• 제목/요약/키워드: Adsorption behaviour

검색결과 39건 처리시간 0.025초

Influence of Ca-Na-Cl physicochemical solution properties on the adsorption of Se(-II) onto granite and MX-80 bentonite

  • Joshua Racette ;Andrew Walker ;Shinya Nagasaki ;Tianxiao Tammy Yang ;Takumi Saito ;Peter Vilks
    • Nuclear Engineering and Technology
    • /
    • 제55권10호
    • /
    • pp.3831-3843
    • /
    • 2023
  • The adsorption behaviour of Se(-II) onto granite and MX-80 bentonite in Ca-Na-Cl solutions has been studied utilizing adsorption experiments and surface complexation modelling. Adsorption kinetic experiments allude to steady-state adsorption periods after 7 days for granite and 14 days for MX-80 bentonite. Batch adsorption experiments were carried out to determine the influence that the physicochemical solution properties would have on Se(-II) adsorption behaviour. Adsorption of Se(-II) onto granite and MX-80 bentonite follows the trend of anionic adsorption, with a decrease in Rd values as the solution pH increased. There is also an ionic strength influence on the adsorption of Se(-II) onto granite with a decrease in the Rd value as the ionic strength increased. This effect is not found when observing Se(-II) adsorption onto MX-80 bentonite. Final experiments with a representative groundwater, determined that the adsorption of Se(-II) onto granite and MX-80 bentonite returned Rd values of (1.80 ± 0.10) m3·kg-1 and (0.47 ± 0.38) m3·kg-1, respectively. In support of the experiments, a surface complexation modelling approach has been employed to simulate the adsorption of Se(-II) onto granite and MX-80 bentonite, where it was determined that two different surface complexes, ≡S_Se- and ≡SOH2+_H2 were capable of simulating Se(-II) adsorption behaviour.

The Effect of Temperature on the Corrosion of Mild Steel in H3PO4 Containing Halides and Sulfate Ions

  • Chandrasekaran, V.;Kannan, K.;Natesan, M.
    • Corrosion Science and Technology
    • /
    • 제4권1호
    • /
    • pp.8-14
    • /
    • 2005
  • The corrosion behaviour of mild steel in phosphoric acid solution in the presence and absence of pollutants viz. Chloride, Fluoride and Sulfate ions at 302K-333K was studied using mass loss and potentiostatic polarization methods. The addition of chloride and sulfate ions inhibits the mild steel corrosion in phosphoric acid while fluoride ions stimulate it. The effect of temperature on the corrosion behaviour of mild steel indicated that inhibition of chloride and sulfate ions decreased with increasing temperature. The adsorption of these ions (Chloride and sulfate) on the mild steel surface in acid has been found to obey Langmuir adsorption isotherm. The values of activation energy (Ea) and free energy of adsorption ($\Delta$) indicated physical adsorption of these ions (chloride and sulfate) on the mild steel surface. The plot of $logW_{f}$ against time (days) at 302K gives a straight line, which suggested that it obeys first order kinetics and also calculate the rate constant k and half-life time $t_{1/2}$.

카올리나이트에 대한 휴믹산 및 아메리슘 흡착거동 연구 (A Study of Adsorption Behaviour of Humic Acid and Americium on the Kaolinite)

  • 이명호;이규환;박경균;정의창;송규석;신현상
    • 방사성폐기물학회지
    • /
    • 제8권2호
    • /
    • pp.107-113
    • /
    • 2010
  • 본 연구에서는 pH 변화에 따른 카올리나이트-휴믹산, 카올리나이트-아메리슘 및 휴믹산-아메리슘 등의 이성분계 흡착반응을 조사하였다. 카올리나이트의 물리화학적 특성을 조사한 후, 휴믹산농도, 이온강도 및 pH 변화에 따른 카올리나이트에 휴믹산의 흡착실험을 하였다. pH 및 HA 농도가 증가함에 따라 KA에 대한 HA의 흡착율이 감소하였으나, 이온강도가 증가함에 따라 HA의 흡착율이 증가하였다. 또한 pH 변화에 따른 카올리나이트와 아메리슘과 흡착반응 및 아메리슘과 휴믹산과의 흡착반응도 연구하였다. 산성 및 중성영역에서는 Am이 HA에 쉽게 흡착되었으나, 염기성 영역에서는 정전기적 반발력으로 HA에 대한 Am 흡착이 감소되었다. 본 연구 결과는 수환경에서 휴믹산에 의한 아메리슘 흡착거동 특성을 이해하는데 활용이 가능하다.

Studies on Pyrolysis Behaviour of Banana Stem as Precursor for Porous Carbons

  • Manocha, Satish;Bhagat, Jignesh H.;Manocha, Lalit M.
    • Carbon letters
    • /
    • 제2권2호
    • /
    • pp.91-98
    • /
    • 2001
  • Porous carbons have been prepared from different parts of banana stems using two different routes, viz., by pyrolysing the mass at different temperatures as well as by treating the dried mass with chemicals followed by pyrolysis. The pyrolysis behaviour of all these materials has been studied up to $1000^{\circ}C$. Samples treated with acids exhibit more increase in surface area as compared to those treated with alkalies or salts. Analysis of BET surface area shows that the carbon prepared at low temperature shows mixed porosity, i.e., micro and mesopores. Samples heated to high temperature above $700^{\circ}C$ show decrease in macroporosity and increase in microporosity. Liquid adsorption studies have been made using methylene blue and heavy oil. The activated carbons so prepared exhibit higher oil adsorption mainly in the macro and mesopores.

  • PDF

아민화 PP-g-AAc 초극세 이온교환섬유의 산성가스(SOx, NOx) 흡착거동 (Behaviour of Acidic Gases(SOx, NOx) Adsorption on Aminated PP-g-AAc Ultrafine Fibrous Ion Exchanger)

  • 최용재;최국종;이창수;황택성
    • 폴리머
    • /
    • 제33권1호
    • /
    • pp.72-78
    • /
    • 2009
  • 본 연구는 아민화 polypropylene grafted acrylic acid(이하 PF-g-AAc로 표기) 초극세 이온교환섬유의 $SO_2$, $NO_2$에 대한 흡착거동을 고찰하였다. $SO_2$에 대한 흡착량은 초기농도가 높을수록 증가하였으며 농도가 낮을수록 흡착파과 시간이 짧아졌다. 흡착파과 평형은 60분 이내에 일어났으며 초기농도 100 ppm 이하에서는 약 80%정도 흡착이 이루어졌고, $SO_2$ 농도 100 ppm 이상에서 90% 이상 흡착되었다. $NO_2$의 흡착량은 $SO_2$에 비해 낮은 선택흡착성을 나타내었다. 한편, 유속이 증가함에 따라 $SO_2$의 흡착률은 낮아졌으며 60분 이내에 흡착파과 평형에 도달하였고, $NO_2$의 흡착량은 60%로 $SO_2$에 비해 낮았다. 함수율 250 mL/g에서 $SO_2$의 흡착량은 92%이었다. 아민화 PP-g-AAc 초극세 이온교환섬유의 $SO_2$등온흡착모델은 Freundlich 모델보다 Langmuir 모델에 근접하였다.

Breakthrough behaviour of activated charcoal cloth samples against oxygen analogue of sulphur mustard

  • Prasad, G.K.;Kumar, J. Praveen;Ramacharyulu, P.V.R.K.;Singh, Beer
    • Carbon letters
    • /
    • 제16권1호
    • /
    • pp.19-24
    • /
    • 2015
  • The breakthrough behaviour of activated charcoal cloth samples against an oxygen analogue (OA) of sulphur mustard has been studied using the modified Wheeler equation. Activated charcoal cloth samples having different surface area values in the range of 481 to $1290m^2/g$ were used for this purpose. Breakthrough behaviour was found to depend on the properties of the activated charcoal cloth, properties of the OA and the adsorption conditions. Activated charcoal cloth with a high surface area of $1290m^2/g$, relatively large surface density of $160g/m^2$ and coarser fiber structure exhibited better kinetic saturation capacity value, 0.19 g/g, against OA vapours when compared to others, thus confirming its potential use in foldable masks for protection against chemical warfare agents.

Development of microporous activated carbon using a polymer blend technique and its behavior towards methylene blue adsorption

  • Manocha, S.;Brahmbhatt, Amit
    • Carbon letters
    • /
    • 제12권2호
    • /
    • pp.85-89
    • /
    • 2011
  • Coloured wastewater is released as a direct result of the production of dyes as well as from various other chemical industries. Many dyes and their breakdown products may be toxic for living organisms. Activated carbon is one of the best materials for removal of dyes from aqueous solutions. The present study describes the adsorption behaviour of methylene blue dye on three microporous activated carbons, where two samples (AC-1 and AC-2) were prepared by a polymer blend technique and the other is a microporous activated carbon (ARY-3) sample from viscose rayon yarn prepared by chemical-physical activation. The effects of contact time and activated carbon dosage on decolourisation capacity have been studied. The results show that activated carbon having mixed microporosity and mesoporosity show tremendous decolourisation capacity for methylene blue. In addition, the activated carbon in the powder form prepared by the polymer blend technique shows better decolourisation capacity for methylene blue than the activated rayon yarn sample.

Adsorption behaviour of film-forming amine on pre-oxidized carbon steel surface

  • Genxian, Lin;Yun, Sun;Canshuai, Liu;Jun, Fang;Lijun, Song;Bin, Liu
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1185-1194
    • /
    • 2022
  • The maintenance of condenser main pipe is the key to achieve film-forming amine maintenance effectiveness. In this work, oxygen content, pH and temperature of the solution were controlled to simulate the condition of condenser main pipe, and magnetite coated carbon steel sample was prepared by pre-oxidization. CAM was used to characterize the hydrophobicity of film formed samples. Hydrophobic film was formed on pre-oxidized carbon steel samples when octadecylamine concentration reaches 20 mg/kg. SEM, EDS, EIS, and PD were used to characterize the influence of octadecylamine concentration on maintenance effectiveness. It was found that the maintenance effectiveness was enhanced and the corrosion rate was suppressed with the increase of octadecylamine concentration. FIB and TEM were used to detect the adsorbed octadecylamine film thickness founding that octadecylamine adsorbed onto the surface of pre-oxidized carbon steel by multi-layer adsorption mechanism.

광조사 중합법에 의해 합성된 PP-g-AA와 PP-g-St 부직포의 암모니아성 질소 흡착특성 비교 (Ammonium Adsorption Property of Acrylic Acid and Styren Grafting Polypropylene Non-Woven Fabric Synthesized by Photo-induced Polymerization)

  • 박현주;나춘기
    • 한국환경과학회지
    • /
    • 제17권11호
    • /
    • pp.1255-1263
    • /
    • 2008
  • The efficiency of PP-g-AA and PP-g-St nonwoven fabric synthesized by photoinduced polymerization as an adsorbent for removal $NH_3-N$ from waste water was evaluated. The results evidently indicate that the adsorption capacities of $NH_3-N$ onto PP-g-AA nonwoven fabric were extremely superior to those onto sulfonated PP-g-St nonwoven fabric, PK and zeolite. PP-g-AA nonwoven fabric showed the maximum adsorption capacity of $NH_3-N$ at the degree of grafting of 80 wt.%. The adsorption behaviour of $NH_3-N$ onto PP-g-AA and sulfonated PP-g-St nonwoven fabric was controlled by an ion exchange reaction, and tended to be similar to both trends of Langmiur and Freundlish isotherm. Futhermore, PP-g-AA non-woven fabric could be regenerated more than 5 times by a simple washing with 0.1N HCl with no decrease of adsorption capacity and no degradation of physical properties. Also sulfonated PP-g-St nonwoven fabric could be regenerated by washing with 0.1N ${H_2}{O_4}$. However, their regeneration efficiency was significantly low because grafting layer acted as functional radical for adsorption was continuously desquamated in the adsorption or regeneration processes, which resulted in decrease of adsorption capacity and weight of adsorbent. All results obtained from this study indicate that the $NH_3-N$ removal capacity of PP-g-AA non-woven fabric was extremely superior to those of PP-g-St non-woven fabric, PK and zeolite.