• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.87-99
• /
• 1993

Nowadays, the cartridge valve can be controlled proportionally in remote place by adopting proportional solenoid and it becomes widely used as control component in hydraulic systems. Especially, multi stage proportional valve is attractive because it consumes less input power though its characteristics might slightly be defected. But, the system parameter should be carefully chosen to obtain optimistic characteristics. This study concerning three stage proportional throttle control valve is purposed to examine the influences of paameters to the dynamic characteristics. The typical transient and frequency responses of proportional throttle control valve were inspected through the experiments and compared to those derived from the theoritical analyses. And it was confirmed that the analyses are appropriate. Then the influences of various system parameters to the dynamic characteristics were examined by means of simulations. For the analyses, the basic equations derived from lumped model were linearized and the linearized equations were transformed to the transfer functions between inputs and outputs. Then the transient responses and frequency responses were obtained from transfer functions. 1. It is appropriate to estimate the dynamic characteristics of valve which has relatively sophisticated structure by means of system analyses using linearized equations. 2. Though the valve has two pilot stages, fairly good characteristics can be obtained by carefully choosing system parameters. 3. Main valve very quickly follows the movement of second pilot valve when the parameters of main valve(the oil supply passage and discharge passage fpr second pilot valve) are appropriately chosen.

• KIEAE Journal
• /
• 제3권4호
• /
• pp.3-14
• /
• 2003

Remodeling for an aged building is emerging as a potential alternative towards the future of the building industry. It is a more effective method than the new construction in environmental friendly view. Most of remodeling were aimed at the improvement of the function of the deteriorated finishing materials. But, at the early stage of remodeling process, energy performance of a building can be improved by adopting passive design solutions such as daylighting and natural ventilation. The purpose of this study is to explain the passive design strategy in remodeling process and to suggest a application of LT method. LT method is an energy-design tool which responds to parameters available early in design development. It provides an output of annual primary energy for lighting, heating, cooling and ventilation in non-domestic buildings. LT method basically uses the concept of passive zone and non-passive zones and should be used to evaluate the energy performance of a number of options and to make comparisons. In this paper, the process of LT method is introduced and investigated an applicability in our office building.

• 대한수의학회지
• /
• 제13권1호
• /
• pp.67-73
• /
• 1973

Toxoplasma gondii (Tp), RH strain, was inoculated into cultured buffy coat cells obtained from the swine blood. The main reason for adopting swine lies in the animal's unusual susceptibility to Tp, As for the culture method used in the experiment, those well proved methods practised by Cho, Merchant, Moore and Tarnvik were mainly referred to as a starting point: hence, the author's method has been turned out to be the modified or supplementary form of those methods. Observations were made on the phase of multiplication of Tp in the cytoplasm. The results obtained were as follows: 1. Better growth and multiplication of Toxoplasma gondii were noticeably observed in the swine buffy coat cell, inoculated after three-to-five day cultivation of the cell. 2. In the lapse of the observation period, there appeard Toxoplasma gondii rarely available in the earlier stage, which had been inoculated into the cell after three-to-five day cultivation. In other words, Toxoplasma gondii started to show itself in seven or eight hours after inoculation, most outstandingly noticeable between twenty four hours and forty eight hours. Thereafter the disintegration stage of Toxoplasma gondii was observed.

• 한국전자파학회논문지
• /
• 제13권3호
• /
• pp.269-278
• /
• 2002

본 논문에서는 비동기 Rayleigh 페이딩 채널에서 MUD 과정에서 발생하는 시간 지연을 최소화 하면서 서비스 별로 다르게 요구되는 QoS 요구를 충족시킬수 이는 부분 SSPIC I. II형 다중 사용자 검파 기법을 제안하고 성능을 분석하였다. 결과에 의하면 제안한 부분 SSPIC I, II형 기법 모두 SIC 단에서 발생되는 시간 지연을 효과적으로 단축할 수 있으며, 부분SSPIC I형 기법은 성능 및 용량 면에서 기존 SICPIC 기법보다 향상되었고, 부분 SSPIC II형 기법은 유사한 성능을 나타내었다. 따라서, 본 논문에서 제안한 부분 SSPIC I, II형 다중 사용자 검파 기법은 기존SICPIC 다중 사용자 검파 기법의 단점인 간섭 제거 과정에서 발생되는 시간 지연을 효과적으로 단축시킬 수 있고, 간섭 제거 기법을 적용하지 않은 기존의 CDMA 수신기와 비교하여 과도한 시스템의 복잡도 및 시간 지연의 증가 없이 효과적으로 시스템의 성능을 개선 할 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.9-21
• /
• 1998

The optimization of frontal device including fuel nozzle and swirler is required to secure the mixing of fuel and air, and the combustion stability in the gas turbine combustor design for the reduction of pollutant emissions and the increase of combustion efficiency. The effects of injection nozzle and swirler on the flow field, spray characteristics and consequently the combustion stability, were experimentally investigated by measuring the velocity field, droplet sizes of fuel spray, lean combustion limit and the temperature field in the main combustion region. The effect of fuel injection nozzle was tested by adopting three different nozzles; a dual orifice fuel nozzle, a hollow cone nozzle and a solid cone nozzle. These tests were combined with the three different swirler geometries; a dual-stage swirler with 40$^{\circ}$ /-4 5$^{\circ}$ vanes and two single-stage swirlers with 40$^{\circ}$ vane angle having 12 and 16vanes, respectively. Flow fields and spray characteristics were measured with APV(Adaptive Phase Doppler Velocimetry) under atmospheric condition using kerosine fuel. Temperatures were measured by Pt-PtI3%Rh, R-type thermocouple which was 0.2mm thick. It was found that the dual swirler resulted in the biggest recirculation zone with the highest reverse flow velocity at the central region, which lead the most stable combustion. The various combustion characteristics were observed as a function of the combination between the injector and swirler, that gave a tip for the better design of gas turbine combustor.

• Journal of Information Display
• /
• 제2권1호
• /
• pp.24-33
• /
• 2001

The characteristics of the reset and the address discharges of an alternating current Plasma Display Panel (ac PDP) were studied using 2-dimensional numerical discharge cell simulation. We investigated the wall charge variations during the reset discharge adopting ramping reset pulse and the subsequent addressing discharge. The roles of the ramping reset scheme can be divided into two stages, each electrode gathers wall charges during ramping-up of the initial stage and the built-up wall charges are lost during ramping-down of the later stage. Address discharge does not only change the wall charge distributions on the address and the scan electrodes but also on the sustain electrode. The increase in the wall charges on the sustain electrode was observed with the variation of the applied voltage to the sustain electrode during the address period. The increase of the applied voltage to the sustain electrode during the address period is expected to induce the decrease of the sustain voltage during the display period.

• 임상간호연구
• /
• 제18권2호
• /
• pp.307-316
• /
• 2012

Purpose: The purpose of this study was to develop and test psychometric properties the Korean version of the End-Stage Renal Disease Adherence Questionnaire (KESRD-AQ). The ESRD-AQ, a 46-item, multidimensional, self-administrated questionnaire which was developed to assess treatment adherence to hemodialysis (HD) attendance, medications, fluid restrictions, and diet prescription among patients on maintenance hemodialysis, has been validated. Methods: The KESRD-AQ was developed by performing both translation and backtranslation. The content validity and test- retest reliability of the KESRD-AQ were evaluated by establishing item-level content validity index (I-CVI) and intra-class correlation coefficients (ICC), respectively. Construct validity was assessed by adopting a known-group analysis comparing adheres and non-adherers using Mann-Whitney U Test. Results: 41 Korean-American patients with ESRD on HD from 3 outpatient dialysis centers in California participated in the study. The KESRD-AQ showed excellent content validity (average I-CVI=.96) and test-retest reliability (ICC=.917, p=.004). The construct validity indicated that the KESRD-AQ distinguished adheres and non-adheres (p=.02~.047). Conclusion: The KESRD-AQ is a valid and reliable instrument to measure treatment adherence.

• 생물정신의학
• /
• 제19권4호
• /
• pp.153-158
• /
• 2012

Understanding of a clinical trial is essential in developing clinical guideline and adopting evidence based practice. In designing and executing clinical trials, following ethical requirements should be considered : social value, scientific validity, fair subject selection, informed consent, favorable risk-benefit ratio, institutional review board, and respect for human subjects. According to the stage of drug development, purpose of trials, accumulated scientific data, clinical trials for drug development are classified as phase 1, 2, 3, and 4. Phases of clinical trials can be overlapped and the judgment of entering into the next phase should be considered highly strategically. In reading, evaluating and interpreting clinical trial reports, various skills and challenges exist. Patient sample composition, trial duration, selection of endpoints, responders and non-responders, placebo effect, patient recruitment, and extrapolation to the real world are the examples of those challenges. Treatment success will come from the well balanced approach of evidence based decision making and consideration of specific single case.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.187-194
• /
• 2000

Weight reduction for an automobile body is being sought for the fuel efficiency and the energy conservation. One way of the efforts is adopting Ultra Light Steel Auto Body (ULSAB) concept. The ULSAB concept can be used for the light weight of an automobile door with the tailor welded blank (TWB). A design process is defined for the TWB. The inner panel of door is designed by the TWB and optimization. The design starts from an existing component. At first, the hinge and inner reinforcements are removed. In the conceptual design stage, topology optimization is conducted to find the distribution of variable thicknesses. The number of parts and the welding lines are determined from the topology design. In the detailed design process, size optimization is carried out to find thickness while stiffness constraints are satisfied. The final parting lines are determined by shape optimization.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2002년도 11월 학술대회지
• /
• pp.179-182
• /
• 2002

The development of noise robust speech processing systems is becoming increasingly important as speech technology is currently widely applied in real world applications. Recently, to resolve such a noise problem, adaptive noise canceller(ANC) is frequently used, which is based upon adaptive filters. The adaptive recursive filters perform better than adaptive non-recursive filters due to the added poles, but the stability may be severely threatened. But these problems of adaptive recursive filters was solved by ACHARF algorithm. This paper presents a method which combines speaker verification system with ANC(Adaptive Noise Canceller) using the ACHARF algorithm. In the front-end stage, ANC is adopted to suppress the additive noise imposed on the speech signal. The results show that the performance of speaker verification system becomes better than before.