• Korean Journal of Medicinal Crop Science
• /
• v.8 no.2
• /
• pp.123-128
• /
• 2000

This study was carried out to determine factors affecting on the mass propagation of Rehmannia glutinosa seedlings in bioreactor culture. Air-lift type bioreactor was more compatible to shoot formation than stirrer type. Fifty grams(90 stem explants) of inoculum in 1.5L medium was placed into 2.5L bioreactor with aeration rate of 0.5 v.v.m., which was proper for effective shoot formation. Adding MES as pH buffer to culture medium increased the numbers of shoot formation. Adding 5g/l of anti-vitrifying agent into culture medium was highly effective for diminishing the rate of vitrification in shoots formed.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.17-21
• /
• 2009

This experimental study was to determine the fitness on each cervical margin of recast using crown base metal alloy. The alloy used in this experimental study was a Ni-Cr alloy(Wirolloy, Bego, Germany) for the fabrication of full cast crown prosthesis. Twenty-five copings were divided into the five groups. And the group A, B, C, D and E were cording successively according to the frequency of recast to five times. Each specimen was recasted without adding new metal. The experimental results were as follows: 1. The group A and B showed good fitness had subtle differences in each cervical margin adaptation, in other words, the mesio and disto cervical margin showed worse adaptation than the bucco and linguo cervical margin. 2. The group C got good fitness in bucco and linguo cervical margins, but the mesio and disto cervical margin showed inaccurate fitness. And I could not get good casting bodies without adding new metal. 3. The group D and E showed bad fitness for each cervical margin. Therefore the group D and E lost its function as a dental restoration.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.213-220
• /
• 2012

In this study, we investigated the effect of natural vegetable treatment agent on the bleaching and damage of human hair during permanent wave formation. The vegetable treatment agent was prepared by fermenting the mixture of tea leaves (10g), black rice (100g), black bean (100g), corn (100g), malt (50g), and water(500g) at room temperature for 1 week. The degree of bleaching and damage was checked by Munsell value 'L' and morphological changes of hair in FE-SEM. When the hair was bleached, the Munsell value 'L' was almost same regardless of adding the vegetable treatment to the bleaching solution. But when the hair was permanently waved, the curl formation ability was high and the damage was low in the case of adding the vegetable treatment. This means that the vegetable treatment covers the scale of hair and protects the hair from the chemicals.

• Food Science of Animal Resources
• /
• v.35 no.2
• /
• pp.225-231
• /
• 2015

Fish sarcoplasmic protein (SP) obtaining from lyophilization was evaluated its effect on the qualities of the no-fat chicken sausages in the presence of microbial transglutaminase (MTG) as compared to sodium tripolyphosphate (STPP). The cooking yields of all sausage samples were not different. Expressible moisture (EM) of sausage samples was reduced by adding fish SP, while the lowest EM values were observed in sausage samples containing STPP. The pH values of sausage samples were increased with the addition of fish SP and STPP. Proximate analysis revealed that the moisture, fat, and protein contents of all samples were not different (p>0.05). Textural properties (TP), measured by texture profile analysis, showed that hardness of no-fat sausages increased upon adding fish SP. However, the highest TP values were found in sausage samples with STPP. The redness values were reduced in sausage samples with STPP, while other color values were not affected by STPP. Sensory evaluation revealed that sausages with fish SP were accepted at the higher level than that of control. However, sausage samples with STPP showed highest TP and acceptability. Thus, partial substitution of STPP by SP would be possible to reduce phosphate level in the chicken sausages.

• Journal of Animal Environmental Science
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2015

This study was conducted to determine the amount of manure production from Holstein dairy cattle raised in bedded pack barn and the appropriate bedding material removal time. Total six heads of dairy cows (about 715 kg weight) were raised in three pens (two heads per pen) for 62 days. Average daily production of manure containing sawdust bedding was 21.2 kg per head and that of manure excluding bedding was 18.7 kg. Moisture content of bedding materials were significantly increased up to 86% of water holding capacity (WHC) of sawdust during the first 30 days. It kept very stable level after 30 to 50 days. Theoretically, 30 days after adding fresh bedding seems to be proper removal time only based on WHC. On the other hand, from a practical perspective, maximum 50 days after adding new bedding would be fine by comprehensively considering various factors such as bedding material purchasing cost, feeding environment and manure treatment.

• Journal of Intelligence and Information Systems
• /
• v.6 no.2
• /
• pp.15-27
• /
• 2000

The paper proposes a hybrid fire fighting control intelligent system(H-FFIS) using rules and cases to detect fire in Integrated Platform Management System. By far most conventional systems have been based on rule-based system in which expert knowledges are expressed with production rules. It is hard to express the knowledges to detect fire with production rules only. The knowledges of fire detection are often based on previously encountered situations of fires. For improvement of system capability renewing and adding of rules is needed in an already build-up system and such adding and renewing procedures could hinder users from fluent utilization of the system. We design and implement H-FFIS. Compared with rule-based FFIS(Fire Fighting control Intelligent System), H-FFIS extended with case-based reasoning shows that the system proposed here can lead to an improvement in fire detection rate.

• Herbal Formula Science
• /
• v.25 no.2
• /
• pp.253-270
• /
• 2017

Ojectives : To indicate source of prescriptions in "Wenbingtiaobian" and draw pathologic consideration for differences between prescription and source. Methods : Analysed cause and mechanism of disease, pattern identification, treatment, prescriptions and medicinal herbs based on "Translation of Wenbingtiaobian", "Modern Shanhanlun", "Jinkuiyaolueyishi", "Medical collection of Yetianshi" and "Herbal Formula Science". Results : 64.5% of prescriptions in "Wenbingtiaobian" are derived from "Linzhengzhinanyian", "shanghanlun" or "Jinkuiyaolue". Prescriptions from "shanghanlun" or "Jinkuiyaolue" have been modified to fit for heat pattern differentiations, to expand or reduce their medicinal scope, to build up efficacy by adding cold herbs, herbs of nourishing yin, engendering fluid or outthrusting through the exterior, to diffuse water-dampness or warm yang by adding warm herbs. Prescriptions from "Linzhengzhinanyian" have been modified to eliminate cold-dampness, disperse and outthrust with lightness, tonify yin. Conclusions : Wenbingtiaobian" inherited "Linzhengzhinanyian", "shanghanlun" nd "Jinkuiyaolue" andchanged and developed them to cure the febrile disease in the aspect of prescription, mechanism of disease, pattern differentiation and treatment.

• Computers and Concrete
• /
• v.11 no.1
• /
• pp.63-73
• /
• 2013

In this study, the effect of reducing cement by proportional addition of waste powder rubber on the performance of concrete under impact three-point bending loading were investigated experimentally and numerically. Concrete specimens were prepared by adding 5%, 10% and 20 % of rubber powder as filler to the mix and decreasing the same percentage of cement. For each case, three beams of $50mm{\times}100mm{\times}500mm$ were loaded to failure in a drop-weight impact machine by subjecting them to 20 N weight from 300mm height, while another three similar beams were tested under static load. The bending load-displacement behavior was analyzed for the plain and rubberized specimens, under static and impact loads. A three dimensional finite-element method simulation was also performed by using LUSAS V.14 in order to study the impact load-displacement behavior, and the predictions were validated with the experimental results. It was observed that, despite decreasing the cement content, the proportional addition of powder rubber until 10% could yield enhancements in impact tup, inertial load and bending load.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.253-259
• /
• 2008

In this paper an optimum design of a lab-scale biofilter for absorbing ammonia has been proposed and analyzed. This biofilter is using pine chaff and wood shaving as filter materials. It is assumed that the biofilter can be used as a storage tank of swine manure slurry or swine stall. To evaluate the biofilter performance, the ammonia, mainly offensive odor ingredient, was measured. Swine compost was mixed with filter materials in ratio of 1:1 on weight base. Each test continued for 20 days. The ammonia emissions were reduced by 97.9% and 98.3% in case of using biofilter filled with pine chaff and compost, and wood shaving and compost, respectively. The system was tested with and without adding compost. It was found that the biofilter with wood shaving and compost has an ammonia removal efficiency of 94.1%, while biofilter with wood shaving only has 85.3%. The biofilter with wood shaving and compost showed 8.8% higher removal efficiency than that of wood shaving only. By mixing the compost, the number of microorganism was found to be about 2.3 times more than that of wood shaving only. Therefore it can be concluded that adding compost has a positive effect on the formation of microorganism.

• Journal of Powder Materials
• /
• v.9 no.5
• /
• pp.352-358
• /
• 2002

The effects of boron or manganese added as $B_4C$, Mn, $TiB_2$, B on TiC-30vo1.%$Ni_3Al$ cermet sintered at 1380 and $1400^{\circ}C$ for 1 hour, were examined in relation with shrinkage, relative density, microstructure, lattice parameter, hardness and fracture toughness ($K_{IC}$). The results are summarized as follows: 1) The highest shrink-age showed about 30.5% in the specimen added B$_4$C and the maximum relative density was about 99% in the specimen added $TiB_2$; 2) The grains of TiC were grown during sintering and made the surrounding structure by adding boron and manganese. The largest grain size showed about $2.8\mutextrm{m}$ in the specimen with boron sintered at $1400^{\circ}C$;3) The lattice parameter of TiC was about $4.325\AA$ and $Ni_3Al$ about $3.592\AA$ by adding other elements; 4) The highest hardness was about $1100kgf/\textrm{mm}^2$ in the specimen with B4C; 5) The fracture toughness ($K_{IC}$) showed about $15MNm^{-3/2}$ in the specimen added $TiB_2$.