• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.437-442
• /
• 2004

The optimization of a blade sweep for a transonic axial compressor rotor (NASA rotor 37) has been performed using a response surface method and a Reynolds-averaged Wavier-Stokes (RANS) flow simulation. Two shape variables of the rotor blade, which are used to define a blade sweep, are introduced to increase an adiabatic efficiency. Data points for response evaluations have been selected by D-optimal design, and linear programming method has been used for an optimization on a response surface. The result shows that the adiabatic efficiency is increased to about 1 percent compared to that of the reference shape of the rotor blade. Relatively high increasement of the adiabatic efficiency is obtained between 20 and 60 percent span. In the present study, backward swept blade is more effective to increase the adiabatic efficiency In the axial compressor rotor.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.414-421
• /
• 1999

Falling film rectification involves simultaneous heat and mass transfer between vapor and liquid interface. In the present work, the adiabatic rectification process of ammonia-water vapor on the vertical plate was investigated. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer in each phases were investigated. The stripping of water in vapor mixture occurred new the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer in falling film.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.69-79
• /
• 2000

Falling film rectification involves simultaneous heat and mass transfer between vapor and solution film. In the present work, the adiabatic rectification process of ammonia-water vapor by the falling solution film on the vertical plate was investigated. The continuity momentum, energy and diffusion equations for the solution film and the vapor mixture were formulated in integral forms and solved numerically, The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer coefficient in each phases were investigated. The stripping of water in vapor mixture occurred near the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer coefficient in falling film.

• 천문학회보
• /
• 제36권1호
• /
• pp.55.2-55.2
• /
• 2011

Many astrophysical high energy phenomena involve relativistic flows. We describe codes for adiabatic and isothermal flows in relativistic regimes. For adiabatic flows, we employ an equation of state (EOS) which is simple and yet approximates very closely the EOS of the single-component perfect gas. For isothermal flows, we use an EOS of constant sound speed. We present the eigenstructures of relativistic hydrodynamics which can be used to build numerical codes, and discuss the calculation of primitive variables from conservative ones for both adiabatic and isothermal flows. The shock tube tests show differences between the two flows.

• 대한전자공학회논문지SD
• /
• 제41권3호
• /
• pp.101-108
• /
• 2004

단열회로를 이용하여 16-bit ALU와 단열회로에 4가지 위상을 가지는 전원클럭을 공급하기 위한 전원클럭 발생기를 설계하였다. 4개의 전원클럭 신호선의 전하는 AC 형태의 전원클럭을 통해서 복원되어 에너지 소모를 줄인다. 구현에 사용한 단열회로는 ECRL(efficient charge recovery logic) 형태를 기본으로 하였으며 0.35㎛ CMOS 공정을 사용하여 설계하였고 3.3V 전원을 사용하였다. 회로설계 후 layout을 진행하였으며, layout 후 LPE(layout parasitic extraction)를 수행하여 이를 모의실험에 사용하였다. 모의실험결과 전원클럭 발생기를 포함한 단열회로를 이용한 ALU는 동일한 구조를 갖는 기존의 CMOS ALU보다 1.15～1.77배 정도의 에너지소모를 감소 시켰다.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1519-1529
• /
• 1992

본 연구에서는 단열 전단 밴드의 특성 규명을 위하여 특별히 고안된 계단 형 상 시편(stepped specimen)의 수치해석을 통하여 단열 전단 밴드의 형성과 성장(init- iation and growth of adiabatic shear band)에 관한 체계적 해석을 시도해 보았다. 금번 논문에서는 우선 격자 크기(mesh size)와 충격 속도(impact velocity)가 단열 전 단 밴드의 형성 및 성장에 미치는 영향과 제반 특성을 규명할 계획이며 차후 재료의 기하학적 형상 등이 단열 전단 밴드의 형성 및 성장에 미치는 영향에 대해서도 단계적 연구를 시도할 계획이다. 해석을 위하여 가공경화효과, 변형률 속도 경화효과(stra- in rate hardening effect), 열적연화효과 등을 고려할 수 있는 구성 방정식(constit- utive equation)을 갖춘 엑스플리시트 시간적분 유한요소 코드(explicit time integr- ation finite element code)를 사용하였으며 기존의 연구 결과와는 달리 어떠한 인위 적 결함도 해석에 사용하지 않았다.

• 임산에너지
• /
• 제21권2호
• /
• pp.62-68
• /
• 2002

본 실험에서는 합판벽체내의 단열재 종류에 따른 단열성능을 비교 평가하였다. 열의 통과량을 비교해 보기 위하여 열관류 실험을 하였다. 열관류 실험결과 스티로폼과 유리섬유의 열관류율이 적게 나타났다. 용적비열은 황토보드와 집성목이 높은 결과를 나타내었다. 합판 벽체로 제작된 모형 주택을 이용한 실내외 온도변화를 비교해 본 결과 단열재료로스티로폼과 유리섬유를 사용한 벽체의 경우 외부 온도에 쉽게 영향을 받는 것을 알 수 있었으며 용적비열이 높은 황토보드, 황토ㆍ톱밥 혼합재, 집성목을 사용한 벽체의 경우는 외부온도의 변화에 비해 적은 온도변화를 보였다. 실험결과 열관류율은 스티로폼과 유리섬유가 작았지만 용적비열이 높은 황토보드와 황토ㆍ톱밥 혼합재, 집성목이 단열성능면에서 우수함을나타내었다.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.73-80
• /
• 2006

Present study is concerned with an experimental study on the cooling characteristics of heat-generating components arranged in channels which are made by printed circuit boards. To assess the thermal performance of the heat-generating components arranged by $5\times11$ in flow channel, three variables are used: the velocity of the fluid at the entrance, the height of channel, and row number of the component. The cooling characteristics of the heat-generating components such as the surface temperature rise, the adiabatic temperature rise, the adiabatic heat transfer coefficient, and the effect of thermal wake are compared with the result of the experiment and the numerical analysis. Based on the experiment analysis, some conclusions can be drawn: First of all, the experiment and numerical analysis are identical comparatively; the heat transfer coefficient increases as H/B decreases. Howeve., when H/B is over 7.2, the effect of H/B is rather trivial. The effect is the biggest at the first component from the entrance, and it decreases until the fully developed flow, where it becomes very consistent. The thermal wake function calculated for each row decreases as H/B increases.

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.714-719
• /
• 2007

본 연구에서는 적외선(Infra-Red) 카메라를 이용하여 원형 노즐을 통한 고속 제트 분사 시 수직 충돌 벽면에서 나타나는 정상상태(steady state)의 단열 벽면 온도를 2차원적으로 측정하였다. 출구 노즐 직경으로 표현된, Reynolds 수 187,000에서 노즐-평판간 거리 변화의 영향을 살펴보았으며, 측정된 단열 벽 온도는 회복 계수로 무차원화 하였다. 한편 열전대를 이용하여 측정한 단열 벽면 온도를 적외선 카메라를 이용한 측정 결과와 비교하여 검증하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.427-733
• /
• 2003

Adiabatic shear bands have been observed in the serrated chip during high strain rate metal cutting process of medium carbon steel and titanium alloy. The recent microscopic observations have shown that dynamic recrystallization occurs in the narrow adiabatic shear bands. However the conventional flow stress models such as the Zerilli-Armstrong model and the Johnson-Cook model, in general, do not predict the occurrence of dynamic recrystallization (DRX) in the shear bands and the thermal softening effects accompanied by DRX. In the present study, a strain hardening and thermal softening model is proposed to predict the adiabatic shear localized chip formation. The finite element analysis (FEA) with this proposed flow stress model shows that the temperature of the shear band during cutting process rises above 0.5T$\sub$m/. The simulation shows that temperature rises to initiate dynamic recrystallization, dynamic recrystallization lowers the flow stress, and that adiabatic shear localized band and the serrated chip are formed. FEA is also used to predict and compare chip formations of two flow stress models in orthogonal metal cutting with AISI 1045. The predictions of the FEA agreed well with the experimental measurements.