• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.262-264
• /
• 2005

This paper is concerned with a fracture strength study of composite adhesive lap joints. The tests were carried out on specimen joints manufactured hybrid stacked joints such as the polyester and bamboo natural fiber layer. The main objective of the work was to test the fracture strength using hybrid fiber composites with a polyester and bamboo natural fiber layer adjacent to the spew fillet of adhesive bonded joints and hybrid stacked joints. The results are presented using tensile-shear strength graph and finite element analysis. The failure mechanisms are discussed in order to explain that spew fillet at the end of the overlap reduces greatly the adhesive shear and effects the tensile-shear strength in hybrid stacked joints.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.208-213
• /
• 2002

When a thermoset conductive adhesive joints are subjected to the thermal cycles, the thermal stresses are developed around the joints. Most of in-plane, hi-axial components of these residual stresses induces large tensile peel stresses and weakens adhesive joints. Also these stresses vary with thermal cycles, and result in thermal fatigue loading and debonding propagation. In this study, the thermal ratchetting effect in conductive adhesive joints are evaluated by the finite element analysis with the viscoelastic material model. In order to Investigate the relationship between thermal ratchetting and glass transition temperature, the mathematical material model has been developed experimentally by dynamic mechanical analysis. These material models are implemented to the finite element analysis with thermal loading cycles. And the stress profiles around the conductive adhesive joints are calculated. It has been observed that the thermal ratchetting occurs when the maximum temperature of thermal cycles is above the glass transition temperature. The peel and shear stress components increase as the thermal loading time increases. This will contributes to thermal fatigue fracture of the joints.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.196-201
• /
• 2004

Adhesive joints have been widely used for fastening thin adherends because they can distribute the load over a larger area than mechanical joints, require no hole, add very little weight to the structure and have superior fatigue resistance. However, the fatigue characteristics of adhesive joints are much affected by applied pressure during curing operation because actual curing temperature is changed by applied pressure and the adhesion characteristics of adhesives are very sensitive to manufacturing conditions. In this study, cure monitoring and torsional fatigue tests of adhesive joints with an epoxy adhesive were performed in order to investigate the effects of the applied pressure during curing operation. From the experiments, it was found that the actual curing temperature increased as the applied pressure increased, which increased residual thermal stress in the adhesive layer. Therefore, the fatigue life decreased as the applied pressure increased because the mean stress during fatigue tests increased due to the residual thermal stress.

• Composites Research
• /
• 제16권4호
• /
• pp.51-58
• /
• 2003

접착 조인트의 안전성은 사용되는 열경화성 접착제의 경화상태에 많은 영향을 받기 때문에, 실시간으로 접착 조인트의 경화를 모니터링 할 수 있다면 조인트의 품질을 향상시킬 수 있다. 본 연구에서는 조인트의 경화 중 접학제의 소산계수를 측정하여 이를 접착제의 경화도로 환산할 수 있는 기법을 제안하였다. 접착제의 소산계수와 경화도의 관계를 실험적으로 연구하였으며, 온도와 경화도에 따라 민감하게 변하는 소산계수로부터 온도가 미치는 영향을 제거하였다. 연구결과 접착제의 소산계수는 그 경화율과 유사한 경향을 보임을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.67-71
• /
• 2005

This paper is concerned with a study on fracture strength of composites in an adhesive single lap joint. The tests were carried out on joint specimens made with hybrid stacked composites consisting of the polyester and bamboo natural fiber layer. The main objective of this work was to evaluate the fracture properties adjacent to adhesive bonded joint of natural fiber reinforced composite specimens. From the results, natural fiber reinforced composites have lower tensile strength than the original polyester. But tensile-shear strength of natural fiber reinforced composites with bamboo layer far from adhesive bond is as high as that of the original polyester adhesive bonded joints. Spew filet at the end of the overlap reduced the stress concentration at the bonded area. Spew fillet and position of bamboo natural fiber layer have a peat effect on the tensile-shear strength of natural fiber reinforced composites including adhesive bonded joints.

• Composites Research
• /
• 제19권3호
• /
• pp.29-36
• /
• 2006

섬유강화 복합재료는 적층각도와 적층순서에 따라 이방성을 가지기 때문에, 복합재료가 튜브형 접합부의 피접착체로 사용될 경우 지금까지 많이 수행된 등방성 피접착체를 가지는 접합부에 대한 해석을 통하여 복합재료 접합부의 거동을 예측하는 것은 한계가 있다. 본 연구에서는 접착제의 비선형 거동을 고려하여 복합재료 피접착체를 가지는 튜브형 접합부에 대한 비선형 해석을 수행하였다. 먼저 적층 복합재료 튜브에 대한 해석을 수행하였고, 이를 바탕으로 튜브형 접합부에 대한 비선형 방정식을 유도하였으며, 접착층의 응력 분포 및 접합부의 토크전달능력을 계산하였다. 복합재료 튜브의 적층순서와 접착길이가 접착층의 응력 분포 및 토크전달능력에 어떤 영향을 미치는 지 살펴보았으며, 또한 비선형 해석과 선형해석의 차이점을 비교하고 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1039-1044
• /
• 2003

Adhesive-bonded joints are widely used in the industry. Recently aircraft applications of adhesive bonding joints have been increased extensively in automobile and air industry. Because adhesives which are available for structural applications have been developed a lot and understanding of adhesive bonding has been improved so much. In this study, as the fundamental research of design of adhesive bonding joints, this study considers specimen shape are affect strength and durability of Al/Polymer lap joints. In this research, cross head speed difference were concerned to evaluate their effects on the adhesive strength. Cross head speed makes a change 0.05mm/min, 0.5mm/min, 5mm/min. The result is load-displacement diagram showed brittleness fracture tendency. Fracture tendency that is shown enough on stress distribution of trigonal single lap joint and trigonal edged single lap joint occur the inside of adhesive.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.567-571
• /
• 1997

Recently, automobile industry has led to increasing use of aluminum alloy for weight reduction. Automobile made of aluminum alloy can be given lighter, stronger and a harder surface by anodizing than one made of steel-alloy. In this paper, we investigate the influence of lap length, adherend thickness and adhesive thickness on adhesive strength of single-lap adhesive joints by conducting tensile-shear tests. Single-lap adhesive joints of aluminum was calculated using joint factor by using adhesive length, adherend thickness of specimen.

• Composites Research
• /
• 제21권4호
• /
• pp.22-28
• /
• 2008

복합재료 체결부는 전체 복합재 구조물의 성능을 결정하는 중요한 부분이므로, 체결부에 대한 해석과 강도평가는 매우 중요하다. 본 논문에서는 복합재 접착 체결부의 강도를 실험적으로 평가하고 분석하였으며, 구조해석으로 평가한 체결부의 강도와 상호 비교하였다. 접착 체결부의 강도예측을 위하여 최대 변형률 이론과 파손영역 이론을 사용하였으며, 비선형 유한요소 해석을 통해 제안된 파손영역비를 기준으로 접착 체결부의 파손강도를 예측할 결과, 최대 22.2% 범위 내에서 파손강도를 예측할 수 있었다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.62-67
• /
• 2012

In this study, the bonding strengths of adhesively bonded joints are experimentally investigated. A series of lap-shear tests are conducted using single lap type adhesive joints. In order to analyse the joint fabrication factors that affected the bonding strength, the parametric tests are conducted with various thickness of adhesive, surface roughness and fillet of adhesive. In addition, for the comparative study with the welded joint, lap-shear tests using specimens with 2 welded sides and 4 welded sides are also carried out. The quantitative results of the strength analysis are summarized, and some proposals are made on setting up testing standards for adhesively bonded joints.