• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.537-544
• /
• 2008

In this paper, flow characteristics of an adiabatic capillary tube in a transcritical $CO_2$ have been investigated employing the homogeneous model. The model is based on fundamental equations of mass, energy and momentum which are solved simultaneously. Two friction factors(Churchill) and viscosity(McAdams) are comparatively used to investigate the flow characteristics. Supercritical and subcritical thermodynamic and transport properties of $CO_2$ are calculated employing EES property code. Flow characteristics analysis of $CO_2$ adiabatic capillary tube is presented to offer the basic design data for the operating parameters. The operating parameters considered in this study include inlet temperature and pressure of an adiabatic capillary tube, evaporating temperature and inner diameter tube. The main results were summarized as follows : inlet temperature and pressure of an adiabatic capillary tube, evaporating temperature, mass flowrate and inner diameter of $CO_2$ adiabatic capillary tube have an effect on length of an adiabatic capillary tube.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.56-57
• /
• 2013

In this study, in regard to concrete considering variety of admixture content rate, we evaluated property of adiabatic temperature rise. By setting up high temperature history, we evaluated effect to compression strength property of high strength concrete by early high temperature history. As a result, early high temperature history accelerated Hydration reaction of cement and contribute early strength development but it didn't accomplish performance objective in long-term aged.

• 임산에너지
• /
• 제21권2호
• /
• pp.62-68
• /
• 2002

본 실험에서는 합판벽체내의 단열재 종류에 따른 단열성능을 비교 평가하였다. 열의 통과량을 비교해 보기 위하여 열관류 실험을 하였다. 열관류 실험결과 스티로폼과 유리섬유의 열관류율이 적게 나타났다. 용적비열은 황토보드와 집성목이 높은 결과를 나타내었다. 합판 벽체로 제작된 모형 주택을 이용한 실내외 온도변화를 비교해 본 결과 단열재료로스티로폼과 유리섬유를 사용한 벽체의 경우 외부 온도에 쉽게 영향을 받는 것을 알 수 있었으며 용적비열이 높은 황토보드, 황토ㆍ톱밥 혼합재, 집성목을 사용한 벽체의 경우는 외부온도의 변화에 비해 적은 온도변화를 보였다. 실험결과 열관류율은 스티로폼과 유리섬유가 작았지만 용적비열이 높은 황토보드와 황토ㆍ톱밥 혼합재, 집성목이 단열성능면에서 우수함을나타내었다.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.449-454
• /
• 2010

본 논문은 균질유동모델을 적용하여 단열 모세관내 R600a의 유동 특성을 이론적으로 조사하였다. 이 모델은 시뮬레이션 해석에 필요한 기본적인 질량, 에너지, 운동량 방정식에 근거하고 있다. 또한 2개의 마찰인자와 점성계수모델을 이용하여 유동특성을 조사하였다. R600a의 열역학 및 전달 물성치는 EES 물성치 코드를 이용하여 계산하였다. 작동변수들에 대한 기초 설계자료를 제공하고자 단열 모세관내 R600a의 유동 특성을 분석하였다. 본 연구의 작동변수에는 응축온도, 증발온도, 과냉각도, 모세관의 직경이 있다. 주요 결과를 요약하면 다음과 같다. R600a용 단열 모세관내 응축온도, 증발온도, 과냉각도, 관직경은 모세관 전체길이에 영향을 준다. 즉 R600a용 모세관 전체길이는 식(15)와 같은 상관식으로 나타낸다.

• 한국염색가공학회지
• /
• 제35권2호
• /
• pp.128-136
• /
• 2023

Recently, the automobile industry is developing as the demand for automo- biles increases due to industrial development and population growth. In addition, many studies are being conducted to reduce heat loss inside the automobiles in order to save energy inside the automobiles due to environmental regulations. In this study, alumina, nanosilicon, and aerogel, which are adiabatic materials, were filled in PET to manufacture yarn, identify physical and mechanical properties, and weave into fabric to confirm adiabatic performance. As the content of the adiabatic material increased, the tensile strength of the fibers filled with alumina and nanosilicon decreased greatly, and the adiabatic property slightly increased. The tensile strength of fibers filled with the aerogel decreased slightly, but the adiabatic properties were greatly increased. Therefore, it is considered to be due to the large volume fraction in the PET yarn due to the low density of the aerogel.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.531-541
• /
• 2009

본 연구에서는 강도수준(30, 50 및 70 MPa)에 따른 고유동 자기충전 콘크리트의 수화발열 특성을 알아보기 위하여 2성분계 및 3성분계 고유동 자기충전 콘크리트를 제조하여 일반콘크리트와 수화열, 응결 및 역학적 특성을 분석 고찰 하였으며, 콘크리트에 사용된 분체에 대한 미소수화열량을 측정하여 얻은 분체의 열특성값, 간이단열온도실험을 실시하여 얻은 콘크리트의 열특성값 및 콘크리트에 사용된 재료의 일반적인 열특성값을 간편한 방법의 추정식을 이용하여 콘크리트 단열온도를 추정하였다. 또한, 온도해석에 의하여 얻어진 수화열 및 단열온도 특성값을 MIDAS CIVIL 06 프로그램을 이용하여 3차원 온도응력 해석을 실시하여 고유동 자기충전 콘크리트의 수화발열 특성 및 수화열에 의한 온도응력을 분석 고찰하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.115-116
• /
• 2013

Property of the compressive strength of high strength concrete was investigated in adiabatic temperature history considering hot-weather conditions. As a result, compressive strength of specimens subjected to high temperature history showed more than 120% at 3days of age compare to standard cured specimens. But, at 91days of age showed the incidence of strength less than 100%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.59-63
• /
• 2004

In recent days. it is necessary to find environment-friendly way of diposing industrial waste and reclying system. So this study will analyze the property of Porous concrete improved by concrete waste powder and recycled lightweight aggregate and then suggest the ways of reclying. The method deals with experimenting unit weight of capacity. thermal conductivity, compression and ultrasonic pluse velocity. Considering the relation between ultrasonic pluse velocity and unit weight & thermal conductivity through the graph. the result of relation between ultrasonic pluse velocity and unit weight & thermal conductivity on the graph expessed their high interaction shown as direct proportion on the graph. Recycled Porous concrete merits lightweight and adiabatic. Therefore. we will expect that the current using ALC and Recycled Porous concrete has be similar thermal conductivity.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1988-1992
• /
• 2010

4-Amino-1,2,4-triazole copper complex (4-ATzCu) was synthesized, and its thermal behaviors, nonisothermal decomposition reaction kinetics were studied by DSC and TG-DTG techniques. The thermal decomposition reaction kinetic equation was obtained as: $d\alpha$ / dt =$10^{22.01}$ (1-$\alpha$)[-ln(1-$\alpha$)]$^{1/3}$ exp($-2.75\times10^4$ /T). The standard mole specific heat capacity of the complex was determined and the standard molar heat capacity is 305.66 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ at 298.15 K. The entropy of activation $({\Delta}S^{\neq})$, enthalpy of activation $({\Delta}H^{\neq})$, and Gibbs free energy of activation $({\Delta}G^{\neq})$ are calculated as 171.88 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ 225.81 $kJ{\cdot}mol^{-1}$ and 141.18 $kJ{\cdot}mol^{-1}$, and the adiabatic time-to-explosion of the complex was obtained as 389.20 s.

• 소성∙가공
• /
• 제11권8호
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.