• 보존과학회지
• /
• 제31권1호
• /
• pp.13-20
• /
• 2015

목조문화재는 수분의 영향으로 열화의 가속화가 진행되기 때문에 전통적으로 표면을 수분으로부터 차단하기 위해 들기름 및 동유와 같은 유지류를 도포하였다. 그러나 목조문화재에 적합한 유지류 코팅 방법 및 성능에 대한 체계적인 연구가 부족한 실정이다. 본 연구는 천연 유지류 3종과 오일스테인 2종의 목재의 방향별, 공시재의 시간 경과 및 유지류의 중탕 여부에 따른 방수 성능을 평가하여 현장 적용 가능성을 판단하였다. 건전 목재의 섬유방향에서 상온의 천연유지류 코팅제 방수성능은 대조군과 비교하여 약 79.2%를 차단하였으며, 특히 동유는 90.5%의 수분을 차단할 정도로 우수한 성능을 나타냈다. 2년간 실내에서 컨디셔닝을 실시한 경우 유지류의 방수 성능은 약 8.8% 감소하였다. 유지류를 중탕하여 사용할 경우 약 5.0%의 방수 성능이 향상되며, 특히 아마인유는 중탕하여 사용할 경우 약 9.6%의 방수 성능을 개선할 수 있다.

• Steel and Composite Structures
• /
• 제8권6호
• /
• pp.491-510
• /
• 2008

This paper presents a plan and guidelines that were drawn for Korean based research carried out on the fire-resistance of CFT columns. This research was carried out by reviewing the Korean regulations related to the fire-resistance of CFT columns and examining studies which had been made in Korea as well as overseas. The first phase of the study plan was to compare the fire-resistance of square CFT columns without fire protection (obtained through fire-resistance tests and numerical analyses) with estimated values (obtained through fire-resistance design formulas proposed in Korea and overseas). This comparison provided conclusions as outlined below. Fire-resistance tests conducted in this study proved that, when the actual design load is taken into consideration, square CFT columns without fire protection are able to resist a fire for more than one hour. A comparison was made of test and analysis results with the fire-resistance time based on the AIJ code, the AISC design formula and the estimation formula suggested for Korea. The results of this comparison showed that the test and analysis results for specimens SAH1, SAH2-1, SAH2-2 and SAH3 were almost identical with the AIJ code, the AISC design formula and estimation formula. For specimens SAH4 and SAH5, the estimation formula was more conservative than the AIJ code and the AISC design formula. It was necessary to identify the factors that have an influence on the fire-resistance of CFT columns without fire protection and to draw fire-resistance design formulas for these columns. To achieve this, it is proposed that numerical analyses and tests be conducted in order to evaluate the fire-resistance of circular CFT columns, the influence of eccentricity existing as an additional factor and the influence of the slenderness ratio of the columns. It is also suggested that the overall behavior of CFT structures without fire protection within a fire be evaluated through analysis simulation.

• 대한한방소아과학회지
• /
• 제32권2호
• /
• pp.64-71
• /
• 2018

Objectives The purpose of this study is to examine the correlation of antibiotics administration duration and antimicrobial resistance by reviewing domestic and foreign literatures. Methods We searched literatures dated up to 23 February, 2018 in PubMed and Cochrane Library using terms of "Anti-Bacterial Agents", "Carrier State", "Nasopharynx", "Drug Administration Schedule", and also searched via RISS (Research Information Service System), KISS (Koreanstudies Information Service System), DBpia (DataBase Periodical Information Academic) using terms of antibiotics, resistance, and dose. Results In comparison with shortened and standard antibiotic course, longer treatment duration is associated with greater antimicrobial resistance or non-significant difference, but we cannot find literature that shortened antibiotic course increases antimicrobial resistance on human nasopharyngeal flora. Conclusions Currently, there is no evidence that completing the standard antibiotic course reduces antimicrobial resistance. It can be a strategy for reducing antibiotic use to apply Korean medicine treatment, as well as short-course antibiotic therapy or delayed antibiotic prescription. Additional well-designed trials should be conducted in domestic and foreign settings about the appropriate duration of antibiotic therapy.

• The Plant Pathology Journal
• /
• 제23권4호
• /
• pp.300-307
• /
• 2007

Previously, a chloroplast-localized Cu,Zn superoxide dismutase (chCu,ZnSOD) was isolated from lily and the sense- and antisense- sequences of the lily chCu,ZnSOD were used to transform potato plants. Two selected lines, the sense- and anti-sense strand of transgenic plants, were further characterized for resistance to Erwinia carotovora, which is a severe pathogen affecting potato plants. Only the sense-strand transgenic potato, which contained less $O_2^{.-}$ and more $H_2O_2$ than wild-type and antisense-strand transgenic plants, showed increased resistance to E. carotovora. Additional studies using $O_2^{.-}$ or $H_2O_2$ scavengers in wild-type, sense-strand, and antisense-strand transgenic plants suggest that resistance to E. carotovora is induced by reduced $O_2^{.-}$ and is not influenced by $H_2O_2$. To the best of our knowledge, this report is the first study suggesting that resistance to E. carotovora is enhanced by reduced $O_2^{.-}$, and not by increased amounts of $H_2O_2$.

• 대한전자공학회논문지SD
• /
• 제38권5호
• /
• pp.375-381
• /
• 2001

디바이스의 크기가 0.25㎛이하로 축소됨에 따라 DRAM(Dynamic Random Access Memory) 제조업체들은 칩 크기를 줄이고 지역적인 배선으로 사용하기 위해서 기존의 텅스텐-폴리사이드 비트-선에서 텅스텐 비트-선으로 대체하고 있다. 본 논문에서는 다양한 RTP 온도와 추가 이온주입을 사용하여 낮은 저항을 갖는 텅스텐 비트-선 제조 공정에 대해 다루었다. 그 결과 텅스텐 비트선 저항에 중요한 메계변수는 RTP Anneal 온도와 BF₂ 이온 주입 도펀트임을 알 수 있었다. 이러한 텅스텐 비트-선 공정은 고밀도 칩 구현에 중요한 기술이 된다.

• 한국주조공학회지
• /
• 제18권3호
• /
• pp.283-288
• /
• 1998

Interest in rapid solidification of magnesium alloys stems from the fact that conventional ingot metallurgy alloys exhibit poor strength, ductility, and corrosion resistance. Such properties can be improved by microstructural refinement via rapid solidification processing. In this study, Mg-Zn alloys have been produced as continuous strips by melt overflow technique. In order to evaluate the influence of additional elements on the grain refinement and mechanical properties, Th and Zr were added in rapidly solidified Mg-5wt%Zn alloy. Then the microstructual observations were undertaken with the objective of evaluating the grain refinement as function of the cooling rate and the additional elements. The tremendous increase in hardness of Mg-Zn base alloys was mainly due to the refinement of the grain structure by the effect of rapid solidification and alloying elements. The formation of intermetallic phases on the grain boundaries may have a positive effect on the corroion resistance. Therefore, despite competition from many other developments, the rapid solidification processing of magnesium alloys emerges as a valuable method to develop superior and commercially acceptable magnesium alloys.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.287-293
• /
• 2001

A fast and easy PCR-SSCP method was developed and assessed for the early detection of rifampin-resistant Mycobacterium leprae in skin biopsy samples from Korean leprosy patients. The 190 bp of the rpoB gene, in which mutation is known to cause resistance to rifampin, was amplified by PCR and then analyzed by SSCP and DNA sequencing, All PCR products showing mobility shift on PCR-SSCP contained mutations, demonstrating that this method can be used for an early diagnositic method to detect a putative rifampin-resistant M. leprae strain. DNA sequence analysis revealed that 19 of 34 patient samples contained M. leprae strains with missense mutations in the rpoB gene: five were the same mutations previously reported to cause rifampin resistance and eight were the new type of mutatios that likely cause rifampin resistance. These newly identified dmutations, whose all five cytosine bases of four amino acids were substitued with thymine, were found at different sites from those reported in Mycobacterium tuberculosis or M. leprae. Therefore, they may provide additional clues to understand the molecular biological basis on the rifampin resistance of M. leprae.

• 대한조선학회논문집
• /
• 제50권2호
• /
• pp.95-103
• /
• 2013

Prediction of the running posture is important to evaluate the resistance by the numerical calculation for a high speed vessel. Especially for a planing craft having a large variation of running attitude it becomes more essential, but it can not be obtained easily because the running posture and the hydrodynamic forces including the resistance are interacted with each other. So iterative calculation to obtain the dynamic forces according to the changes in attitude is necessary, in this study, considering the calculated hydrodynamic force at the assumed draft as the additional buoyancy the corrected draft is calculated through satisfying the equilibrium between the buoyancy and the hull weight. To verify the derived method three kinds of hull forms were used with the results of model tests, R/V ATHENA and 150 tons class guide vessel for middle-speed semi-planing crafts, 28 feet fast boat for a high-speed planing boat. For all cases with several iterations the converged value of draft can be obtained, lastly the resistance and flow around hull were simulated by using VOF method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.345-350
• /
• 2001

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. 1T-CT specimen was used to obtain fracture resistance curves. But the fracture resistance curve by the 1T-CT specimen was very conservative to evaluate the integrity of the structure. And fracture resistance curve was affected by the specimen geometry and crack plane orientation. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the 1T-CT specimen and to provide the additional safety margin. For these, the fracture tests using the real pipe specimen and standard 1T-CT specimen test were performed. 4-point bending jig was manufactured for pipe test and direct current potential drop method was used to measure the crack extension and length for pipe test. From the pipe and the 1T-CT specimen test results, it was observed that the J-integral of the 1T-CT specimen test at the crack initiation point was very small compare to that of the pipe specimen test.

• 한국분무공학회지
• /
• 제24권4호
• /
• pp.203-208
• /
• 2019

In general, the oxi-nitriding method is well known as such a surface treatment way for substantial enhancement in corrosion resistance, even comparable to that of titanium. However, there are still lacks of information on thermal performance of the oxi-nitriding surface being of additional compound layers on the base substrate. Above all, the quantitative measurement of its thermal performance still was not evaluated yet. Thus, the present study experimentally measures the thermal resistance of the oxi-nitriding surface during droplet evaporation and then estimates heat transfer performance with the use of the onedimensional heat transfer model in vertical direction. From the experimental results, it is found that the total evaporation time slightly increased with the thermal resistance caused by the oxi-nitriding layer, showing a maximum difference of approximately 20% with that of the bare surface. Although the heat transfer performance of oxi-nitriding surface became slightly lower than that of the bare surface, the oxi-nitriding surface exhibits much better heat transfer performance compared to titanium.