• 제목/요약/키워드: Adjustment amount

검색결과 224건 처리시간 0.035초

Adaptive Adjustment of Compressed Measurements for Wideband Spectrum Sensing

  • Gao, Yulong;Zhang, Wei;Ma, Yongkui
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권1호
    • /
    • pp.58-78
    • /
    • 2016
  • Compressed sensing (CS) possesses the potential benefits for spectrum sensing of wideband signal in cognitive radio. The sparsity of signal in frequency domain denotes the number of occupied channels for spectrum sensing. This paper presents a scheme of adaptively adjusting the number of compressed measurements to reduce the unnecessary computational complexity when priori information about the sparsity of signal cannot be acquired. Firstly, a method of sparsity estimation is introduced because the sparsity of signal is not available in some cognitive radio environments, and the relationship between the amount of used data and estimation accuracy is discussed. Then the SNR of the compressed signal is derived in the closed form. Based on the SNR of the compressed signal and estimated sparsity, an adaptive algorithm of adjusting the number of compressed measurements is proposed. Finally, some simulations are performed, and the results illustrate that the simulations agree with theoretical analysis, which prove the effectiveness of the proposed adaptive adjusting of compressed measurements.

Dynamic Adjustment of Ad hoc Traffic Indication Map(ATIM) window to save Power in IEEE 802.11 DCF

  • Nam, Jae-Hyun
    • Journal of information and communication convergence engineering
    • /
    • 제6권3호
    • /
    • pp.343-347
    • /
    • 2008
  • Wakeup schemes that turn off sensors' radio when communication is not necessary have great potential in energy saving. At the start of each beacon interval in the IEEE 802.11 power saving mode specified for DCF, each node periodically wakes up for duration called the ATIM Window. However, in the power saving mechanism specified in IEEE 802.11, all nodes use the same ATIM window size. Since the ATIM window size critically affects throughput and energy consumption, a fixed ATIM window does not perform well in all situations. This paper proposes an adaptive mechanism to dynamically choose an ATIM window size according to network condition. Simulation results show that the proposed scheme outperforms the IEEE 802.11 power saving mechanism in terms of the amount of power consumed and the packet delivery ratio.

서울 지하철의 운임제도 개선방안 (The Improved Device of Seoul Subway Fare System)

  • 이태식;전영준;권오철;정종기;이동욱
    • 한국철도학회논문집
    • /
    • 제9권2호
    • /
    • pp.200-205
    • /
    • 2006
  • Subway widely used as a major mean of public transportation both at home and abroad contributes to ease chronic traffic congestion in cities. However, subway operating expense is expected to increase continuously because subway requires vast amount of money at the construction stage, huge sum of maintenance cost is spent during operation, and passenger needs for more convenient facilities is increasing. on the contrary to enormous operating expenses, fare that is occupying most of operating income doesn't come up to its prime cost causing chronic operating deficit. It is urgent to prepare fare system improvement measures to increase operating income in order to resolve financial difficulty of a subway operating organization. Therefore, the current study analyzed present condition and problems of subway fare system, and suggested improvement measures such as improvement of fare adjustment procedure, improvement of free-ride system, diversification of ticket, etc.

Faraday's Law에 의한 전기응집공정의 분석 (Analysis of Electrocoagulation Process using Faraday's Law)

  • 김혜숙;윤영임;조은정;최윤희;오미영;김영관
    • 산업기술연구
    • /
    • 제21권A호
    • /
    • pp.351-355
    • /
    • 2001
  • This research was carried out to find out the possibility of using Faraday's law in analyzing the electrocoagulation system. Bench-scale reactor equipped with aluminum electrode plates was operated using synthetic wastewater which received sodium chloride for conductivity adjustment. Phosphate was added to the wastewater to induce the precipitation with Al. The amount of aluminum dissolved from the electrodes could be predicted by Faraday's law with a difference less than 5%. This difference was greater at a higher electric current, probably due to the increased solution temperature. However, effect of pH on the dissolution of the aluminum was negligible. The result of this study suggested that the operating condition of electrocoagulation system could be developed using the Faraday's law when the pollutant concentration is given.

  • PDF

갈색부후균 Tyromyces palustris의 수산대사와 목질분해 특성 (Oxalic Acid Metabolism and Decay Characteristics of Tyromyces palustris)

  • 손동원;이동흡;오정수
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권4호
    • /
    • pp.54-59
    • /
    • 1995
  • This experiment was carried out to evaluate the role of oxalic acid metabolism in the incipient decay of brown rotting, and to investigate the effects of various compositions of culture medium. Until 5days incubation, the amount of oxalic acid produced by Tyromyces palustris was increased, while pH was gradually decreased. The difference in oxalic acid production depending on carbon sources was not significant and the pH adjustment of media did not stimulate the production of oxalic acid. In this experiment, hemicellulose was hydrolyzed with 1% oxalic acid, so it is suggested that nonenzymatic acid hydrolysis of hemicelluloses might be involved in the process of incipient decay of brown-rot fungi.

  • PDF

PLL Synthesizer를 이용한 새로운 FM 회로 설계 및 제작 (Design and Implementation of a Novel Frequency Modulation Circuit using Phase Locked Synthesizer)

  • 양승식;이종환;염경환
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.224-228
    • /
    • 2003
  • In this paper, for phase lock loop(PLL) synthesizer, we introduce a novel but simple and low cost frequency modulation(FM) circuit of a flat peak frequency deviation for modulation signal from high to very low frequency penetrating into the loop-bandwidth of PLL. The FM circuit was basically designed to compensate an amount of feedback of the loop filter in PLL. The circuit also includes the capability of the adjustment of peak frequency deviation and blocking the interference with the loop filter. The designed circuit was successfully implemented and showed the flat frequency deviation as expected in the design.

  • PDF

한국인(韓國人)의 Bracket base (in-and-out) 에 관(關)한 연구(硏究) (A STUDY OF BRACKET BASE (IN-AND-OUT) IN KOREAN)

  • 양재우;이동주
    • 대한치과교정학회지
    • /
    • 제20권2호
    • /
    • pp.355-361
    • /
    • 1990
  • This study was undertaken to finish the design of the adequate preadjusted bracket in Korean. The labio-lingual & bucco-lingual width of tooth & in-and-out of the bracket base was studied in normal occlusion of 17 males & 17 females. The following results were obtained. 1. The in-and-outs of the bracket base in Korean were obtained (table 2). 2. The in-and-outs of the premolar & molar were no significant due to variation according to arch wire shape in clinical practice, so the more adjustment of arch wire was required. 3. The more amount of offset was required at lateral-canine offset than at central-lateral offset in 1st order bending, due to difference of the in-and-out. 4. The degrees of the anti-rotation in molar were obtained (table 3).

  • PDF

모선주입전력 조정에 의한 과부하 해소 앨고리즘 (Overload Alleviation Algorithm by the Bus Injection Power Control)

  • 박규홍;정재길;안민옥
    • 대한전기학회논문지
    • /
    • 제39권2호
    • /
    • pp.111-118
    • /
    • 1990
  • This paper presents a new algorithm of contingency analysis and countermeasure to alleviate the line overloads for electric power systems. In this algorithm, the inverse matrix of the new Jacobian matrix when a contingency occurs, in fastly calculated using the house-holder's Inverse Matrix Modification Lamma (IMML) with the original factor table. The generation outputs are firstly adjusted to alleviate all line overloads occurred by the contingency without tripping loads. If the generation adjustment is not enough anymore to alleviate line overloads, then the control of bus injection power is recommended to quickly alleviate remaining overloads with minimum amount of load tripping and generation read-justing at the termination busbars of the overload lines. The proposed algorithm has been validated in tests on the 6 busbar test system.

  • PDF

Lead Biosorption by Biosorbent Materials of Marine Brown Algae U. pinnatifida, H. fusiformis, and S. fulvellum

  • LEE Mingyu;KAM Sangkyu;LEE Donghwan
    • 한국수산과학회지
    • /
    • 제30권6호
    • /
    • pp.936-943
    • /
    • 1997
  • Biosorbents of nonliving, dried marine brown algae Undaria pinnatifida, Hizikia fusiformis, and Sargassum fulvellum were investigated for their lead biosorption performances. As the amount of biosorbent added was increased, the lead removal by biosorbent materials increased but the lead biosorption capacities decreased. However the lead biosorption capacity by the biosorbent materials increased with increasing initial lead concentration and pH in the range of $C_o\;10\~500\;mg/L$. Among the biosorbent materials used in this study, the lead biosorption capacity in the solutions with no pH adjustment decreased in the following sequence: U. pinnatifida > H. fusiformis > S. fulvellum. Equilibrium parameters based on Langmuir and Freundlich isotherm were determined. It was found that the lead biosorption by biosorbent materials were expressed by the Langmuir isotherm better than the Freundlich isotherm.

  • PDF

우수토실에 설치된 월류수 제어를 위한 유입유량조절장치의 개선효과 (Improvements of Inflow Controller Installed in Storm Overflow Diverging Tank for CSOs Control)

  • 임봉수;박윤해;김태응
    • 한국물환경학회지
    • /
    • 제31권4호
    • /
    • pp.428-435
    • /
    • 2015
  • This study was carried out to evaluate the performance of a inflow controller for the control of combined sewer overflows (CSOs). Because of the inflow controller could be adjusted manually by predicting the maximum amount of peak flow, the mechanical adjustment of this controller was higher than the existing fixed-type controller in field application. Standardizing the relationship between the flow and the clearance and angle of an inlet cover plate on the inflow conditions can selected to the optimum conditions for the on-site. It was concluded that BOD pollutant loading at the region in which inflow controller was installed had shown the removal efficiency rate of 42%.