquid (IL) are suggested to reduce volatility nature of elemental sulfur, resulting in better processibility of the Li-S cell. According to systematic spectroscopic analysis, it is found that polymeric sulfur is consisting of repeating units combining with elemental sulfur and volatility of them is negligible even at high temperature. In addition, the IL-embedded polymeric sulfur shows moderate cycle performance compared to the cell with elemental sulfur. From these results, it is found that the IL-embedded polymeric sulfur composite is applicable cathode candidate for the Li-S cell based on their excellent non-volatility as well as their superior electrochemical performance.

• 통상정보연구
• /
• 제15권2호
• /
• pp.163-185
• /
• 2013

본 논문은 한국항공주식회사 분사기업과 비분사기업의 구별에 따른 한국 항공 중소기업들이 개방형혁신 특성을 개별사례를 중심으로 분석하고 있다. 한국항공주식회사 분사기업 여부에 따른 항공 중소기업들의 개방형 혁신 특성이 차이가 나는가? 그렇다면 구체적으로 어떠한 차이가 존재하는가? 하는 연구문제에 대한 답을 구하고 있다. 특히 한국 항공산업 클러스터의 대표지역인 사천지역의 항공 중소기업들에 대한 심층 인터뷰를 통해서 연구문제에 대한 답을 구한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1230-1238
• /
• 2010

국내 조선기자재산업은 1990년대 이후 국내 조선산업의 성장에 힘입어 지속적으로 성장하였다. 그러나 최근 중국 등 후발조선국의 조선산업 육성에 따라 조선기자재의 신흥시장으로 부상하고 있다. 또한 최근 국내 조선산업의 시장점유율이 35% 내외로 다량의 선박을 건조하였기 때문에 이들 선박에 대한 잠재적인 A/S수요가 막대하다. 그러므로 향후 이들 신흥시장의 선점과 글로벌A/S수요를 통한 직수출을 확대하기 위해서는 글로벌A/S시스템의 구축이 절실하다. 최근 부산 녹산산단에 업계 공동으로 조선기자 재글로벌지원센터를 설립하였으나 구체적인 운영방안을 마련 중에 있다. 이에 본 연구에서는 최근 조선기자재의 A/S수요특성과 메카니즘을 알아보고, 국내 조선기자재산업의 직수출 확대를 촉진하기 위한 효율적인 글로벌A/S시스템을 제안하고, 자립운영을 위한 비즈니스 모델 개발하여 제시하였다.

• 센서학회지
• /
• 제32권3호
• /
• pp.169-173
• /
• 2023

With the increasing concern of global warming caused by greenhouse gases owing to the recent industrial development, there is a growing need for advanced technology to control these emissions. Among the various greenhouse gases, nitrogen dioxide (NO₂) is a major contributor to global warming and is mainly released from sources, such as automobile exhaust and factories. Although semiconductor-type NO₂ gas sensors, such as SnO₂, have been extensively studied, they often require high operating temperatures and complicated manufacturing processes, while lacking selectivity, resulting in inaccurate measurements of NO₂ gas levels. To address these limitations, a novel sensor using PbS quantum dots (QDs) was developed, which operates at low temperatures and exhibits high selectivity toward NO₂ gas owing to its strong oxidation reaction. Furthermore, the use of P3HT conductive polymer improved the thin film quality, reactivity, and reaction rate of the sensor. The sensor demonstrated the ability to accurately measure NO₂ gas concentrations ranging from 500 to 100 ppm, with a 5.1 times higher sensitivity, 1.5 times higher response rate, and 1.15 times higher recovery rate compared with sensors without P3HT.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.379-381
• /
• 2009

In designing full vehicle, crash safety, fuel efficiency, exhaust gas, and driving stability are very important factors. Especially, automotive wheel which supports total vehicle weight is a critical component in view of driving stability. Most of automotive wheel have been manufactured for beautiful appearance by using aluminum alloy in domestic industry. However, the amount of automotive steel wheel used are on an increasing trend according to developing the advanced high strength steel with good formability property recently. In this study, the circumferential deviation of rim with various thickness and yield strength was investigated. The formability evaluation of the rim was developed by using a finite element module furnished by Forge software.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.82-88
• /
• 2020

In the face of recent digital and digital transformation, companies and industries are trying to be agile to adapt and respond to change. Agile paradigm is spreading beyond the boundaries of existing applications such as IT-related projects and software development. In this regard, this study, we analyzed the diffusion of agile paradigm by text mining abstracts of research papers from 2001 to 2019. In addition, we discussed agile transformation in the Fourth Industrial Revolution. Through this study, we confirmed that we are studying agile transformation in various fields such as business environment, corporate organizational culture, manufacturing industry, and supply chain. The results of this study will contribute to understanding the meaning and role of agile as a basic paradigm for digital transformation in the Fourth Industrial Revolution.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.624-632
• /
• 2003

In the gasoline engine industry. there has been a trend towards the development of high performance engines with improved fuel efficiency, reduced weight and smaller sizes. These trends help to solved engine problems related to thermal load and abnormal combustion. In order to investigate these Problems, a thin film-type probe for instantaneously measuring temperatures has been suggested. A method for manufacturing such a probe was established in this study. The instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and the heat flux was obtained through Fourier analysis. A peak instantaneous temperature was obtained after 55∼60 ms from ignition and the temperature increased according to an equivalence ratio and varied differently according to the position of the probe. Total heat loss during combustion period was affected by the equivalence ratio and differed widely in accordance to the position of the probe.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.17-22
• /
• 2008

Recently, the demand of high-productivity injection mold increases since the consumption of packaging grows in the world. Stack mold is composed of more than two molds and it has very high productivity and economic efficiency. In advanced country, stack mold which has was developed already but, in occasion of domestic mold industry, there is no study of stack mold. In this study, die and mold of in-mold labeling was developed for securing the technique of manufacturing high-productivity mold.

• 한국전자거래학회지
• /
• 제1권1호
• /
• pp.69-92
• /
• 1996

An Integrated Data Environment (IDE) is the end state of the CALS vision. It refers to an environment where all the data generated from the entire lifecycle activities of a product can be shared by anyone that participates in the management. engineering, manufacturing, or support of the product, although the data are geographically distributed and are maintained in heterogeneous platforms. The primary purpose of this paper is to introduce the fundamental concept, architecture, and core implementation technology of an IDE. The secondary purpose is to suggest some strategic directions to the planning staffs in both government and industry. and to suggest some research issues to the researchers in academia. The reference architecture of an IDE being developed by the US DoD and that of NIIIP (National Industrial Information Infrastructure Protocol) being developed by a consortium are discussed. Two principal issues of implementing an integrated database, i.e., distributed object computing including CORBA and multi-database system (MDBS) are reviewed. As a conclusion. the author suggests that daring investment in prototyping an IDE by a nationwide consortium is essential to keep up with the advanced countries in CALS implementation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.49-55
• /
• 2000

The semiconductor industry relies on digital optical imaging for the overlay metrology of integrated circuit patterns. One critical performance demand in the particular application of digital imaging is placed on the edge resolution that is defined as the smallest detectable displacement of an edge from its image acquired in digital from. As the critical feature size of integrated circuit patterns reaches below 0.35 micrometers, the edge resolution is required to be less than 0.01 micrometers. This requirement is so stringent that fundamental behaviors of digital optical imaging need to be explored especially for the precision coordinate metrology. Our investigation reveals that the edge resolution shows quasi-random characteristics, not being simply deduced from relevant opto-electronic system parameters. Hence, a stochastic upper bound analysis is made to come up with the worst edge resolution that can statistically well predict actual indeterminate edge resolutions obtained with high magnification microscope objectives.