• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.317-318
• /
• 2003

전기활성고분자인 poly(vinylidene fluoride)(이하 PVDF로 약기)와 전기비활성 고분자와의 혼화성블렌드에서 외부전장이 이 블렌드의 상분리거동에 미치는 영향을 조사하기에 적합한 전기비활성고분자를 찾은 결과 측쇄에 C=O기를 갖는 poly(ethyl methacrylate)(이하 PEMA)와 주쇄에 C=O기를 갖는 poly(1,4-butylene adipate)(이하 PBA로 약기)가 좋은 후보 고분자로 사용가능함을 보였다. 측쇄에 C=O기를 갖는 고분자인 PMMA와 PVDF와의 블렌드에서 PVDF의 융점보다 상당히 높은 온도인 35$0^{\circ}C$ 이상의 온도에서 lower critical solution temperature (이하 LCST로 약기) 거동을 보이는 것으로 알려져 있기 때문에 [1] 실제로 이들 블렌드계에서 열분해를 배제하면서 LSCT거동을 실험적으로 관찰하기는 불가능하다. (중략)

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.455-463
• /
• 1996

Aluminium nitride (AlN) powder was prepared by using aluminium (III) complexes with dibasic carboxylate ligands(adipato)(hydroxo) aluminium(III) and (hydroxo)(succinato)aluminium (III) as a precursor. The AlN pow-der was obtained by calcining the complexes without mixing any carbon source under a flow of ammonia at 120$0^{\circ}C$ Contary to the conventional carbothermal reduction and nitridiation the process of decarboniza-tion of the residual carbon was not required because of the reaction of ammonia with carbon at temperature >100$0^{\circ}C$. Fine AlN powder was also prepared by calcining a mixture of an (adipato)(hydroxo)aluminium(III) complex and carbon under a flow of nitrogen at 140$0^{\circ}C$ The AlN powders prepared were ultrafine and their morphology was almost the same as that of powders of two precursors.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.42-47
• /
• 2001

The hardening system of polyurethanes has usually caused by air pollution. bad working condition and fire hazard according to using orgarnic solvents. Therefore there have been researched on emulsion, water soluble and colloid-dispersion based water soluble instead of using organic solvents recently. This study synthesized polyurethane dispersing particle by means of mixing precursor and neutralized emulsion method. In the first step, polyurethane was preparated from isophorone diisocyanate and poly (ethylene-adipate) glycol, and got precursor by introducing dimethyl propionic acid as a hydrophilic group. Synthesized polyurethane was bonded to the surface of fiber and crosslinked as a anti-static agent, and then looked for the change of color and softening property.

• 한국미생물·생명공학회지
• /
• 제27권2호
• /
• pp.107-112
• /
• 1999

A bacterium, which can utilize cyclohexanol as a sole source of carbon and energy, was isolated from sludge in sewage of Ulsan Industrial Complex for Petrochemicals, Korea and identified as Rhodococcus sp. TK6. The growth conditions of the bacteria were investigated in cyclohexanol containing media. The bacteria utilized cyclohexanol, cyclohexanone, cyclohexane-1,2=diol, cyclopentanol, cyclopentanone, and $\varepsilon$-caprolactone but not cyclohexane, cyclohexane-1,2-dione, and cyclooctanone. The bacteria were able to utilize alcohols such as ethanol, 1-propanol, 1-butanol, 1-pentanol, 1-hexanol, 2-methyl-1-propanol, 3-methyl-1-butanol, 2-propanol, and 2-butanol as well as cyclohexanol, organic acids such as adipate, propionate, butyrate, valerate, n-caproate, and 6-hydroxycaproate, and aromatic compounds such as phenol, salicylate, p-hydroxbenzoate, and benzoate as a sole source of carbon and energy. Cyclohexanone as a degradation product of cyclohexanol by Rhodococcus sp. TK6 was determined with gas chromatography.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3159-3162
• /
• 2010

To realize highly selective recognition of oxalate in water, a new chemosensing ensemble that behaves highly selective colorimetric recognition of oxalate in water at pH 7.4 has been developed. The ensemble was constructed by a pyrrole containing mononuclear copper complex and chromeazurol S. The ensemble shows a highly selective recognition of oxalate through an obvious color change from blue to yellow upon the addition of oxalate, whereas, other dicarboxylates such as malonate, succinate, fumarate, maleate, glutarate, adipate, phthalate, isophthalate and terephthalate do not induce any noticeable color changes. The oxalate recognition process is not significantly affected by other coexisting dicarboxylate.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.86-94
• /
• 2018

The effect of the NCO index and catalyst type on the thermal stability of poly(urethane-isocyanurate) (PUIR) foams was investigated to identify a method for enhancing the flame resistance of PUIR. PUIR foams were prepared using 4,4-diphenylmethane diisocyanate (MDI) and [(diethylene glycol)adipate]diol, which were synthesized by esterification of adipic acid and diethylene glycol. Dabco K-15, Dabco TMR-30, and Toyocat RX-5 were used as the catalysts for trimerization and gelation. The amount of urea and isocyanurate groups in PUIR was semi-quantitatively determined by normalizing their absorbance with the phenyl absorbance measured by FT-IR. The normalization data showed that Dabco TMR-30 effectively generated isocyanurate groups in PUIR. As a result, Dabco TMR-30 effectively raised the decomposition temperature and increased the 800 K and 900 K residues of the PUIR foam synthesized with an NCO index of 200.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.285-291
• /
• 1999

Effects of catalysts on network structure, hard segment length and distribution of polyurethane foams in the absence of catalysts were investigated. CFC free all MDI-based poly urethane foams were prepared from poly(ethylene adipate)glycol, 4,4'-diphenylmethane diisocyanate, and water. Amino catalysts used were 1,4-diazabicyclo[2,2,2]octane(DABCO), N, N,N',N'-tetramethyl--hexane-1,6-diamine(MR), bis(2-methylamino ethyl)ether(ET), 1,8-diazabicyclo-[5,4,0]-undecene-7(DBU). Dibutyltindilaurate(DBTL) as control was also used. Hard segment components of polyurethane foams were obtained by a selective degradation of polyester chains with 0.01N KOH-methanol solution. The PUFs with DBU catalyst contained more amount of isocyanurate components than other PUFs. On the other hand, the PUFs with ET, MR, DBTL catalysts contained more amount of allophanate and biuret component than the other PUFs.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.35-39
• /
• 2019

Four different polymer compounds were prepared from four kinds of plasticizers, viz. di-2-ethylhexyl azelate (DOZ), di-2-ethylhexyl adipate (DOA), di-2-ethylhexyl sebacate (DOS), and di-2-butyl sebacate (DBS), for making cable sheaths for ships. Ethylene-vinyl acetate and ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinyl acetate grafted maleic anhydride as a coupling agent were compounded with a flame retardant, crosslinking agent, filler, and other additives, besides the plasticizer to obtain the polymer compounds. The polymer containing DOZ showed the highest MH and ${\Delta}T$ in the rheology test, while that containing DBS was found to have the lowest tensile strength and highest elongation because of low ${\Delta}T$. The four polymers showed similar values (31.7-31.9) for flame resistance, while the polymer containing DOZ showed the highest value for cold resistance.

• 환경생물
• /
• 제28권2호
• /
• pp.95-100
• /
• 2010

우리나라 토양으로부터 분리된 (주와 김 2009) poly (butylene succinate-co-butylene adipate; PBSA) 분해균 Burkholderia cepacia PBSA-7, Bacillus licheniformis PBSA-8 및 Burkholderia sp. PBSA-9에서 PBSA 분해효소를 암호화하는 유전자를 분석하였다. PCR을 수행하여 B.cepacia PBSA-7과 Burkholderia sp. PBSA-9는 약 1.5 Kb, B. licheniformis PBSA-8은 약 600 bp의 lipase 유전자(lip A) 절편을 가지는 것을 확인하였다. 세 균주 모두에서 유전자의 염기서열 내 lipase box인 Gly-X1-Ser-X2-Gly와 Ala-X1-Ser-X2-Gly가 존재하였다. B. cepacia PBSA-7의 PBSA 분해효소 유전자는 family I-1 lipases와 36~40%, family I-2 lipases와는 82~92%의 높은 유전적 상동성을 보였다. 또한 B. licheniformis PBSA-8의 PBSA 분해효소 유전자는 subfamily 1-4 lipases와 64~65%의 유전적 상동성을 나타내었으나, subfamily 1-5에 속하는 lipase들과는 거의 유전적 상동성이 없는 것으로 나타났다. Burkholderia sp. PBSA-9의 PBSA 분해효소 유전자도 family I-1 lipases와 35~37%, family I-2 lipases와는 83~94%로 높은 유전적 상동성을 보여 B. cepacia PBSA-7의 PBSA 분해효소 유전자와 유사한 결과를 보였다.

• 한국재료학회지
• /
• 제10권5호
• /
• pp.375-381
• /
• 2000

전해콘텐서용 알루미늄박을 ammonium adipate 용액을 이용하여 $65^{\circ}C$에서 10분간 100V 및 140V로 각각 양극 산화시켜 산화 알루미늄 유전체를 만들었다. 유전층의 두께, 화학양론적 관계, 결정구조 등을 RBS 및 TEM을 이용하여 분석하였고, 알루미늄박의 에칭시 황산 첨가로 인한 표면적의 변화는 임피던스 분석법으로 조사 하였다. 생성된 유전피막은 100V 및 140V의 전압을 사용했을 경우 각각 약 130nm 및 190nm 두께의 비정질로 나타났으며 피막의 알루미늄과 산소원소의 화학양자론적 비는 약 2:3의 비율로 존재했다. 또한 유전피막은 전자빔은 조사에 의해 쉽게 $${\gamma}$-Al_2$$O_3$ 형태의 결정질로 변태 되었다. 염산 에칭욕에 황산 첨가시 나타나는 알루미늄박의 표면변화는 임피던스 분석결과와 정전 용략의 변화가 일치하는 경향을 나타냈다.