• ETRI Journal
• /
• v.35 no.1
• /
• pp.146-149
• /
• 2013

We propose a reconciliation sublayer (RS)-based lane and traffic control protocol for energy-efficient 40-G/100-G Ethernet. The RS performs active/inactive lane control and data rate adaptation depending on active lane information received from the upper layer. This protocol does not result in a processing delay in the media access control layer, nor is an additional buffer required at the physical layer for dynamic lane control. It ensures minimal delay and no overhead for the exchange of control frames and provides a simple adaptive data rate.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.8
• /
• pp.369-374
• /
• 2006

Due to development of internet network environments and data compression techniques, the size and amount of multimedia data has greatly increased. They are compressed before transmission or storage. Dealing with these compressed data such as video retrieval or indexing requires decompression procedure in most cases. This causes additional computations and increases the processing time. In various applications a histogram is one of the most frequently used tools. Efficiency of extracting such histograms will drop down if decompression is involved. We propose a novel scheme for extracting histograms from images that are transformed into the compressed domain by 8x8 DCT(Discrete Cosine Transform). In this scheme an averaged version of original image is obtained by a simple linear combination of DCT coefficients with the sets of coefficients we designed.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.694-699
• /
• 2014

In mobile ad-hoc networks (MANET), the network topology and neighboring nodes change frequently, since MANET is composed of nodes that have mobility without a fixed network infrastructure. The AODV routing protocol is advantageous for MANET, but AODV has a delay in the transmission of data packets because AODV can not transmit data during route recovery. This paper proposes solving the above problem of AODV by using a bypass generation mechanism for data transmission during route recovery. For further improvement, additional mechanisms that coordinate the reception threshold of a hello packet are proposed in order to improve the accuracy of the information obtained from the neighboring nodes when the bypass is generated due to a link failure and the immediacy of the route recovery. Simulation results show that the proposed technique improves the performance in terms of the delay in transmission compared to traditional AODV.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4703-4723
• /
• 2016

The verification of data integrity is an urgent topic in remote data storage environments with the wide deployment of cloud data storage services. Many traditional verification algorithms focus on the block-oriented verification to resolve the dispute of dynamic data integrity between the data owners and the storage service providers. However, these algorithms scarcely pay attention to the data verification charge and the users' verification experience. The users more concern about the availability of accessed files rather than data blocks. Moreover, the data verification charge limits the number of checked data in each verification. Therefore, we propose a mixed verification protocol to verify the data integrity, which rapidly locates the corrupted files by the file-oriented verification, and then identifies the corrupted blocks in these files by the block-oriented verification. Theoretical analysis and simulation results demonstrate that the protocol reduces the cost of the metadata computation and transmission relative to the traditional block-oriented verification at the expense of little cost of additional file-oriented metadata computation and storage at the data owner. Both the opportunity of data extracted and the scope of suspicious data are optimized to improve the verification efficiency under the same verification cost.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1246-1251
• /
• 2011

In this paper, BPSK-OFDM-based LED communication systems are applied to watermarking techniques, were studied on how to transfer the additional information data with at the same time as the transfer of LED communication data. For watermarking kasami code was used as spreading codes, and spread additional data is controlled by small signal level to be BPSK-OFDM does not affect the optical signal. BPSK-OFDM is added to an optical signal is transmitted. The performance of the spreading code as a kasami code is autocorrelation of the noise-free environment, under the noise environment was confirmed by autocorrelation. BPSK-OFDM-based LED communication system has been applied proposed technique throughout the simulation in analyzed to BER of BPSK-OFDM DER performance and watermark signal level according to signal size level of data. That was availability confirmed for watermarking data transmit techniques data as being analysis detection performance of watermarking information using LED communication according to the code.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1921-1929
• /
• 1997

This paper describes a direct transmission method of multimedia data stream between a multimedia data processor and a communication interface without using system memory. I propose the direct transfer method of multimedia data through the single data path, without additional data path between a multimedia data processor and a communication interface in multimedia platforms. The hardware architecture and functions for the direct transfer method is defined. Procedure to transfer multimedia data to and from the multimedia data processor is described by means of control flow chart. Comparing the proposed method with general methods, I show that the proposed method can decrease number of bus accesses and bus cycles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1356-1363
• /
• 2016

In this paper, we propose a novel error detection algorithm for LZ78-compressed data. The conventional error detection method adds a certain number of parity bits in transmission, and the receiver checks the number of bits representing '1' to detect the errors. These conventional methods use additional bits resulting in increased redundancy in the compressed data which results in reduced effectiveness of the final compressed data. In this paper, we propose error detection algorithm using the structural properties of LZ78 compression without using additional bits in the compressed data. The simulation results show that the error detection ratio of the proposed algorithm is about 1.3 times better for error detection than conventional algorithms.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2422-2429
• /
• 2011

The main function of station is supplying the convenient environment to the passengers as a vehicle waiting place. Smart station is networked based on the station which has been combined with additional functions like effective operation and real time monitoring and power control. Smart station network for the operation has been concerning about the communication security and the data transmission distance between vehicle and station. Smart station can be useful for the ubiquitous data communication place where the people can use their personal communication instruments very easily and quickly. This is the smart station.

• Tribology and Lubricants
• /
• v.27 no.3
• /
• pp.156-161
• /
• 2011

The rectangular waveguide technique can be used to measure the complex permittivity of dielectric material of various thickness and cross section. This paper presents the analysis system of engine oil permittivity at which deterioration of engine oil is measured at the X-band(8-12.5 GHz). The middle of the rectangular waveguide has engine oil case and is connected with VNA(Vector Network Analyzer) for the measurement of the transmission$(S_{21})$ and reflection$(S_11)$ and then the permittivity is extracted. The deterioration of engine oil is proved by the comparison with both the extracted data and reference data. As the additional research, This paper suggest that an accurate permittivity is considered by not only the wave guide length but the air gap between oil case and the waveguide.