• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.367-376
• /
• 2016

This paper presents a cell balancing method for a single switch flyback converter with a multi-winding transformer. The conventional method using a flyback converter with a multi-winding transformer is simple and easy to control, but the voltage of each secondary winding coil might be non-uniform because of the unequal effective turn-ratio. In particular, it is difficult to control the non-uniform effect using turn-ratios because secondary coil has a limited number of turns. The non-uniform secondary voltages disturb the cell balancing procedure and induce an unbalance in cell voltages. Individual cell control by adding a switch for each cell can reduce the undesirable effect. However, the circuit becomes bulky, resulting in additional loss. The proposed method here uses the conventional flyback converter with an adjustment made to the output filters of the cells, instead of the additional switch. The magnitude of voltage applied to a particular cell can be reduced or increased according to the adjusted filter and the selected switching frequency. An analysis of the conventional converter configuration and the filter design method reveals the possibility of adequate cell balancing control without any additional switch on the secondary side.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2365-2370
• /
• 2009

A working electrode in dye-sensitized solar cells was fabricated using $TiO_2$ colloidal sol prepared from titanium isopropoxide used as a starting material by applying the sol-gel method. The effect of aging times and temperatures on physical and chemical properties of $TiO_2$ sol particles was systematically investigated. Results showed that the crystallinity and average particle size of $TiO_2$ colloidal sol can be successfully controlled by the adjustment of aging time and temperature. The conversion efficiency of the repetitive dry coating films fabricated using the dried $TiO_2$ colloidal sol particles and hydroxypropyl cellulose binder (15%) was 10.31% with a high transparency.

• Journal of Yeungnam Medical Science
• /
• v.23 no.1
• /
• pp.10-18
• /
• 2006

Epithelial to mesenchymal transition (EMT) is an important etiologic factor for the development of peritoneal fibrosis in CAPD patients. Mesothelial cells are main source of trans-differentiated fibroblasts under stress from the bioincompatible peritoneal dialysate. In our study there was no difference in dialysate TGF-${\beta}$ and VEGF between the low and high GDP groups during an initial 12 months. However, after adjusting with D-CA125, the low GDPs group showed a significantly lower D-TGF-${\beta}$/D-CA125 and D-VEGF/CA125 during the initial 12 months. Among the adjusted peritoneal growth factors for CA125, VEGF/CA125 and TGF-b/CA125 were factors significantly associated with greater EMT in this study. Adjustment of the peritoneal growth factor for effluent CA125 (surrogate for mass of HPMCs) revealed significant association with EMT suggesting that the fibroblastoid transition from HPMCs could be affected by the amount of intraperitoneal growth factors (TGF-b, VEGF) per unit mass of HPMCs. There was significant improvement in both cell score and D-CA125 at the sixth and 12th months after switching from a high GDPs solution to a low GDPs solution. Use of icodextrin solution in patients who had average peritoneal transport showed not only better systemic effects such as decreased glucose absorption via dialysate but also preservation of the peritoneum, including less EMT and high mesothelial bulk mass. In conclusion, Therapy with low GDP solution including icodextrin may positively impact preservation of the peritoneal membrane integrity and prevention of peritoneal fibrosis with time on PD.

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.1-10
• /
• 2023

In this study, we investigate the liquid crystal (LC) alignment of LC cells created from plant-based polysaccharide derivatives, such as guar gum. Guar gum films exhibit satisfactorily high optical transparency in the visible light region (400-750 nm). For example, the transmittance of polyimide films, which are the most typically used LC alignment layers, is 87%, whereas that of guar gum films deposited onto a glass substrate at a wavelength of 550 nm is approximately 99%. The observed LC alignment depends on the rubbing depth. For example, an LC cell comprising a guar gum film fabricated via rubbing at rubbing depths of 0.1, 0.2, 0.3, and 0.4 mm exhibits a planar LC alignment, whereas it exhibits a vertical LC alignment at a rubbing depth of 0.5 mm. Additionally, the LC alignment is shown to be correlated with the total surface energy of the guar gum films. When the total surface energy of a rubbed guar gum film exceeds 58.10 mJ/m², an LC cell comprising the guar gum film exhibits a stable and vertical LC alignment. Therefore, guar gum can be used to realize the vertical alignment system of LC via a simple adjustment of the rubbing depth.

• Journal of Life Science
• /
• v.31 no.12
• /
• pp.1072-1078
• /
• 2021

The oral pathogen Streptococcus mutans is considered a major causative agent of dental caries in humans. The use of dental hygiene products, including toothpaste and mouthwash, is used for caries control. However, food intake can lead to the recurrence of oral microorganisms. This study aimed to explore why this bacterium dies so quickly during prolonged incubation and to assess whether this growth characteristic is closely associated with the secretion of metabolic products. Notably, the number of live S. mutans cells rapidly declined after 24 hr during the entire period tested, whereas the number of Escherichia coli cells, an indicator strain, remained steady over the same period. To test whether the S. mutans supernatants contained possible signals that accelerated the death of neighbor cells, we obtained the individual supernatants at the above time points. Following pH neutralization, the cells in which the supernatant was supplemented with glucose grew well. However, pH adjustment alone could not fully recover cell growth in conditions in which the supernatant was supplemented, with or without glucose. These phenotypes of S. mutans may be associated with signaling, not only resulting from nutrient depletion. The findings on the survival phenotype of S. mutans provide new insights into cell-cell communication in the biology of this bacterium.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.39-57
• /
• 2001

Categorical data has sometimes misclassification errors. If this data will be analyzed, then estimated cell probabilities could be biased and the standard Pearson X2 tests may have inflated true type I error rates. On the other hand, if we regard wellclassified data with misclassified one, then we might spend lots of cost and time on adjustment of misclassification. It is a necessary and important step to ask whether categorical data is misclassified before analyzing data. In this paper, when data is misclassified at one of two variables for two-dimensional contingency table and marginal sums of a well-classified variable are fixed. We explore to partition marginal sums into each cells via the concepts of Bound and Collapse of Sebastiani and Ramoni (1997). The double sampling scheme (Tenenbein 1970) is used to obtain informations of misclassification. We propose test statistics in order to solve misclassification problems and examine behaviors of the statistics by simulation studies.

• Animal cells and systems
• /
• v.4 no.3
• /
• pp.223-229
• /
• 2000

Limbs and supporting structures of an organism experience a full weight of its own when it lands from water, because neutral buoyancy in the aquatic habitat will be no longer available in the terrestrial world. Metamorphosis of anuran amphibians presents 8 good research model to examine how this transition from non-loading to weight-loading affects development of motor capacity at the time of their first emergence on land. Our video analysis of the transitional anurans, Rana catesbeiana, at Gosner stage 46 (the stage of complete transformation) demonstrated that the take-off speed increased 1.23-fold after the first six hours of weight-loading on the wet ground. It did not increase further during the following three days of loading, and was close to the level of mature frogs with different body mass. During development of larvae in deep water with no chance of landing through metamorphosis, both tension and power of a hindlimb anti-gravity muscle increased 5-fold between stages 37 and n. However, the muscle contractility increased more rapidly when the larvas could access the wet ground by their natural landing behavior after stages 41-42. Muscle power, one of major factors affecting locomotory speed, was 1.29-fold greater in the loaded than in the non-loaded larvae at the transitional stage. Thus, weight-loading had a potentially significant effect on the elevation of motor capacity, with a similar extent of increment in locomotory speed and muscle power during the last stages of metamorphosis. Such a motor adjustment of the froglets in a relatively short transitional period would be important for effective ecological interactions and survival in their inexperienced terrestrial life.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.762-771
• /
• 2012

In this paper, we propose an adaptive power control scheme employing a self-optimization concept in femtocell systems, in order to improve system capacity, thereby reducing call-drop probability. In the proposed scheme, each femto base station(FBS) controls individual channel's transmission power base on two parameters; the neighboring cell's transmission power for each individual channel which is delivered from a femto-gateway and the received power strength from neighboring cells which is periodically measured by means of a spectrum sensing. Adaptive adjustment of individual channel's transmission power in accordance with femto mobile station(FMS) mobility features can also reduce undesirable handovers and evenly distribute traffic load over all femtocells. In addition, the manipulative control of channel's transmission power is able to keep the system coverage and the call-drop probability within an acceptable range, regardless of density of femtocells. Computer simulation shows that the proposed scheme outperforms existing schemes in terms of the system coverage and the call-drop probability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.133-138
• /
• 2022

In this paper we present the system we produced to help workers at logistic centers and prevent accidents, in which they could get hurt. As a base we use the main control device, named Arduino uno, which measures the weight by using load cells. When operating with the system, by placing object on it, the system measures the weight of the object and keeps the highest point at the same height by lowering its board. This improves the convenience while placing and removing objects from the board. If the weight of the placed object is exceeding the set value the board will also lower itself to secure the safety. By using a line tracer system, the objects are being moved only on a set route with the goal to make it even more comfortable to use.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.238-243
• /
• 1981

This experiment was carried out to study the availability of Korean peat as a main carrier material of rhizobial inoculant, using the alfalfa strain Rhizobium meliloti M 14 which was isolated in the previous report. Modification of powdered peat with calcium carbonate and other materials was studied; inoculation of the peat with culture broth, maturation of the mixture under different conditions, and survival of the strain in the peat culture was examined. The results obtained were as follows. 1. Peat produced in Pyongtak was highly acidic, pH 3.8, and addition of calcium carbonate by 14% was required for pH adjustment to 6.4. However the amount of calcium carbonate could be reduced by 4 to 8% when carbon or charcoal was mixed with the peat. 2. Viable number of the strain reached to $7-9{\times}10^9cells/g$ after 3 days, when inoculated with the culture broth of early stationary growth phase and matured in unsteriled peat of open trays; and the number in steriled peat was $1.1-6.2{\times}10^{10}cells/g$ after 5 days, when matured in closed bottles. 3. Survival of the strain was affected markedly by storage temperature, and positive effect of D-sorbitol on the viability was recognized at elevated temperatures, when added as an additional carbon source and moistening agent. Glycerol, sorbitol, or sodium lactate was utilized by the strain as a sole source of carbon, and the decimal reduction time of viable number in the peat culture was was found to be 8 to 9 weeks at $25^{\circ}C$ when these agents were added by 0.5%.