• 제목/요약/키워드: Adsorbed uranium

검색결과 24건 처리시간 0.019초

Uranium(Ⅵ)-Cupferron 착물의 네모파 전압전류법적 연구 (Square-Wave Voltammetric Study of Uranium(Ⅵ)-Cupferron Complex)

  • 손세철;서무열;엄태윤;최인규
    • 대한화학회지
    • /
    • 제38권3호
    • /
    • pp.234-240
    • /
    • 1994
  • uranium(VI)-cupferron 착물에 대한 네모파 전압전류법적 연구를 pH5.0의 0.1M아세트산 완충용액에서 수행하였다. 네모파 전압전류법을 이용한 미량의 우라늄 정량과 분석시의 최적조건에 대해 검토하였다. Uranium(VI)-cupferron 착물의 환원반응은 반응물만이 전극 표면에 흡착되는 비가역적인 과정으로 진행되는 반응임을 알 수 있었다. Uranium(VI)의 검출한계는 -0.1 V vs. Ag/AgCl에서 흡착시간을 30sec로 하였을 때 7.9nM(2 ppb)이었으며, 전극 표면에 흡착된 uranium(VI)-cupferron착물의 양은 ${\Gamma}_{max} = (4.9{\pm}0.3){\times}10^{-10} mol{\cdot}cm^{-2}$이었다

  • PDF

이온 교환수지를 이용한 우라늄(VI) 이온의 흡착에 관한 연구 (A Study on the Adsorption of Uranium(VI) Ion Using Ion Exchange Resin)

  • 강영식;김준태
    • 환경위생공학
    • /
    • 제15권4호
    • /
    • pp.114-122
    • /
    • 2000
  • Several new ion exchange resins have been synthesized from chloromethyl styrene-1,4-divinylbenzine with 1%, 2%, 5% and 105-crosslink and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of uranium ion by this resins were studied. The resins were very stable in both acidic and basic media and have good resistance to heat at $300^{\circ}C$. The uranium ion are not adsorbed on the resins below pH 3.0, but the power of adsorption of it increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of uranium ion was two hours and adsorptive power decreased in proportion to crosslink size of the resins and order of dielectric constants of solvents used and the adsorption for uranium ion was bin the order of $OdienNtn-H_4$ > $OtnNen-H_4$ > $OtnNen-H_4$ > $OenNen-H_4$.

  • PDF

우라늄의 분리 및 회수에 관한 연구 (A study on the separation and recovery of uranium)

  • 노기환;김준태
    • 환경위생공학
    • /
    • 제12권1호
    • /
    • pp.15-23
    • /
    • 1997
  • The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

  • PDF

OenNtn-스틸렌-DVB 수지를 이용한 우라늄(VI) 이온의 흡착 (Adsorption of Uranium Ion Utilizing OenNtn-Styrene-DVB Resin)

  • 김준태;노기환;강영식
    • 환경위생공학
    • /
    • 제18권2호
    • /
    • pp.9-15
    • /
    • 2003
  • Resins have been synthesized from chlormethyl styrene 1,4- divinylbenzene(DVB) with 1%, 4%, and 20%-crosslinked and macrocyclic ligand of cryptand type by copolymerization method and the adsorption of uranium(VI), nickel(II) and lutetium(III) ions have been investigated in various experimental conditions. The correlation between the adsorption characteristics of rare earths and transition metal on the resins and stability constants of complexes with macrocyclic ligand have been examined. The uranium ion was not adsorbed on the resins below pH 2.0, but the power of adsorption of uranium ion increased rapidly above pH 3.0. The adsorption power was in the order of 1%, 4% and 20%-crosslinked resin, but adsorptive characteristics of resins decreased in proportion to the order of dielectric constants of solvents.

Styrene을 이용한 OenNtn수지의 합성과우라늄(VI) 이온 흡착 특성 (Adsorption characteristic of uranium(VI) on OenNtn synthetic resin with styrene)

  • 김준태
    • 환경위생공학
    • /
    • 제23권2호
    • /
    • pp.47-53
    • /
    • 2008
  • The ion exchange resins have been synthesized from chloromethyl styrene (dangerous matter) 1, 4-divinylbenzene(DVB) with 1%, 5%, and 15%-crosslinked and macrocyclic ligand of cryptand type by copolymerization method and the adsorption of uranium(VI), cobalt(II) and europium(III) ions have been investigated in various experimental conditions. The correlation between the adsorption characteristics of rare earths and transition metal on the resins and stability constants of complexes with macrocyclic ligand have been examined. The uranium ion was not adsorbed on the resins below pH 2.0, but the power of adsorption of uranium ion increased rapidly above pH 3.0. The adsorption power was in the order of 1%, 5% and 15%-crosslinked resin, but adsorptive characteristics of resins decreased in proportion to the order of dielectric constants of solvents.

용존 6가 우라늄 및 실리카 표면 흡착 6가 우라늄 화학종 분포 연구 (Study on the Species Distributions of Dissolved U(VI) and Adsorbed U(VI) on Silica Surface)

  • 정의창;김태형;조용흠;김희경;조혜륜;차완식;백민훈;윤종일
    • 방사성폐기물학회지
    • /
    • 제18권1호
    • /
    • pp.63-72
    • /
    • 2020
  • 용존 6가 우라늄은 다양한 화학종으로 존재하며, 화학종의 분포는 수용액의 pH에 의존한다. 산성 및 중성 근처의 pH 환경에서는 대표적으로 UO22+, UO2OH+, (UO2)2(OH)22+, (UO2)3(OH)5+ 화학종이 공존한다. 수용액 속에 비결정성 실리카가 콜로이드 성질의 부유입자 상태로 존재할 때 용존 화학종은 실리카 표면에 쉽게 흡착된다. 이 연구에서는 표면 흡착 화학종의 분포가 용존 화학종의 분포를 따르는지 조사하였다. 시료의 pH 값이 3.5-7.5인 조건에서 3종의 용존 화학종(UO22+, UO2OH+, (UO2)3(OH)5+)과 2종의 표면 흡착 화학종(≡SiO2UO2, ≡SiO2(UO2)OH- 또는 ≡SiO2(UO2)3(OH)5-)의 시간 분해 발광(luminescence) 스펙트럼을 측정하였다. pH 변화에 따른 각 화학종의 스펙트럼 변화 양상을 비교한 결과로 표면 흡착 U(VI) 화학종의 분포는 용존 U(VI) 화학종의 분포와 다르다는 것을 확인하였다.

3차원 지하수 유동과 반응성용질이동 모델을 활용한 우라늄 흡착 및 이동에 관한 개념 모델링 (Conceptual Modeling on the Adsorption and Transport of Uranium Using 3-D Groundwater Flow and Reactive Transport Models)

  • 최병영;고용권;윤성택;김건영
    • 자원환경지질
    • /
    • 제41권6호
    • /
    • pp.719-729
    • /
    • 2008
  • 본 연구에서는 지구화학 모델을 활용하여 지하수 환경에서의 우라늄의 존재 형태, 흡착 및 이동 특성을 모사해 보았다. 흡착에 의한 우라늄의 지연 이동을 효과적으로 모사하기 위하여 3차원 지하수 유동 모델과 반응성 용질 이동 모델을 활용하였다. 모사 결과, $pCO_2=10^{-3.6}$조건에서 대부분의 우라늄 흡착(최대 99.5%)은 pH 5.5와 띠에서 발생하였다. $pCO_2$$10^{-2.5}$인 경우 우라늄이 대부분 흡착되는 pH범위는 6에서 7사이로 매우 좁았으며, 반면 $pCO_2=10^{-4.5}$인 경우에는 흡착되는 pH가 범위가 상대적으로 넓어 pH 5.5에서 8.5사이에서 대부분 흡착되었다. 음이온 화합물을 고려한 경우에는 pH 6 이하에서는 불소착물의 형성에 의해 우라늄 흡착이 감소하였다. 본 연구를 통하여, 우라늄 이동이 pH, $pCO_2$ 및 음이온의 종류와 농도 등 지하수의 지화학적 조건에 의해 상당히 영향을 받음을 알 수 있었다. 향후 여러 부지 조사 및 평가와 관련하여 우라늄 및 기타 유해성 화합물의 환경 영향을 예측하는데 있어 지구화학 모델이 중요한 도구로 활용되어야 할 것이다.

Adsorption of Rare Earth Metal Ion on N-Phenylaza-15-Crown-5 Synthetic Resin with Styrene Hazardous Material

  • Kim, Se-Bong;Kim, Joon-Tae
    • 통합자연과학논문집
    • /
    • 제7권2호
    • /
    • pp.130-137
    • /
    • 2014
  • Resins were synthesized by mixing N-phenylaza-15-crown-5 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 6%, and 12% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, thermo gravimetric analysis (TGA), surface area, and IR-spectroscopy. The effects of pH, equilibrium arrival time, dielectric constant of solvent and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ions were showed fast adsorption on the resins above pH 4. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (VI) > zinc (II) > europium (III) ions. The uranium ion adsorbed in the order of 1%, 2%, 6%, and 12% crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

Excitation and Emission Properties of Adsorbed U(VI) on Amorphous Silica Surface

  • Jung, Euo Chang;Kim, Tae-Hyeong;Kim, Hee-Kyung;Cho, Hye-Ryun;Cha, Wansik
    • 방사성폐기물학회지
    • /
    • 제18권4호
    • /
    • pp.497-508
    • /
    • 2020
  • In the geochemical field, the chemical speciation of hexavalent uranium (U(VI)) has been widely investigated by performing measurements to determine its luminescence properties, namely the excitation, emission, and lifetime. Of these properties, the excitation has been relatively overlooked in most time-resolved laser fluorescence spectroscopy (TRLFS) studies. In this study, TRLFS and continuous-wave excitation-emission matrix spectroscopy are adopted to characterize the excitation properties of U(VI) surface species that interact with amorphous silica. The luminescence spectra of U(VI) measured from a silica suspension and silica sediment showed very similar spectral shapes with similar lifetime values. In contrast, the excitation spectra of U(VI) measured from these samples were significantly different. The results show that distinctive excitation maxima appeared at approximately 220 and 280 nm for the silica suspension and silica sediment, respectively.

Removal of Uranium Ions in Lagoon Waste by Electrosorption

  • Jung, Chong-Hun;Won, Hui-Jun;Park, Wang-Kyu;Kim, Gye-Nam;Oh, Won-Zin;Hwang, Sung-Tai;Park, Jin-Ho
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2003년도 가을 학술논문집
    • /
    • pp.701-706
    • /
    • 2003
  • A study on the electrosorption of U(VI) onto porous activated carbon fibers (ACFs) was performed to treat uranium-containing lagoon sludge. Effective U(Ⅵ) removal is accomplished when a negative potential is applied to the activated carbon fiber(ACF) electrode. For a feed concentration of 100mg/L, the concentration of U(VI) in the cell effluent is reduced to less than 1mg/L. The adsorbed uranium could be deserted from the ACF by passing a 1M NaCl solution through the cell and applying a positive potential onto the electrode. The regeneration of ACF from the cycling experiments was confirmed.

  • PDF