• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.51-57
• /
• 2010

In this paper, It propose methods compressing BTC image utilizing data hiding technique. BTC is used to compress general digital image into binary image and applied into application such as printer. Additional information, transferred with binary image, is as big as the size of binary image. Therefore, we wish to reduce the total transmission bandwidth by decreasing the additional information with sustaining the small image degradation. Because typical BTC image doesn't have enough space for data hiding, we adopt Adaptive AMBTC (Absolute Moment BTC) algorithm to produce the binary image, and calculate virtual histogram from created binary image and modify this histogram for reducing the additional information. The proposed algorithm can reduce about 6-11 % of the image file size, compared with the existing BTC algorithm, without making perceptible image degradation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1589-1596
• /
• 2017

In synchronous secure communications, a synchronization signal is transmitted over the same channel where ciphertext is transmitted for cryptographic synchronization between an encryptor and a decryptor, so, it causes data rate lowering and transmission delay for plain communication. Especially, in poor environments such as wireless channels and so on, since secure communications require a periodic resynchronization protocol, synchronization signal transmission method can dominate its quality. In this paper, we proposed a new synchronization signal transmission method without additional bandwidth as well as resynchronization protocol based on it. We embeded a synchronization signal as a watermark in a transmission image and restored it from a detected watermark in the decryptor. Experimental results of image have demonstrated that the proposed synchronization signal transmission method using watermarking is efficient in transmission rate and can support reliable synchronization detection.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.403-408
• /
• 2010

The sensor nodes can be installed in the environment in which the temperature change is considerable, such as desert, urban, and data center. Particularly, because the output power becomes less than the targeted power if a temperature is increasing, link quality is degraded and packet losses are occurred. In order to compensate the temperature changes, existing schemes detect the change of the link quality between nodes and control transmission power through a series of feedback process. However, these approaches can cause heavy overhead by additional control packets. In this paper, we propose the T2PC(Temperature-aware Transmission Power Control) to keep up the link quality despite temperature variation. At each node, T2PC compensates the attenuated link quality by controlling the transmission power based on the local temperature measurement. In addition, the packet reception ratio can be improved with less control packets than ones required in existing transmission power control methods based on the feedback control.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2222-2224
• /
• 2001

This paper presents the implementation of an efficient car tracking system based on Inverted DGPS (IDGPS) using mobile phone and internet for data communication link. The IDGPS technique, which may provide the same level of accuracy as DGPS, is subject to degradation in real time applications when transmission time delays occur in the communication links. Therefore, an effective communication system is the key element for successful application of the IDGPS. The combination of internet and mobile phones provides a high data rate, unlimited communication packet size, flexible data structure, and wide coverage without additional communication devices. An implementation of such a data link system is described. Field test results are included to evaluate the performance of the proposed system.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.7-14
• /
• 2015

In this paper, we derive the outage probability for M-ary phase shifting keying (MPSK) and M-ary quadrature amplitude modulation (MQAM) burst transmission (BT) of adaptive decode-and-forward (ADF) cooperative relay systems over quasi-static Rayleigh fading channels. Within a burst, there are pilot symbols and data symbols. Pilot symbols are used for channel estimation schemes and each relay node's transmission mode selection schemes. At first, we focus on ADF relay systems in which the probability density function (PDF) is derived on the basis of error events at relay nodes corresponding to channel estimation errors. Next, the average outage probability is derived as an approximate expression for an arbitrary link signal-to-noise ratio (SNR) for different modulation orders. Its accuracy is demonstrated by comparison with simulation results. Further, it is confirmed that BT-ADF relay systems with pilot symbol based channel estimation schemes enables to select correctly decoded relay nodes without additional signaling between relay nodes and the destination node, and it is verified that the ideal performance is achieved with small SNR loss.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.138-152
• /
• 2007

A communication system based on DATEX-ASN, an international communication protocol for use in COSMOS, a real-time traffic responsive signal system of Seoul, was developed in this study. Through laboratory experiments, it was identified that some additional rules were necessary for its successful application to COSMOS and thus proper complementary rules were devised. Laboratory experiments were to measure error-rates of monitoring information packet, EOC duration and operating cycle-length errors at different data transmission rates and the results of each experiment were compared each other. The results show that the DATEX-ASN protocol requires a transmission rate of at least 9,600bps which is higher than a transmission rate of 4,800bps required by NTCIP.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.1
• /
• pp.177-187
• /
• 2022

Theoretical literature agrees on the interaction between financial instability and economic activity but explains it's dynamic in two points of view: one is that the transmission mechanism occurs in one unique regime and the other reckons a shift of regime leads to the alteration of the transmission mechanism. This study aims to find evidence of the multi-regime transmission for ASEAN developing countries. The author employs the technique of Threshold vector auto regression using the financial stress index standing for financial instability. Monthly data is collected, covering a period long enough with many episodes of high stress in recent decades. There are two conclusions: (1) A financial shock has a negative and stronger impact on economic activity during a high-stress period than it does during a low-stress period; (2) the response of economic activity to a negative financial shock during high-stress periods is stronger than it is during normal times. The findings point to the importance of the financial stress index as an additional early warning indicator for the real economy sector, as well as the positive effect that a reduction in financial stress may have on economic activity, implying the importance of "unconventional" monetary policy in times of high financial stress.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.369-374
• /
• 2015

In this study, by combining a unique purpose and additional aspects of ultrasonic transmission media, a development potential on a new ultrasonic transmission media was sought. The rheological characteristics and the manufacturing cost for each manufactured formulation were compared and analysed with ready-made. An ultrasonic transmission media is to have different functional characteristics according to the following formulation, it was the best in rheological value, low viscosity emulsion with the oil gel. Polymer hydro gel is can be manufactured at low cost compared to other formulations. Emulsion which shows a sharp viscosity difference according to the components of oil and water had a big difference in manufacturing cost. This study can be utilized as the fundamental data on the ultrasound transmission media equipped with expertise in various areas of ultrasound.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2869-2885
• /
• 1996

There werer many researches on the switch system for high speed netowrk such as B-ISDN and the server system for the multimedia services respectively. But, in case of simple connection of these two systems, we have to suffer the bottlenck problem of data transmission, and pay the wasteful expenditure because of duplicated architecture of both systems such as interconnecting network at the switch and the server. Therefore, we propse the unified architecture of switehces and servers, which can be used as switches and servers simultaneously. This is based on the hybercube structure. The links are used iterconnection network of switch system, and each node has the subscriber subsystem and the server subsystem. The proposed architecure has the benifits as follows; the easy espansion of capacity due to the scalability,the simple system development and maintenance because of the equivalance of each nodes, the high reliability against the fault of nodes and links due to the existence of the many alternative links between nodes, the easy flow and QoS managment due to the non-blocking data transmission between any two nodes, the flexible adaptation for additional new services owing to simple insertion server board to node. In this paper, we present overal configuration and node component of proposed architecture, and the procesing flow for the various services.