다공성 멤브레인 필터를 템플레이트로 이용하여 전도성 고분자를 중합하면 템플레이트의 형태대로 나노 또는 마이크로 사이즈의 전도성 고분자 구조물을 얻을 수 있다. 본 연구에서는 전기화학 중합법을 템플레이트 합성 과정에 이용하여 전극에 고착된 전도성 고분자 미세 구조물을 얻었다. 이 전기화학 템플레이트 합성 방법에서의 관건은 플라스틱 템플레이트를 ITO 또는 금속 전극위에 부착시키는 일이다, 이 때 전극은 전기화학 특성을 보지하여야 한다 이를 위하여 PEDiTT(poly-3,4-ethylenedithiathiophene) 용액과 PVA (polyvinyl alcohol) 용액을 블랜딩히여 얻은 복합체(composite)를 접착제로 이용하여 다공성 멤브레인 필터를 전극에 부착시켜 템플레이트 전극을 제작하였다. 이 전극을 피롤농도가 0.5M인 중합용액에 넣은 후 전해반응으로 템플레이트의 기공 안으로 폴리피롤이 합성되도록 하였다. 폴리피를 형성여부를 확인하기 위하여 템플레이트의 제거 전과 후의 전극 모습을 SEM이미지로 얻어서 확인하였다 또한 순환전압전류댑으로 전류 곡선을 얻어 확인하였다. 비교적 면적이 큰 작업 전극과 매우 작은 미소전극을 상대전극으로 구성한 전해 중합계를 이용하여 큰 작업 전극의 국소 부분에만 전도성 고분자의 전해중합을 시도하였다. 이를 위하여 마이크로 크기의 전극을 상대전극(Counter Electrode)으로, 그리고 템플레이트가 부착된 전극을 작업 전극(Working Electrode)으로 하는 2전극계를 구성하여 이용하였다. 이 전해계를 이용하여 얻은 미세구조물은 템플레이트의 동공 크기와 같은 크기로 성장하였고 형태는 튜브나 막대기 형태를 보였다. 특히 상대전극의 위치를 조정하여 원하는 위치에 튜브형태의 미세구조물을 합성하였다. 최종 합성조건으로는 $250{\mu}m$ 전극은 인가전위 4V로 100초간 중합시간, 그리고 $10{\mu}m$전극의 경우는 인가 전위 6V에 시간은 30초 동안 중합할 때 고분자가 멤브레인 동공 밖으로 넘쳐나지 않는 만큼 성장함을 알았다.
자동화 시스템이 일반화되면서 제품 관리를 위한 라벨지(label)의 수요는 증가하고 있으며, 다양한 환경에서 사용할 수 있는 기능성 라벨지 개발이 빠르게 진행되고 있다. 인쇄회로기판의 경우 제작 과정에서 $300^{\circ}C$ 이상의 리플로우 솔더링 공정과 여러 차례의 세정 공정을 거치기 때문에 열적 화학적 안정성을 갖는 바코드 라벨지(barcode label)가 사용되고 있으나 황변(yellowing) 현상 발생으로 인한 인식률 저하의 문제가 발생하고 있다. 본 연구에서는 실리카 무기 바인더와 이산화티탄 백색안료를 사용한 복합 코팅층을 개발하고, 열적 화학적 안정성을 확보한 기능성 라벨지 연구를 진행하였다. 졸-겔 공정으로 제조한 실리카 무기 바인더는 기재(substrate)로 사용하는 폴리이미드 필름과 우수한 밀착성과 내마모성 특성을 갖는 것으로 확인하였다. 또한 이산화티탄 백색안료와 혼합하여 폴리이미드 필름에 백색의 코팅층을 제조할 수 있었으며, 복합 코팅층은 $400^{\circ}C$ 이상의 고온에서도 우수한 백색도와 광택도를 특성을 유지하는 것을 알 수 있었다. 또한 산성(pH 1.6)과 염기성(pH 13.6) 세정제를 통한 화학 처리 후에도 백색도와 광택도 변화가 일어나지 않는 우수한 화학적 안정성을 확인하였다.
본 연구에서는 염산처리에 의하여 표면 개질된 활성탄소 섬유에 TNB (titanium n-butoxide) 용액을 침투시켜 $ACF/TiO_2$ 광촉매를 제조하였다. 염산 처리에 의하여 표면 기능기가 증가된 다공성 탄소에 형성된 $TiO_2$의 특성화에 연구의 관점을 두었다. TNB가 $TiO_2$로 변화되는 산처리 효과는 $ACF/TiO_2$ 광촉매제조에 상당히 중요한 요소임을 확인하였다. 표면 특성분석 결과로부터, BET 비표면적과 전체 동공부피는 산처리 양이 증가함에 따라 표면의 이산화티탄 화합물 형성과 함께 감소함을 나타내었다. 염산처리에 의해 형성된 $ACF/TiO_2$ 계에 대한 X-선 회절 변화로부터, 염산을 처리하지 않은 FT와 0.05, 0.1 M 처리된 FT1, FT2의 3가지 시료의 경우, 주요한 회절선의 피크는 아나타제의 결정상을 나타내었으며, 0.5M 처리된 FT3의 경우 아나타제와 루타일의 두 가지 형상이 나타났다. SEM 결과로부터, 전처리 하기전과 후에 활성탄소섬유 주변에 형성된 화합물들의 분포가 현저하게 다름을 알 수 있었으며, 이러한 현상은 산처리 효과의 우수성을 설명하고 있다. EDX 결과에 의하면, 모든 시료의 스펙트럼은 C, Ti와 O의 피크가 주요한 특징적 피크로 크게 나타났음을 보여 주고 있다. 마지막으로 MB (methylene blue)의 제거 효율에 근거하여, MB 농도 감소는 활성탄소섬유의 흡착효과와 $TiO_2$의 우수한 광분해 효과에 대한 두 가지 복합적인 결과로 설명할 수 있다.
유기재료(organic material)는 위성이나 우주비행체의 열을 조절하고 우주환경에 직접 노출되는 것을 차단하기 위하여 가장 흔하게 사용되는 재료 중 하나이다. 본 논문에서는 지상설비를 이용하여 모사한 우주환경에서 유기재료의 물성변화를 관찰하였다. 대표적인 위성용 유기 열조절 재료 중 하나인 2mil ITO(Indium Tin Oxide) coated aluminized KAPTON을 실험 대상으로 선택하였다. 양성자에 의한 단일 우주환경효과를 실험하기 위하여, 한국 원자력의학원의 MC-50 싸이클로트론(cyclotron)을 이용하여 양성자를 조사(irradiation)하였으며, 조사조건은 지구궤도 주변 최고의 양성자 발생기록인 1972년 8월의 최고치 상황을 적용하였다. 조사에너지는 평균 관측에너지인 30MeV으로 고정하였으며, 등가 조사량은 우주노출 시간 1년, 3년, 5년 및 10년을 기준으로 설정하였다. 분석과정은 인장강도를 측정하여 정량적 물성저하를 확인하였고, 전계방출 전자주사현미경 등으로 결정성변화와 노출표면의 손상을 분석하였다.
이차원 구조의 탄소 결합체인 그래핀은 뛰어난 물리적, 화학적 특성으로 인해 미래 전자 소자의 소재로 크게 각광을 받고 있는 물질이다. 따라서, 소자에서 사용된 기판이 그래핀의 물리적 특성에 끼치는 영향에 대한 이해는 그래핀의 응용에 있어서 필수적이며, 그에 대한 연구를 수행하였다. 니켈 (111)과 (100) 결정면에서 각각 성장한 그래핀과 니켈 기판의 상호작용에 대한 연구를 수행함과 동시에, 산화규소 기판으로 전사한 후, 기판과 그래핀과의 상호작용을 라만 분광법을 이용하여 연구하였다. 니켈 기판에서 성장한 그래핀은 기판의 면 방향과 상관없이 기판으로부터 전하의 이동에 따른 도핑효과는 발견되지 않았으며, 산화규소 기판 또한 도핑효과는 없었다. 니켈 기판과 그래핀 사이의 결합력이 그래핀과 산화규소 기판과의 결합력합보다 더 큰 것으로 분석이 되었으며, 니켈에서 성장한 그래핀은 기판의 영향을 받아 수축되어 있었고, 니켈 (100) 면에서는 그래핀이 엇맞음 성장하였음을 확인하였다. 마지막으로, 니켈 (111), (100) 면에서 성장한 그래핀을 산화 규소 기판으로 전사하면 서로 다른 파수 값에서 2D band의 픽이 관측되었다.
This paper reports the trends of researches and technologies of electronic packaging using graphene. Electronic packaging is to provide the signal and electrical current among electronic components, to remove the heat in electronic systems or components, to protect and support the electronic components from external environment. As the required functions and performances of electronic systems or components increase, the electronic packaging has been intensively attracted attention. Therefore, technologies such as miniaturization, high density, Pb-free material, high reliability, heat dissipation and so on, are required in electronic packaging. Recently, graphene, which is a single two-dimensional layer of carbon atoms, has been extensively investigated because of its superior mechanical, electrical and thermal properties. Until now, many studies have been reported the applications using graphene such as flexible display, electrode, super capacitor, composite materials and so on. In this paper, we will introduce and discuss various studies on recent technologies of electronic packaging using graphene for solving the required issues.
Red phosphor in glasses (PiGs) for automotive light-emitting diode (LED) applications were fabricated with 620-nm $CaAlSiN_3:Eu^{2+}$ phosphor and Pb-free silicate glass. PiGs were synthesized and mounted on high-power blue LED to make a monochromatic red LED. PiGs were simple mixtures of red phosphor and transparent glass powder. After being fabricated with uniaxial press and CIP at 300 MPa for 20 min, the green bodies were thermally treated at $550^{\circ}C$ for 30 min to produce high dense PiGs. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30% phosphor had a full sintered density. Changes in photoluminescence spectra and color coordination were studied by varying the thickness of plates that were mounted after optical polishing. As a result of the optical spectrum and color coordinates, PiG plate with $210{\mu}m$ thickness showed a color purity of 99.7%. In order to evaluate the thermal stability, the thermal quenching characteristics were measured at temperatures of $30{\sim}150^{\circ}C$. The results showed that the red PIG plates were 30% more thermally stable compared to the AlGaInP red chip.
Park, Chan;Yoo, Seung-Hwan;Park, Sang-Won;Yun, Kwi-Dug;Ji, Min-Kyung;Shin, Jin-Ho;Lim, Hyun-Pil
The Journal of Advanced Prosthodontics
/
제9권2호
/
pp.118-123
/
2017
PURPOSE. To investigate the effect of non-thermal atmospheric pressure plasma (NTAPP) treatment on shear bond strength (SBS) between resin cement and colored zirconia made with metal chlorides. MATERIALS AND METHODS. 60 zirconia specimens were divided into 3 groups using coloring liquid. Each group was divided again into 2 sub-groups using plasma treatment; the experimental group was treated with plasma, and the control group was untreated. The sub-groups were: N (non-colored), C (0.1 wt% aqueous chromium chloride solution), M (0.1 wt% aqueous molybdenum chloride solution), NP (non-colored with plasma), CP (0.1 wt% aqueous chromium chloride solution with plasma), and MP (0.1 wt% aqueous molybdenum chloride solution with plasma). Composite resin cylinders were bonded to zirconia specimens with MDP-based resin cement, and SBS was measured using a universal testing machine. All data was analyzed statistically using a 2-way ANOVA test and a Tukey test. RESULTS. SBS significantly increased when specimens were treated with NTAPP regardless of coloring (P<.001). Colored zirconia containing molybdenum showed the highest value of SBS, regardless of NTAPP. The molybdenum group showed the highest SBS, whereas the chromium group showed the lowest. CONCLUSION. NTAPP may increase the SBS of colored zirconia and resin cement. The NTAPP effect on SBS is not influenced by the presence of zirconia coloring.
Turker, Sebnem Begum;Alkumru, Hasan Necdet;Akalin, Buket
The Journal of Advanced Prosthodontics
/
제8권2호
/
pp.158-166
/
2016
PURPOSE. The aim of this study was to determine the fracture resistance and the mode of fracture of endodontically treated teeth restored with different fiber posts and all-ceramic crowns. MATERIALS AND METHODS. Two glass fiber reinforced post systems in two different sizes and polyethylene fiber ribbon in two different thicknesses (n=10) were used. The specimens, restored with all-ceramic crowns, were subjected to a compressive load (in N) delivered at a 130-degree angle to the long axis until a fracture could be noted. The results were analyzed statistically with a One-Way ANOVA test (P<.05). RESULTS. Statistically significant differences were observed between the mean fracture resistance values of Postec, Snowlight, and Kerr Connect thin specimens (P<.0095). The Postec results (395.70 N) were found to be significantly higher than the others. No statistical difference was observed among the thick specimens (P<.2657). The mean fracture resistance values of the Snowlight thick samples were found to be higher than those of the Snowlight thin samples. The specimens were always fractured around the cemento-enamel junction at the palatinal side. No post fracture was observed for the thin Snowlight and Kerr Connect specimens or for the thick Postec and Kerr Connect specimens. Among the common failure types of the specimens, the worst was observed to be the root fracture failure. The highest post dislodgement failure result (80%) was obtained from the thin Kerr Connect specimen. CONCLUSION. In terms of optimizing fracture resistance, the fiber post size selection should be done according to the forces applied to the restored teeth.
Micron-sized metal wires are widely used in industries such as filtration, catalyst and composite materials, etc. In the wire drawing process, the die that is used conventionally is an effective and, at the same time, sensitive component. However, a typical array of the dies has caused many problems in the wire drawing process, e.g., large frictional force on the interface between wire and the resulting high heat generation, precise adjustment of the dies, extended cooling system, die abrasion, etc.. Because of these problems, there have been many works that are aiming at improving the efficiency of wire drawing process by analyzing the die geometry and by applying advanced die material to prolong the die life or even at developing a dieless wire drawing system. This paper is dealing with developing a new wire drawing system that is applicable to reduce the wire drawing steps with high draw ratio. The new wire drawing system does not use the dies, but use the self-induced heater that works on the basis of the resonant phenomenon of wire material. The electromagnetic wave is the heating source. The results of the study on the diameter reduction and microwave flow analysis show that the heating effectiveness of the wire is influenced by the energy distribution in the microwave propagation chamber. We can obtain diameter-reduced wires by using microwave in the dieless drawing process. Microwave as a heating source is capable of producing wires without applying dies in wire drawing process.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.