• Journal of Adhesion and Interface
• /
• v.4 no.2
• /
• pp.10-20
• /
• 2003

This paper is relative to the electroless deposition of nickel or copper films on polyimide and polytetrafluoroethylene substrates. First, it is presented an original approach of the electroless process which consists in grafting nitrogenated functionalities on the polymer surfaces via plasma or VUV-assisted treatments operating in a nitrogen-based atmosphere ($NH_3$, $N_2$), and then in catalysing the grafted surfaces in an aqueous tin-free, Pd(+2)-based solution. Adhesion of the Pd(+2) catalytic species on polymer surfaces is explained by the formation of strong covalent bonds between these species and the grafted nitrogenated groups. Second, it is show how a fragmentation test performed in conjunction with electrical measurements can be used to characterize the practical adhesion of the electroless coatings deposited on flexible polymer substrates, and to evidence the influence of some experimental parameters (plasma treatment time and nature of the gas phase).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.4.1-4.1
• /
• 2011

Recently, circuit printing technology has been considered as a promising alternative to conventional PCB fabrication, for it can greatly reduce the manufacturing costs. Even though printed circuit has many advantages over typical subtractive technology such as fewer processes, it has some disadvantages. The major problems are low adhesion and poor resolution. Efforts to overcome these problems have been mainly focused on ink developments with a limited success. And surface treatments showed some improvements. Therefore, various plasma treatments and primer coatings on plastic substrates have been tested. Plasma treatments using hydrocarbon gases including methane and propane improved the pattern quality of the inkjet printed circuit, which are further improved upon heating of substrate. On the other hand, there is little effect on the adhesion, which is improved only by a special primer coating. The adhesion of inkjet printed circuit has been increased more than 10 times upon treatment. As for the screen printed circuits, the overall effects are less significant since there is some organic binder in the ink. Nonetheless, the treatment has strong positive effects on pattern quality and adhesion. The adhesion of 1 kgf/cm2, which is comparable with those of the conventional PCB circuits, is possible through primer coating for both screen and inkjet printed circuits. The resulting circuit also showed good thermal, mechanical and electrical properties.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.749-754
• /
• 2022

High adhesion and water resistance of the skin surface are required for wearable and skin-attachable electronic patches in various medical applications. In this study, we report a stretchable electronic patch that mimics the drainable structure pattern of the hexagonal channels of frog's pads and the sucker of an octopus based on carbon-based conductive polymer composite materials. The hexagonal channel structure that mimics the pads of frogs drains water and improves adhesion through crack arresting effect, and the suction structure that mimics an octopus sucker shows high adhesion on wet surfaces. In addition, the high-adhesive electronic patch has excellent adhesion to various surfaces such as silicone wafer (max. 4.06 N/cm²) and skin replica surface (max. 1.84 N/cm²) in dry and wet conditions. The high skin-adhesive electronic patch made of a polymer composite material based on a polymer matrix and carbon particles can reliably detect electrocardiogram (ECG) in dry and humid environments. The proposed electronic patch presents potential applications for wearable and skin-attachable electronic devices for detecting various biosignals.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.625-630
• /
• 2009

Embedding of active devices in a printed circuit board has increasingly been adopted as a future electronic technology due to its promotion of high density, high speed and high performance. One responsible technology is to embedded active device into a dielectric substrate with a build-up process, for example a chipin-substrate (CiS) structure. In this study, desmear treatment was performed before Cu metallization on an FR-4 surface in order to improve interfacial adhesion between electroless-plated Cu and FR-4 substrate in Cu via structures in CiS systems. Surface analyses using atomic force microscopy and x-ray photoemission spectroscopy were systematically performed to understand the fundamental adhesion mechanism; results were correlated with peel strength measured by a 90o peel test. Interfacial bonding mechanism between electrolessplated Cu and FR-4 substrate seems to be dominated by a chemical bonding effect resulting from the selective activation of chemical bonding between carbon and oxygen through a rearrangement of C-C bonding rather than from a mechanical interlocking effect. In fact, desmear wet treatment could result in extensive degradation of FR-4 cohesive strength when compared to dry surface-treated Cu/FR-4 structures.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.477-483
• /
• 2020

The rehabilitation methods used in existing concrete box structures rely on the method of attaching the repair material to the section of the structure with a spray equipment. In the case of ceiling or wall parts, the adhesion force to the repair material may be reduced by the gravity and dead load after construction. In subway structures, vibration causes a problem that reduces the initial adhesion. Supplementary measures are needed as the quality of repair varies depending on the worker's proficiency and construction environment. In this study, mechanical pressurization equipment was developed that can apply a certain pressure after construction of a repairwork to solve problems such as reduction of adhesion of repair materials by gravity and variation of repair quality by labor work. To find out the effect of the pressurized equipment, a chamber similar to the field conditions was constructed to measure the attachment strength different from the pressurized condition, the section, and the environmental conditions. The pressurization differed from the other parts, but the adhesion strength of up to 70% was increased.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.685-690
• /
• 2022

Recent research on soft adhesives has sought to understand in depth how their chemical or mechanical structures interact strongly with living tissues. The aim is to optimally address the unmet needs of patients with acute or chronic diseases. Synergy adhesion, which includes both electrostatic (hydrogen bonds) and mechanical interactions (capillary stress), appears to be effective in overcoming challenges related to long-term unstable bonds to wet surfaces. Here, we report electrostatic and mechanically synergistic mechanisms of adhesion without chemical residues. To infer the mechanism, a thermodynamic model based on custom combination adhesives has been proposed. The model supported experimental results that thermodynamically controlled swelling of hydrogels embedded in elastomeric structures improves biofluidic insensitive on-site adhesion to wet surfaces and improves detachment without chemical residues in the direction of peeling.

• Childhood Kidney Diseases
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2006

Osteopontin (OPN) is a glycosylated phosphoprotein which mediates cell adhesion and migration, and is produced by bone, macrophages, endothelial cells, and epithelial cells. The many regulatory functions of OPN include bone remodeling, tumor invasion, wound repair, and promotion of cell survival. It is produced by renal tubular epithelial cells, and expression is upregulated in glomerulonephritis, hypertension, ischemic acute renal failure, renal ablation, and UUO. In this review, we discuss about osteopontin in general aspect, expression, role on the development and pathologic condition of neonatal kidney.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2897-2901
• /
• 2012

Invasion is usually recognized as the main reason for the high recurrence and death rates of glioma and restricts the efficacy of surgery and other therapies. Therefore, we aimed to investigate the mechanism involved in promotion effects of mda-9/syntenin on human glioma cell migration. The wound healing method was used to test the migration ability of human glioma cells CHG-5 and CHG-hS, stably overexpressing mda-9/syntenin. Western blotting was performed to determine the expression and phosphorylation of focal adhesion kinase (FAK) and JNK in CHG-5 and CHG-hS cells. The migration ability of CHG-hS cells was significantly higher than that of CHG-5 cells in fibronectin (FN)-coated culture plates. Phosphorylation of FAK on tyrosine 397, 576, and 925 sites was increased with time elapsed in CHG-hS cells. However, phosphorylated FAK on the tyrosine 861 site was not changed. Phosphorylated Src, JNK and Akt levels in CHG-hS cells were also significantly upregulated. Phosphorylation of JNK and Akt were abolished by the specific inhibitors SP600125 and LY294002, respectively, and the migration ability of CHG-hS cells was decreased, indicating that the JNK and PI3K/Akt pathways play important roles in regulating mda-9/syntenin-induced human brain glioma migration. Our results indicate Mda-9/syntenin overexpression could activate FAK-JNK and FAK-Akt signaling and then enhance the migration capacity of human brain glioma cells.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.601-611
• /
• 1998

Ion irradiation is a very promising tool to modify the chemical structure and physical properities of polymers. This study was aimed to evaluate the cellular adhesion to ion beam-irradiated surface of biodegradable poly-l-lactide(PLLA) membrane. The PLLA membrane samples were irradiated by using 35 KeV $Ar^+$ to fluence of $5{\times}10^{13}$, $5{\times}10^{14}$ and $5{\times}10^{15}\;ion/cm^2$. Water contact angles to control and each dose of ion beam-irradiated PLLA membranes were measured. Cultured fetal rat calvarial osteoblasts were seeded onto control and each dose of ion beam-irradiated PLLA membranes and cultured. After 24 hours, each PLLA membranes onto which osteoblasts attached were examined by scanning electron microscopy(SEM). Osteoblasts were removed from each PLLA membrane and then, the vitality and the number of cells were calibrated. Alkaline phosphatase of detached cells from each PLLA membranes were measured. Ion beam-irradiated PLLA membranes showed no significantly morphological change from control PLLA membranes. In the measurement of water contact angle to each membrane, the dose range of ion beam employed in this study reduced significantly contact angles. Among them, $5{\times}10^{14}\;ion/cm^2$ showed the least contact angle. The vitalities of osteoblastes detached from each membranes were confirmed by flow cytometer and well attached cells with their own morphology onto each membranes were observed by SEM. A very strong improvement of the cell adhesion and proliferation was observed for ion beam-irradiated surfaces of PLLA membranes. $5{\times}10^{15}\;ion/cm^2$ exhibited the most strong effect also in cellular adherence. ALPase activities also tended to increase in ion beam-irradiated membranes but statistical differences were not found. These results suggested that ion beam irradiation is an effective tool to improve the adhesion and spreading behaviour of the cells onto the biodegradable PLLA membranes for the promotion of membrane-tissue integration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.569-576
• /
• 2007

Four hundred and fifty tilapias ($6.77{\pm}0.23$ g) were assigned randomly to six groups to evaluate the feasibility of the tested antibacterial peptides (ABPs) and oligosaccharides as substitutes for antibiotics. The control group was fed with a commercial tilapia diet; other five groups were fed with the same commercial diet supplemented with konjac glucomannan (KGLM), cluster bean galactomannan (CBGAM), and three animal intestinal ABPs derived from chicken, pig and rabbit at 100 mg/kg respectively. After 21 days of feeding, growth, disease resistance, and in vivo anti-adherence were determined. Furthermore, the inhibitory effect of tested agents on adhesion of Aeromonas veronii biovar sobria (A.vbs) strain BJCP-5 to tilapia enteric epithelia in vitro was assessed by cell-ELISA system. As a result, the tested agents supplemented at 100 mg/kg show significant benefit to tilapia growth and disease resistance (p<0.05), and the benefit may be correlated with their interfering in the contact of bacteria with host mucosal surface. Although none of the tested agents did inhibit the growth of BJCP-5 in tryptic soy broth at $100{\mu}g/ml$, all of them did inhibit the adhesion of A.vbs to tilapia enteric epithelia in vivo and in vitro. In vitro mimic assays show that three ABPs at low concentrations of $25{\mu}g/ml$ and $2.5{\mu}g/ml$ have the reciprocal dose-dependent anti-adherence effect. The inhibition of ABPs may be correlated with a cation bridging and/or receptor-ligand binding, but not with hydrophobicity. The KGLM and CBGAM inhibited the adherence of BJCP-5 to tilapia enteric epithelia with dose-dependent manner in vitro, and this may be through altering bacterial hydrophobicity and interfering with receptor-ligand binding. Our results indicate that the anti-adherence of the tested ABPs and oligosaccharides may be one of the mechanisms in promoting tilapia growth and resistance to A.vbs.