• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.423-427
• /
• 2017

In this paper, an anchor design that improves bonding strength uniformity in the silicon-on-glass (SOG) process is presented. The SOG process is widely used in conjunction with electrode-patterned glass substrates as a standard fabrication process for forming high-aspect-ratio movable silicon microstructures in various types of sensors, including inertial and resonant sensors. In the proposed anchor design, a trench separates the silicon-bonded area and the electrode contact area to prevent irregular bonding caused by the protrusion of the electrode layer beyond the glass surface. This technique can be conveniently adopted to almost all devices fabricated by the SOG process without the necessity of additional processes.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.3
• /
• pp.149-152
• /
• 2011

Purpose: The Akin osteotomy which is a closing wedge osteotomy of the proximal phalanx widely used for the correction of hallux valgus has several methods of fixation. we tried to report the effects of the fixation using an absorbable suture material during the Akin osteotomy for the hallux valgus. Materials and Methods: This study was based on 448 cases of 346 patients who were able for follow-up more than 12 months among the patients who had an Akin osteotomy together with the surgery of hallux valgus between March of 2006 and May of 2010. Absorbable suture material had been used in all cases. Radiologically displacement and union of osteotomy site were observed after the surgery, and clinically postoperative complication such as skin irritation, pain and satisfaction were investigated. Results: Radiologically all cases had showed complete union and no case had the loss of an correction due to loss of fixation. Also, any case had no skin irritation due to a knot. Three cases had a medial cortical breakage due to a strong knot, and the initial one case among them had additionally fixed the osteotomy site for four weeks using K-wire, and the remaining two cases had fixed a suture on an articular surface without any fixation of an additional wire. If a medial cortical bone was lost by carrying out an ostectomy due to proximal protrusion of proximal phalanx, three cases could show union through the fixation of suture on an articular surface. Conclusion: This study considers that the fixation of the osteotomy site using an absorbable suture material in an Akin osteotomy was effective method and the advantage of this procedure was unnecessity of the material removal and no skin irritation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.523-531
• /
• 2008

Maxillary molar distalization is a treatment approach for patients with Class II malocclusions who do not require extractions and mesial movements of mandibular molars. The pendulum appliance is effective for distalization of the maxillary molars and independent of patient cooperation. This appliance can stabilize the maxillary premolars and use the palatal rugae area as an additional anchorage. However, caution is needed to control collateral effects, including increase of lower facial height, incisor protrusion and damage to the rugae area. This article reports the cases in which maxillary molar distalization achieved by pendulum appliance resolves the space problems and corrects the molar relationships.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.11-21
• /
• 2012

Purpose: Mulliken's method allows for normal nasal and lip growth, which in turn forms a natural shape of the philtrum. Therefore, we used a modified Mulliken's method to correct unilateral and bilateral cleft lip nasal deformities and followed the patients for 10 years. Methods: Ninety-one patients, who had undergone repair of unilateral and bilateral cleft lip and nasal deformity simultaneously using Mulliken's method during the time period from June 1997 to June 2009, were enrolled into this study. To follow-up of the growth of the lips and nose after the operation, the following 5 anthropometric measurements were analyzed: nasal tip protrusion, columellar length, upper lip height, cutaneous lip height, and vermilion mucosa height. Results: Using this method, we obtained a result that there was no significant difference in the development of the lip compared to the normal control group, and that the bilateral cleft lip patients' nasal projection and columellar length was shorter than that in normal persons. Both measures were statistically significant. Conclusion: Mulliken's method is a superb surgical technique, which enables the normal development of the nose and lip, which further allows for the innate philtrum appearance. The author's result does not seem to be meaningful, because the normal rate of nasal growth is slow before adolescence; however, we recommend additional follow-up and accordant treatment, if needed, once the nasal growth is complete.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.715-717
• /
• 2011

Purpose: In cases of breast reconstruction with a free transverse rectus abdominis musculocutaneous (TRAM) flap after skin-sparing mastectomy with nipple-areolar complex (NAC) removal, the flat contour of the flap's skin paddle can easily look unnatural and dissatisfying. Reconstructed NAC on the flap surface lacks the elevated contour that the normal areola possesses, resulting in an unnatural final result. Therefore, we would like to introduce a novel method to improve this problem and report the satisfactory results we obtained. Methods: Operations were conducted on 19 patients who underwent immediate breast reconstruction with a free TRAM flap and skin-sparing mastectomy from January 2009 to January 2010, with a mean follow-up of nine months. While the TRAM free flap was being inset, a purse-string suture was carried out on the dermal layer of skin flap to create a slight protrusion with Gore-$Tex^{(R)}$ sutures. Results: The elevated mound surrounding the NAC was well maintained for an average follow-up period of nine months. Nipple projection was also well maintained. There was no complaint about breast contour or nipple height reduction. In addition, there was no reported incidence of other complications. Conclusion: The purse-string suture technique presents a more natural breast silhouette around the NAC and helps to maintain nipple projection. Furthermore, it does not require any supplementary incisions or complicated skills. There has been no report of additional complications using this technique.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.1-5
• /
• 2018

Elastic resistive pressure sensor is fabricated by a direct spray coating of silver nanowires (AgNWs) on uncured polydimethylsiloxane (PDMS) and an additional coating of a conductive polymer, poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT:PSS). To improve the sensitive and stability, we have fabricated sandwich-structured AgNW/polymer sensor where two AgNW/polymer-coated PDMS films are laminated with the conducting surfaces contacted by pressure lamination. It shows a resistance decrease upon loading due to the formation of dense network of AgNWs. It is demonstrated that the sandwich-structured AgNW/polymer sensor exhibits very high sensitivity ($2.59kPa^{-1}$) and gauge factor (37.8) in the low pressure regime. It can also detect a subtle placement and removal of a weight as low as 3.4 mg, the corresponding pressure of which is about 5.4 Pa. It is shown that the protrusion of AgNWs from PDMS is suppressed substantially by the over-coated PEDOT:PSS layer, thereby reducing hysteresis and rendering the sensor more stable.

• The Korea Journal of Herbology
• /
• v.34 no.5
• /
• pp.1-12
• /
• 2019

Objectives : The consumption of licorice is large in Korea, but domestic production is insufficient due to the lack of adaptability. This study aimed to provide a morphological basis for adding interspecific hybrid licorice with improved adaptability to pharmacopoeia. Methods : This study was to establish identification criteria for the original plants, external and internal morphology of the authentic herbal medicines (Glycyrrhiza uralensis, G. glabra and G. inflata), market products and artificially interspecific hybrid forms of licorice. For this purpose, previous studies were investigated and visual and histological observations were carried out. We focused on the internal morphology by microscopic observation for securing objectivity. Finally, we proposed the identification keys for precise classification of each part. Results : 1) Original plant : Licorice species in the compendium were distinguished by the number of leaflets, presence of hair on the fruit, curvature and swelling of the fruit. 2) External morphology : Licorice species were distinguished by degree of powderiness, tearing gap, radial structure in the cross section and existence of protrusion of outer epidermis. 3) Internal morphology : Licorice species were distinguished by the degree of development of phloem fiber bundle, development of obliterated sieve, whether the secondary medullary ray are branched. In the case of interspecific hybrids, the characteristics of both species used for hybridization were mixed in all observation methods. Conclusions : These results suggest that the interspecific crossbred licorice is suitable for the pharmacopoeial standard. Therefore, it can be applied as a herbal medicine through additional supplementary study.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2008

Purpose: The common deformity after the correction of unilateral cleft lip nasal deformity is nasal asymmetry, and it is caused by the hypoplasia of the pyriform aperture. To correct this, many procedures have been applied, but still many problems are present. Authors performed the inlay and onlay insertion of porous high density polyethylene sheet(1 mm thickness $Medpor{(R)}$ sheet) in the hypoplastic pyriform margin of cleft side and obtained satisfactory results. Methods: 11 cases were performed and the mean follow up period was 15.1 months. Their mean age was 23.6 years. Under general anesthesia, bilateral pyriform margin was exposed. $Medpor{(R)}$ sheets in "match stick" like shaped were inlay inserted, and kidney shaped were onlay inserted fixating with two 6 mm titanium screws. After the surgery, the results was evaluated by photogrammetric analysis. On the basal view, the distance from the subalare and labiale superius' to the transverse baseline connecting the both cheilions was measured from the cleft side and the non-cleft side. Then, the postoperative symmetry was assessed by obtaining the cleft side against the non-cleft side as proportion index, defined as lateral and medial upper lip contour index. Results: There were 2 infections. The cause was because the inserted implant was too long and thus protruded to the base of nasal cavity. The lateral upper lip contour index was from 95.49 to 103.27, and medial upper lip contour index was from 90.92 to 100.49, it was statistically increased, and thus the symmetry was improved. However clinically mild depression remained at nostril floor. Conclusion: Authors performed porous high density polyethylene sheet inlay and onlay insertion for the hypoplasia of the pyriform margin in unilateral cleft lip nasal deformity. It was found that depressed pyriform margin and upper lip were corrected effectively except for the nostril floor, for which an additional soft tissue augmentation would be necessary. The inlay insertion has risk of protrusion, thus the guideline of the use of artificial prosthesis should be observed strictly.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.512-522
• /
• 1999

Background: Due to the paucity of suitable donor organs for lung allotransplantation, a number of techniques have been developed to improve the lung preservation. Ultrastructural studies of the morphologic changes of the flushing, preservation and reperfusion injury in donor lungs have rarely been reported. Methods: Adult dogs (n=46) were matched as donors and recipients for the single lung transplantation. The donor lungs were preserved after flushing with preservation solution and transplanted after 20-hours of preservation at $10^{\circ}C$. Ultrastructural features of the lung were examined after flushing, preservation and 2 hours after lung transplantation (reperfusion) respectively. Results: Electron microscopy after flushing showed focal alveolar collapse and mild swelling of type I epithelial cells. After preservation both type I epithelial cells and endothelial cells were swollen and destroyed focally. The endothelial cells showed protrusion of tactile-like structures into the lumina, blebs or vacuoles of the cytoplasm After reperfusion the lung tissue showed fibrin material in the alveoli, prominent type I epithelial cell swelling with fragmented cytoplasmic debris and marked endothelial cell swelling with vacuoles or tactile-like projections. The alveolar macrophages showed active phagocytosis. Scanning electron microscopic examination of the pulmonary parenchyma showed focally alveolar collapse and focal consolidation after the preservation and more prominent changes after the reperfusion procedure. The lungs preserved with low potassium dextran glucose solution, with additional prostaglandin $E_1(PGE_1)$ and verapamil(VP) showed relatively well preserved ultrastructures compared with those which were preserved with modified Euro-Collins or University of Wisconsin, and with additional $PGE_1$ and/or VP. Conclusion: The ultrastructural changes associated with flushing were mild in severity, the donor lungs were injured during the preservation, and further damage was occurred during the reperfusion. The reperfusion injury resulted in prominent pulmonary parenchymal alterations with a pattern of acute lung injury.