• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3232-3236
• /
• 2012

하부지반이 점토인 기존 제방 상단의 확폭을 위해 추가성토를 하는 경우에 대하여 추가성토에 의한 압밀과 사면안정 대책공법에 대해 검토하였다. 압밀량평가에 대해서는 추가성토에 의해 하부지반으로 전달되는 응력전달량을 탄성론에 근거하여 유도한 식을 적용하였다. 사면안정대책공법으로는 현장여건을 고려하여 JSP 공법과 쇄석기둥 공법 그리고 EPS공법을 고려하였는데 EPS공법을 적용한 해석결과에 따르면 안정조건을 만족하지 못했다. JSP 공법 적용시 약 $2{\times}10^7$ kPa의 고압을 사용하므로 시공시 인접지반의 압출에 대한 고려가 선행되어야 한다. 쇄석기둥공법의 경우 국내에서 시공실적이 적고 시공중 소음이 큰 단점이 있으므로 이러한 점들을 고려하여 현장여건에 적합한 공법의 선정이 필요할 것으로 생각된다.

• 한국터널지하공간학회 논문집
• /
• 제23권1호
• /
• pp.37-45
• /
• 2021

터널의 갱구부는 토피가 얕고 지반의 아칭효과가 발휘되기 어렵기 때문에 터널 시공 시 주의가 필요한 구간이다. 공용 중인 터널 갱구부 상부에 추가적인 성토가 이루어진다면 터널 안정성을 크게 저해할 수 있다. 따라서 본 연구에서는 터널 상부의 추가 성토에 따른 터널 안정성을 검토하고자 지반조건별로 성토 높이에 따른 수치해석을 수행하였다. 해석 결과 5등급 암반에서 성토 높이가 12 m 이상인 경우에는 숏크리트의 허용 휨압축응력, 록볼트의 허용 축력을 초과하는 것으로 나타났다. 발생되는 변위와 소성영역의 범위, 지보재의 상태를 종합적으로 고려할 때 터널 갱구부 상부에 추가 성토되는 높이가 10 m를 초과하는 경우에는 터널 안정성이 크게 저해되는 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2410-2415
• /
• 2011

매년 증가하는 교통량과 물동량으로 인해 기존 도로의 성토폭을 넓혀야 하는 경우가 빈번하게 발생한다. 본 연구에서는 추가 성토로 인해 기존 성토체 하부지반에 전달되는 연직응력 산정식을 유도하고자 하였다. 유도과정을 통해 평면변형률 지반조건에 대한 이론적 배경을 검토하여 보았다. 해석에서 고려한 응력함수는 적합조건 및 경계조건을 만족함을 알 수 있었다. 유도된 연직응력 산정식을 적용함에 있어 주의점을 살펴보았고 계산예를 통해 산정식의 신뢰성을 확인하였다.

• Smart Structures and Systems
• /
• 제31권5호
• /
• pp.517-529
• /
• 2023

Using a device composed of two lateral pressure plates (LPPs) and a steel reinforcement bar to apply horizontal pressure on slope surfaces, a newly developed prestress-reinforced embankment (PRE) is proposed, to which can be adopted in strengthening railway subgrades. In this study, an analytical model, which is available of calculating additional confining stress (σ_H) at any point in a PRE, was established based on the theory of elasticity. In addition, to verify the proposed analytical model, three dimensional (3D) finite element analyses were conducted and the feasibility in application was also identified and discussed. In order to study the performance of the PRE, the propagation of σ_H in a PRE was analyzed and discussed based on the analytical model. For the aim of convenience in application, calculation charts were developed in terms of three dimensionless parameters, and they can be used to accurately and efficiently predict the σ_H in a PRE regardless of the embankment slope ratio and LPP side length ratio. Finally, the potential applications of the proposed analytical model were discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1036-1041
• /
• 2008

In order to analysis the reason of sliding failure in embankment slope under construction in soft soil area, a model section located in Gimhae Region in Gyeongsangnam-Do, where the sliding failure had been occurred during embankment works in soft soil area, had been selected. This area had been firstly treated with the Pack Drain Method, and additional embankment works of 9.7 meters out of total 14 meters in thickness had been under construction. The results of analysis showed that the reason of sliding failure were overspeed in embankment construction and the overestimation of design factors in calculating strength of each layer of embankment and poor management and inaccuracy reading of measurement devices.

• 한국지구과학회지
• /
• 제29권6호
• /
• pp.447-453
• /
• 2008

최근 제체 등의 수자원시설물에 대한 안정성 검토를 위해 전기비저항 탐사가 많이 수행되고 있다. 본 연구에서는 전기비저항 조사를 통해 제체의 안정성을 검토하고자할 때, 제체의 3차원 형상에 의한 효과를 정확히 분석하여야만 손상 구간을 파악할 수 있음을 제시하고자 한다. 이의 검토를 위해 3차원 전기비저항 모델링을 통해 3차원 형태의 제체 모양을 수치모델로 구현하고, 제체 내부의 상태에 따른 겉보기 비저항과 역산 결과를 분석하였다. 또한 실제 3차원 곡면 형태를 가진 제체에서 전기비저항 탐사를 수행하여 그 결과를 분석하였다. 그 결과, 단순히 2차원으로 해석하였을 때 이상대로 추정되었던 구간이, 실제로는 3차원 곡면에 의한 기하학적 효과였음이 밝혀졌으며, 3개월 뒤에 수행된 우기의 추가 조사와 추후 일부 굴착을 통하여 제체의 내부가 안전한 상태임을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1988년도 학술세미나 강연집
• /
• pp.3-67
• /
• 1988

Model studies on the response of homgeneous earth embankment dams subjected to strike-slip fault movement have been penomed via centrifuge and finite element analysis. The centrifuge model tests have shown that crack development in earth embankment experiences two major patters: shear failure deep inside the embankment and tension failure near the surface. The shear rupture zone develops from the base level and propagates upward continuously in the transverse direction but allows no open leakage chnnel. The open tensile cracks develop near the surface of the embankment, but they disappear deep in the embankment. The functional relationship has been developed based on the results of the centrifuge model tests incorporating tile variables of amount of fault movement, embankment geometry, and crack propagation extent in earth des. This set of information can be used as a guide line to evaluate a "transient" safety of the duaged embankment subjected to strike-slip fault movement. The finite element analysis has supplemented the additional expluations on crack development behavior identified from the results of the centrifuge model tests. The bounding surface time-independent plasticity soil model was employed in the numerical analysis. Due to the assumption of continuum in the current version of the 3-D FEM code, the prediction of the soil structure response beyond the failure condition was not quantitatively accurate. However, the fundamental mechanism of crack development was qualitatively evaluated based on the stress analysis for the deformed soil elements of the damaged earth embankment. The tensile failure zone is identified when the minor principal stress of the deformed soil elements less than zero. The shear failure zone is identified when the stress state of the deformed soil elements is at the point where the critical state line intersects the bounding surface.g surface.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1306-1311
• /
• 2006

Most of design parameters of Railway Structures are determined by the serviceability requirements, rather than the structural safety requirements. The serviceability requirements come from Ensuring of Running Safety and Ride Comfort of Train, Reduction of Track Maintenance Work Track-Bridge Interaction should be considered in the design of railway structures. In this study, a numerical method which precisely evaluate an axial force in rail and a rail expansion and contraction when turnout exist in succession on a CWR on a ballasted or on a ballastless track of bridge is developed. From the parameter studies using the developed method, additional stress of stock rail almost 25% is generated due to stock and lead rail interaction, even embankment not bridge. In case of ballasted track, additional stress of stock rail on bridge is very greater than on embankment, and therefore require detailed review in bridge design with turnout. Stresses of turnout rails on bridge are very sensitive according to the installed positions. In case of ballastless track, Stresses of turnout rails are similar as those of normal track

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.283-303
• /
• 2015

To research and analyze the differential settlements of foundations specifically, site investigations of existing railways and metro were firstly carried out. Then, the centrifugal test was used to observe differential settlements in different position between foundations on the basis of investigation. The theoretical model was established according to the stress diffusion method and Fourier method to establish an analytical solution of embankment differential settlement between different foundations. Finally, theoretical values and experimental values were analyzed comparatively. The research results show that both in horizontal and vertical directions, evident differential settlement exists in a limited area on both sides of the vertical interface between different foundations. The foundation with larger elastic modulus can transfer more additional stress and cause relatively less settlement. Differential settlement value decreases as the distance to vertical interface decreases. In the vertical direction of foundation, mass differential settlement also exists on both sides of the vertical interface and foundation with larger elastic modulus can transfer more additional stress. With the increase of relative modulus of different foundations, foundation with lower elastic modulus has larger settlement. Meanwhile, differential settlement is more obvious. The main error sources in theoretical and experimental values include: (a) different load form; (b) foundation characteristics differences; (c) modulus conversion; (d) effect of soil internal friction.

• Geomechanics and Engineering
• /
• 제3권2호
• /
• pp.117-130
• /
• 2011

The methods of design available for geocell-supported embankments are very few. Two of the earlier methods are considered in this paper and a third method is proposed and compared with them. In the first method called slip line method, plastic bearing failure of the soil was assumed and the additional resistance due to geocell layer is calculated using a non-symmetric slip line field in the soft foundation soil. In the second method based on slope stability analysis, general-purpose slope stability program was used to design the geocell mattress of required strength for embankment. In the third method proposed in this paper, geocell reinforcement is designed based on the plane strain finite element analysis of embankments. The geocell layer is modelled as an equivalent composite layer with modified strength and stiffness values. The strength and dimensions of geocell layer is estimated for the required bearing capacity or permissible deformations. These three design methods are compared through a design example. It is observed that the design method based on finite element simulations is most comprehensive because it addresses the issue of permissible deformations and also gives complete stress, deformation and strain behaviour of the embankment under given loading conditions.