• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.157-160
• /
• 2005

The surface energies and acid-base interaction between the untreated and treated Jute or Hemp fibers and different matrix compositions of polypropylene-maleic anhydride polypropylene copolymers (PP-MAPP) were investigated using dynamic contact angle measurement. The contribution of the acid-base property into the interfacial adhesion of the natural fibers/matrix systems were characterized by calculating the work adhesion coming from the acid-base interaction. On the other hand, microfailure mechanism of both single Jute and Hemp fiber bundles were investigated using the combination of single fiber tensile test and acoustic emission. Distinctly different micro failure modes of the different natural fiber/polypropylene systems wet ε observed using optical microscope and determined indirectly by AE and their FFT analysis.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.35-40
• /
• 2000

Teflon-like fluorocarbon thin film was deposited on various substrates by vapor deposition using PFDA (perfluorodecanoic acid). The fluorocarbon films were characterized by static/dynamic contact angle analysis, VASE (Variable-angle Spectroscopic Ellipsometry) and AFM/LFM (Atomic/Lateral Force Microscopy). Based on Lewis Acid/Base theory, the surface energy ($S_{E}$) of the films was calculated by the static contact angle measurement. The work of adhesion (WA) between de-ionized water and substrates was calculated by using the static contact data. The fluorocarbon films showed very similar values of the surface energy and work of adhesion to Teflon. All films showed larger hysteresis than that of Teflon. The roughness and relative friction force of films were measured by AFM and LFM. Even though the small reduction of surface roughness was found on film on $SiO_2$surface, the large reduction of relative friction farce was observed on all films. Especially the relative friction force on TEOS was decreased a quarter after film deposition. LFM images showed the formation of "strand-like"spheres on films that might be the reason far the large contact angle hysteresis.

• 접착 및 계면
• /
• 제10권4호
• /
• pp.174-181
• /
• 2009

고 고형분 점착제의 점도 개선을 위해 seed 중합을 이용하여 수용성 저점도 점착제를 중합하였다. Seed 바인더 중합 중 최적 중합 조건을 산출하고, 점착제 중합 시 seed 바인더와 acrylic acid의 함량을 변화시켜 점도변화와 피착면에 대한 점착박리강도를 측정하여 다음과 같은 결과를 얻었다. 점착제 중합에서 seed 바인더의 함량이 7 wt%/monomer일 때 60%의 고형분에서 2,100 cps의 낮은 점도를 나타내고 평활한 점착제 필름을 제조할 수 있었다. Acrylic acid함량 변화에 따른 기계적 물성 측정에서는 4 wt%/monomer의 acrylic acid를 사용 했을 때 우수한 점착박리강도와 유지력을 나타내었다.

• Elastomers and Composites
• /
• 제49권3호
• /
• pp.245-252
• /
• 2014

폴리올, 이소시아네이트, 2-HEMA 및 기타 아크릴레이트 단량체들로부터 제조된 폴리우레탄 접착제의 FT-IR측정과 물성을 검토하였다. 폴리우레탄 접착제의 연화점, 점도, 접착강도 및 기계적 물성들이 각각 링과볼법, Brookfield 점도계 및 만능시험기를 이용하여 검토되었다. 실험 결과에 의하면 PPG 함량 및 부틸아크릴레이트 함량이 증가함에 따라 연화점, 접착강도, 인장강도 및 100% modulus 값 등은 감소하는 것을 보여준다. 하지만 2-HEMA 및 MDI량이 증가할수록 인장강도 및 100% modulus값 등은 증가하였으며 점도와 NCO함량 등도 또한 증가하였다.

• Journal of Periodontal and Implant Science
• /
• 제35권4호
• /
• pp.851-861
• /
• 2005

The nature of the implant surface can directly influence cellular response, ultimately affecting the rate and quality of new bone tissue formation. The aim of this in vitro study was to investigate if human osteoblast-like cells, Saos-2, would respond differently when plated on disks of magnesium titanate and machined titanium. Magnesium titanate disks were prepared using Micro Arc Oxidation(MAO) methods. Control samples were machined commercially pure titanium disks. The cell adhesion, proliferation and differentiation were evaluated by measuring cell number, and alkaline phosphatase(ALPase) activity at 1 day and 6 day after plating on the titanium disks. Measurement of cell number and ALPase activity in Saos-2 cells at 1 day did not demonstrate any difference between machined titanium and magnesium titanate. When compared to machined titanium disks, the number of cells was reduced on the magnesium titanate disks at 6 day, while ALPase activity was more pronounced on the magnesium titanate. Enhanced differentiation of cells grown on magnesium titanate samples was indicated by decreased cell proliferation and increased ALPase activity.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.30-36
• /
• 2014

Many different cells types have been found to be highly sensitive to mechanical force imposed by their surroundings. The cellular response to external mechanical forces has very important effects on numerous biological phenomena. In spite of its importance in biological processes, the cell adhesion force remains difficult to measure quantitatively at the cellular level. In this paper, to enhance quantitative measurements of cell adhesive interactions, a new attaching system and a method in which a glass bead can be attached to an AFM cantilever was designed and fabricated, and the degree of range displacement was controlled in the system. In an experiment, the movement of the stage in the attaching system and the attaching process were measured. The effectiveness of this system was confirmed as well in the experiment. In addition, through a commercial AFM system, the spring constant of the modified AFM probe could be measured.

• 한국표면공학회지
• /
• 제19권3호
• /
• pp.92-108
• /
• 1986

An electroplating on the lead frame fabricated from domestic copper plate was studied experimentally. In this study, nickel was plated on the thin copper lead frame and silver layer was coated on the nickel film in the cyanide electrolyte. The effect of process variables such as current density, plating time, coating thickness and flow rate of electrolytic solution on the properties of coating was investigated. Some samples on each step were fabricated during electroplating. The results obtained from polarization measurement, observation of SEM photograph, adhesion test of coating and microhardness test are as follows. On silver plating, polarization resistance of potentiostatic cathodic polarization curve is reduced as the flow rate of Ag electrolytic solution increases. And above resistance is also reduced when the minor chemicals of sodium cyanide and sodium carbonate are added in potassium silver cyanide bath. The reduced polarization resistance makes silver deposition on the cathode easy. An increase in the current density and the coating thickness causes the particle size of deposit to coarsen, and consequently the Knoop microhardness of the coating decreases. On selective plating an increase in the flow rate of plating solution lead to do high speed plating with high current density. In this case, the surface morphology of deposit is of fine microstructure with high Knoop hardness. An increasing trend of the adhesion of coating was shown with increasing the current density and flow rate of electrolytic solution.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.28-34
• /
• 2004

The polarizing film application exploits the unique physicochemical properties between PVA(Poly vinyl alcohol) film and CTA(Cellulose triacetate) film. However, hardly any research was aimed at improving the adhesion characteristics of the CTA film by radio frequency(RF) plasma treatment at argon(Ar) gaseous state. In this report, we deal with surface treatment technology for protective CTA film developed specifically for high adhesion applications. After Ar plasma, surface of the films is analyzed by atomic force microscopy(AFM), roughness parameter and peel strength. Furthermore, the wetting properties of the CTA film were studied by contact angle analysis. Results obtained for CTA films treated with a glow discharge showed that this technique is sensitive to newly created physical functions. The roughness and peel strength value increased with an increase in treatment time for initial treatment, but showed decreasing trend for continuous treatment time. The result of contact angle measurement refer that the hydrophilicity of surface was increased. AFM studies indicated that no considerable change of surface morphology occurred up to 3 minutes of treatment time, but a considerable uneven of surface structure resulted from treating time after 5 minutes.

• 접착 및 계면
• /
• 제2권1호
• /
• pp.9-17
• /
• 2001

전기저항 측정법과 인장 및 압축 시험을 이용하여, 탄소섬유/에폭시 복합재료의 정화특성과 계면물성을 평가하였다. 계면이 존재하지 않는 탄소섬유 자체만을 사용했을 경우에는 경화 초기와 최종단계의 저항차이는 없었으며, 계면이 존재하는 탄소섬유/에폭시 시편의 경우에는 매트릭스 경화 수축에 의해 저항차가 크게 나타났다. 인장 하충하의 저항 변화 측정에서, 전기증작된 시편은 섬유의 첫 파단에 의해 저항이 무한대로 도달하는 시간이 미처리에 비해 다소 지연되는 현상을 보였다. 인장 및 압축 시험에서 표면처리된 시연은 미처리섬유에 비해 계면전단 강도가 현저히 크게 증가하였다. 인장의 경우, 미처리 섬유에서는 debonding 형태, 그리고 표면처리된 섬유에서는 cone 형태의 판단이 관찰되었다. 압축에서는 부러진 섬유 끝에서 대각선으로 미끄러지는 파단 현상이 두 경우 모두에서 나타났는데, 미처리섬유는 창 끝과 같은 예리한 파단이 일어나며, 전기증착된 섬유는 다소 둔한 판단이 나타났다. 이를 통해 전기증착에 의한 표면처리가 계면접착력과 미세파괴구조에 인장 및 압축하에서 각각 다른 영향을 주는 것을 확인하였다.

• 접착 및 계면
• /
• 제7권2호
• /
• pp.1-11
• /
• 2006

미처리 Jute와 Hemp섬유와 처리된 Jute와 Hemp섬유가 강화된 polypropylene-maleic anhydride-g-polypropylene copolymer (PP-MAPP) 복합재료의 계면 물성을 미세역학시험법과 동적접촉각 측정을 통해서 평가하였다. Jute와 Hemp섬유의 통계적인 인장강도의 경우 두 형태 와이블 분포가 단일 형태 분포보다 더 일치하는 것을 확인할 수 있었다. 천연섬유 복합재료의 계면전단강도(IFSS)에 대한 산-염기 상호작용변수는 접착일($W_a$)의 계산을 통해 그 특성을 기술 할 수 있다. 천연섬유에 대한 알칼리, 실란커플링제의 영향은 PP-MAPP 기지재의 MAPP 함량을 변화시킴으로써 얻을 수 있었다. 알칼리 처리된 Jute와 Hemp섬유의 경우 약한 계면층이 모두 제거되고 표면적이 증가됨으로 인해 표면에너지는 더 증가하였다. 반면 실란 커플링제를 이용하여 표면 처리된 Jute와 Hemp 섬유의 경우 차단된 높은 에너지의 기들로 인해 표면에너지는 감소하였다. PP-MAPP기지재속의 MAPP의 함량증가는 산-염기 기의 도입으로 인해 표면에너지는 증가하였다. 두 천연섬유 복합재료의 미세파괴 형상은 두 섬유의 인장강도가 다르기 때문에 명확히 구분되었다.