• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.23-25
• /
• 2007

The partial distortion elimination (PDE) scheme is used to decrease the sum of absolute difference (SAD) computational complexity, since the SAD calculation has been taken much potion of the video compression. In motion estimation (ME) based on PDE, it is ideal that the initial value of SAD in summing performance has large value. The traditional scan order methods have many operation time and high operational complexity because these adopted the division or multiplication. In this paper, we introduce the new scan order and search order by using only adder. We define the average value which is called to rough average value (RAVR). Which is to reduce the computational complexity and increase the operational speed and then we can obtain the improvement of SAD performance. And also this RAVR is used to decide the search order sequence, since the difference RAVR between the current block and candidate block is small then this candidate block has high probability to suitable candidate. Thus, our proposed algorithm combines above two main concepts and suffers the improving SAD performance and the easy hardware implementation methods.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.319-328
• /
• 2006

A simple approximation method for the stress intensity factor at the tip of the axial semielliptical cracks on the cylindrical vessel is developed. The approximation methods, incorporated in VINTIN (Vessel INTegrity analysis-INner flaws), utilizes the influence coefficients to calculate the stress intensity factor at the crack tip. This method has been compared with other solution methods including 3-D finite element analysis for internal pressure, cooldown, and pressurized thermal shock loading conditions. For these, 3-D finite-element analyses are performed to obtain the stress intensity factors for various surface cracks with t/R=0.1. The approximation solutions are within $\pm2.5%$ of the those of finite element analysis using symmetric model of one-forth of a vessel under pressure loading, and 1-3% higher under pressurized thermal shock condition. The analysis results confirm that the approximation method provides sufficiently accurate stress intensity factor values for the axial semi-elliptical flaws on the surface of the reactor pressure vessel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.603-610
• /
• 2008

In this paper, analytical methods for calculating the average probability of bit error of direct sequence pulse amplitude modulation ultra wideband (DS-PAM UWB) system and time hopping pulse position modulation ultra wideband (TH-PPM UWB) system are given. For the multi-user DS-PAM UWB system, the bipolar pulse amplitude modulation is used in order to achieve better performance. As we know, more attention is paid to the TH-PPM UWB systems recently. In this paper. we first introduce the accurate BER calculation methods of the multi-user DS-PAM UWB and TH-PPM UWB systems and then give the performance analysis over the ideal AWGN channel and a correlation receiver. Furthermore, we also introduce their applications in image transmission and data transmission and give the simulation results. The analytical method yields simple and exact formulas relating the performance to the system parameters.

• Nuclear Engineering and Technology
• /
• 제15권2호
• /
• pp.98-109
• /
• 1983

2차원 다군 확산 이론에 의한 원자로 동특성 방정식의 해를 구하기 위해서 two-step alternating direction explicit method를 도입하였다. Alternating direction implicit method의 특별한 경우로써 이 방법의 정확도 및 안전성을 해석하였다. 이 방법의 타당성을 시험하기 위해서 TWIGL 전산조직에 사용한 implicit difference method와 비교하여 두 방법의 결과가 일치함을 알았다. 이 방법을 이용하여 가압경수형 원자로(PWR)의 제어봉 삽입시의 중성자 신속의 시간변화와, CANDU-PHW 원자로의 가상된 냉각재상실 사고시의 중성자 신속의 시간변화를 계산하여 이들 원자로의 제어능력을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제4권1호
• /
• pp.2-22
• /
• 1980

In the earlier days, when the diesel engine was used for ship propulsion, its shaft had often been broken by uncertain causes. Bauer suggested, for the first time in 1900, that it resulted from the torsional vibration of the shaft system. From 1901 to 1902, Gumbel and Frahm found out that shaft failures were caused by the resonance of the shaft system in critical speed. Since that time, valuable theories, empirical formulae and methods of vibration analysis were introduced by many investigators such as Geiger, Holzer, Lewis, Carter, Porter, Constant, Timoshenko, Dorey, Den Hartog, Tuplin, Ker Wilson, Bradbury etc. But, as the calculation of the damping energy involves very complicated and uncertain factors, the estimated amplitude of the torsional vibration is incorrect and uncertain. Besides, as high-powered engines have been installed on large vessels or special vessels and exciting force has been increased, new problems of the torsional vibration have continuously occurred. Although we can calculate the approximate natural frequencies or estimate their amplitude and additional stress in the design stage, through the above mentioned studies, the results of the calculations are unsatisfactory, and so much time is needed to carry out the calculation by hand. The authors have developed a computer program to calculate its natural frequencies, the amplitudes and additional stresses of the torsional vibration in the marine diesel engine shafting. In developing the computer program, the authors have paid the special attention to the calculation of the damping energy. To verify the reliability of the developed computer program, the torsional vibration of several propulsion shaftings which are driven by the diesel engine has been analyzed. The results calculted by the authors' computer program show good agreements with those of the actual measurements and are better than the results of engine maker's calculation.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.446-454
• /
• 2021

Critical heat flux (CHF) has traditionally been evaluated using look-up tables or empirical correlations for nuclear power plants. However, under complex moving condition, it is necessary to reconsider the CHF characteristics since the conventional CHF prediction methods would no longer be applicable. In this paper, the additional forces caused by motions have been added to the annular film dryout (AFD) mechanistic model to investigate the effect of moving condition on CHF. Moreover, a theoretical model of the natural circulation loop with additional forces is established to reflect the natural circulation characteristics of the loop system. By coupling the system loop with the AFD mechanistic model, a CHF prediction program called NACOM for natural circulation loop under moving condition is developed. The effects of three operating conditions, namely stationary, inclination and rolling, on the CHF of the loop are then analyzed. It can be clearly seen that the moving condition has an adverse effect on the CHF in the natural circulation system. For the calculation parameters in this paper, the CHF can be reduced by 25% compared with the static value, which indicates that it is important to consider the effects of moving condition to retain adequate safety margin in subsequent thermal-hydraulic designs.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.310-323
• /
• 2023

The k-eigenvalue neutronics/thermal-hydraulics coupling calculation is a key issue for reactor design and analysis. Jacobian-free Newton-Krylov (JFNK) method, featured with super-linear convergence rate and high efficiency, has been attracting more and more attention to solve the multi-physics coupling problem. However, it may converge to the high-order eigenmode because of the multiple solutions nature of the k-eigenvalue form of multi-physics coupling issue. Based on our previous work, a modified JFNK with a line search method is proposed in this work, which can find the fundamental eigenmode together with thermal-hydraulics feedback in a wide range of initial values. In detail, the existing modified JFNK method is combined with the line search strategy, so that the intermediate iterative solution can avoid a sudden divergence and be adjusted into a convergence basin smoothly. Two simplified 2-D homogeneous reactor models, a PWR model, and an HTR model, are utilized to evaluate the performance of the newly proposed JFNK method. The results show that the performance of this proposed JFNK is more robust than the existing JFNK-based methods.

• Nuclear Engineering and Technology
• /
• 제38권1호
• /
• pp.11-32
• /
• 2006

System thermal-hydraulic codes have been used in the past decades in the areas of design, operation, licensing and safety of Nuclear Power Plants (NPPs). The development and validation of these codes have reached a high degree of maturity, through the consideration of huge experiments and advanced numerical models. Nowadays, the analyses are based upon realistic approaches rather than the conservative evaluation models. However the applications of these computational tools require preliminary qualification issues. Although huge amounts of financial and human resources have been invested for the development and improvement of codes, the calculation results are still affected by errors. In the sophisticated nuclear technology, design and safety of NPP, these errors must be quantified. An overview of the state of the art of the current thermal-hydraulic system code is developed and the need of uncertainty analysis in code calculations is emphasized. Several sources of uncertainty have been classified and commented, and typical applications of such methods are shown.

• 한국측량학회지
• /
• 제20권1호
• /
• pp.85-92
• /
• 2002

건설시공현장에서 토공량 결정은 전체공사비 중에 큰 비중을 차지하므로 정확한 계산방법이 있어야 한다. 토공량을 계산하는 현행방법은 격자점 사이의 횡단면의 간격을 선형(사다리꼴법칙)이나 비선형(심프슨법칙)으로 가정한다. 일반적으로 비선형법칙이 선형법칙보다 더 정확한 것으로 나타나 있다. 그러나 앞에서 언급된 모든 방법은 예리한 코너부분이나 두 점 사이의 갑작스런 지형변화에 대처할 수 없는 결점을 내포하고 있다. 본 논문에서는 B-스플라인을 이용하여 주어진 데이터를 지나는 스플라인 곡면을 구하는 알고리즘을 살펴보고, 스플라인 곡면을 이용하여 토공량을 근사적으로 구하는 방법을 제시한다. 스플라인 곡면을 이용한 방법이 Chen 과 Lin이 제시한 방법보다 더 정확함을 몇 가지 예를 통해 보인다.

• 대한전자공학회논문지SD
• /
• 제42권4호
• /
• pp.61-68
• /
• 2005

MPEG-2 오디오 압축방식인 AAC(Advanced Audio Coding) LC(Low Complexity) 스테레오 부호화기를 고속으로 구현할 수 있는 칩을 32비트 DSP 코어를 기반으로 설계하고 0.25um CMOS 기술을 이용하여 제작하였다. 계산량과 메모리 용량을 줄이기 위하여 알고리즘 구현방법 측면에서 최적화를 하였으며, FFT(Fast Fourier Transform)를 하드웨어로 구현하여 고속화하였다. 제작된 칩의 크기는 $7.20\times7.20 mm^2$ 이었으며 등가 게이트는 약 830,000 이었으며 70MIPS 이내에서 AAC 부호화를 할 수 있음을 확인하였다.