• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.629-633
• /
• 2021

This article is designed to look into the radiation exposure dose to each body part and the shielding effect for workers using an additional shielding to reduce their radiation exposured by scattering radiation which is generated in a space between the operating table and lead curtain during interventional radiology(IR) procedures. After placing a human phantom on the table of SIEMENS' angiography machine, the following measurements were taken, depending on the presence of an additional shield of lead equivalent of 0.25 mmPb, manufactured for this purpose: dose to gonad, dose to an area where the personal dosimeter is placed, and dose to an area of eye lens is located. An ion chamber(chamber volume 1,800 cc) was utilized to measure scattering radiation. The two imaging tests were carried out as follows: fluoroscopy of the abdomen (66 kV, 100 mA, 60 seconds) and of the head (70 kV, 65 mA, 60 seconds); and digital subtraction angiography(DSA) of the abdomen (67 kV, 264 mA, 20 seconds) and of the head (79 kV, 300 mA, 20 seconds). In all the experiments, the shielding efficiency of the gonad position was the largest at 59.8%. In case an additional shielding was used as protection against scattering radiation that came through the operating table and the lead curtain during an IR, the radiation shielding efficiency was estimated to be up to 59.8%, leading to a conclusion that its presence may effectively reduce the radiation exposure dose of medical staffs.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.317-327
• /
• 2015

Many construction projects have extensively adopted building information modeling (BIM), and various institutions and standards have been developed domestically in Korea. However, the current process that is used to calculate building space area has a significant shortcoming in that there are two different laws to apply the method of measurement considering space boundaries for building element guidelines. For example, space area can be calculated by a polygon, which is modeling using a BIM-based computer aided design program, such that the space polygon is always exported as an inner-edge type. In this paper, we developed an automated algorithm to convert coordinates of space representation using industry foundation classes based BIM data. The proposed algorithm will enable engineers responsible for space management to use a BIM-based model directly in the space programming process without having to do additional work. The proposed process can help ensure that space area is more accurately and reliably.

• Journal of the Korean housing association
• /
• v.26 no.2
• /
• pp.13-20
• /
• 2015

Single household is expected to be the typical form of future Korean elderly household from reduction of household size and rapid growth of the elderly. As Japanese solve the same problem with Senior Sharehouse, a case study on Senior Sharehouse in japan focused on the Spatial Arrangement and Spatial Composition could suggest an potential applications in Korea. In conclusion, compare to Korea, the Senior Sharehouse in Japan supplies additional $7.5{\sim}9.3m^2$ more space to support the physical movement of the elderly and to help the elderly to solve various functions at one space. The independence and privacy of residents are also assured by supplying single occupancy. Space analysis shows that public space is as spacious (47.3~55%) as personal space. The result of the Space analysis suggests that the sharehouse provides rational ratio of space to assure residents' independence. It was supposed that the center type would be the main stream of the Spatial Arrangement for sharehouse considering its characteristic of sharing space. But, the Senior Sharehouse in Japan prefers corner type. The guarantee of personal space is being considered as a important characteristic. As a result of case analysis, Senior Sharehouse can be a proper type of house for single elderly household and present study can be used for the baseline data to solve the residence problem for single elderly household in Korea.

• Journal of The Korean Astronomical Society
• /
• v.48 no.5
• /
• pp.237-255
• /
• 2015

The Interferometric Monitoring of Gamma–ray Bright Active galactic nuclei (iMOGABA) program provides not only simultaneous multifrequency observations of bright gamma–ray detected active galactic nuclei (AGN), but also covers the highest Very Large Baseline Interferometry (VLBI) frequencies ever being systematically monitored, up to 129 GHz. However, observation and imaging of weak sources at the highest observed frequencies is very challenging. In the second paper in this series, we evaluate the viability of the frequency phase transfer technique to iMOGABA in order to obtain larger coherence time at the higher frequencies of this program (86 and 129 GHz) and image additional sources that were not detected using standard techniques. We find that this method is applicable to the iMOGABA program even under non–optimal weather conditions.

• Journal of The Korean Astronomical Society
• /
• v.51 no.2
• /
• pp.27-36
• /
• 2018

In a solar coronagraph, the most important component is an occulter to block the direct light from the disk of the sun. Because the intensity of the solar outer corona is $10^{-6}$ to $10^{-10}$ times of that of the solar disk ($I_{\odot}$), it is necessary to minimize scattering at the optical elements and diffraction at the occulter. Using a Fourier optic simulation and a stray light test, we investigated the performance of a compact coronagraph that uses an external truncated-cone occulter without an internal occulter and Lyot stop. In the simulation, the diffracted light was minimized to the order of $7.6{\times}10^{-10}I_{\odot}$ when the cone angle ${\theta}_c$ was about $0.39^{\circ}$. The performance of the cone occulter was then tested by experiment. The level of the diffracted light reached the order of $6{\times}10^{-9}I_{\odot}$ at ${\theta}_c=0.40^{\circ}$. This is sufficient to observe the outer corona without additional optical elements such as a Lyot stop or inner occulter. We also found the manufacturing tolerance of the cone angle to be $0.05^{\circ}$, the lateral alignment tolerance was $45{\mu}m$, and the angular alignment tolerance was $0.043^{\circ}$. Our results suggest that the physical size of coronagraphs can be shortened significantly by using a cone occulter.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.381-388
• /
• 2000

The steel piers and the concrete-filled steel piers, in spite of reasonable strength, high ductility, small section, and fast construction, have not been considered as the alternatives to the RC piers even in the highly populated urban area where aseismic safety, limited space and fast construction are indispensably required. In this paper, a steel pier and 4 box type concrete-filled steel piers were tested with the quasi-static cyclic loading to estimate the ductility and the strength. Additional devices such as base rib, turn-buckle, and anchor bolted added at the to increase the ductility with minimum additional cost. The result showed that the concrete filled-in steel piers had higher energy absorbtion and strength than steel piers had, but also showed that slight overlooking in the design and fabrication could lead to the abrupt fracture just after small local buckling at the bottom.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.867-870
• /
• 1998

Video data is usually stored in a compressed format in order to reduce the storage space. For efficient browsing, searching, and retrieval of compressed video sequences, size-reduced images (or DC images which are formed with block DC coefficients) are generally preferred to avoid unnecessary computational complexity. In this paper, we propose a DC image extraction scheme appropriate for scene analysis and efficient browsing of compressed video sequences. The proposed algorithm utilizes predicted low frequency AC coefficients to achieve better approximation and to reduce the error drift. Due to the AC prediction based on a quadratic surface model, the proposed scheme requires no additional memory compared with the previous zero-order or first-order approximation scheme. Simulation results show that the proposed scheme achieves better subjective and objective quality with minor additional operations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.525-529
• /
• 2004

A novel translational 3-dof parallel mechanism is proposed and analyzed. The mechanism consists of three RRPS serial subchains and an additional passive 3-dof type serial subchain. Three RRPS serial subchains alone may form a structure of the 6-DOF Stewart Platform mechanism. However, in the proposed mechanism, an additional passive serial subchain acts as constraints to restrict the output motion of the mechanism in 3-DOF translational space. The closed form position solutions of the proposed mechanism and its first-order kinematic model are derived. Then its workspace size and kinematic characteristics are examined via kinematic isotropic index.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.520-524
• /
• 2004

In this work, a novel spherical 3-dof parallel mechanism is proposed and analyzed. The mechanism consists of three RRPS serial subchains and an additional passive 3-dof type serial subchain. Three RRPS serial subchains alone may form a structure of 6-DOF Stewart Platform mechanism. However, in the proposed mechanism, an additional passive serial subchain acts as constraints to restrict the output motion of the mechanism within 3-DOF spherical space. The closed form solutions of position analysis of the proposed mechanism and its first-order kinematic model are derived. Then its workspace size and kinematic characteristics are examined via kinematic isotropic index.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.615-623
• /
• 2008

This paper proposes an $H_{\infty}$ controller design method for Takagi-Sugeno (T-S) fuzzy systems using a fuzzy basis-function-dependent Lyapunov function. Sufficient conditions for the guaranteed $H_{\infty}$ performance of the T-S fuzzy control system are given in terms of linear matrix inequalities (LMIs). These LMI conditions are further used for a convex optimization problem in which the $H_{\infty}-norm$ of the closed-loop system is to be minimized. To facilitate the basis-function-dependent Lyapunov function approach and thus improve the closed-loop system performance, additional decision variables are introduced in the optimization problem, which provide an additional degree-of-freedom and thus can enlarge the solution space of the problem. Numerical examples show the effectiveness of the proposed method.