• Advances in concrete construction
• /
• 제5권2호
• /
• pp.101-115
• /
• 2017

Cement kiln dust (CKD) is one of the most important waste materials in the cement industry. The large amount of this material, has encouraged researchers to propose new ways to recycle and reuse it. In this paper, effects of adding cement kiln dust to the ordinary Portland cement, on the physical and mechanical properties of ordinary and lightweight concrete were investigated. Results showed that concrete containing CKD, presents lower workability and modulus of elasticity; however, improvements in strength was observed by adding particular amounts of CKD. Eventually, it was found that adding 10% of cement weight CKD is the appropriate percentage for utilizing in manufacturing ordinary and lightweight concrete.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.42-49
• /
• 1997

This experimental study was performed to find fuel property variations of the ultrasonic energy adding gasoline and improve the spray characteristics of the multipoint injector for EFI engine. The cause and effect of the characteristic improvement of the ultrasonic energy adding fuel was found out by the chemical structure analysis (NMR, IR), distillation and viscosity test. The results are obtained that the chemical property of gasoline organizition was changed aromatics to paraffins and branch index as the physical characteristics of gasoline were improved by ultrasonic energy. There were higher distillation and lower viscosity in ultrasonic energy adding gasoline.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.193-196
• /
• 2001

XLPE is occasionally happened to deteriorate cable insulation characteristics. It is happened to do a breakdown state by the degradation of electrical characteristic and electrical breakdown strength. I prepared TR-XLPE (Tree-Retardant XLPE) as adding various additives to prevent its states. Various additives are treeing retardants, anti-oxidants. Treeing retardants three kinds of aromatic compounds as adding each additive. Anti-oxidants use quinone compound and cresol compound as adding each additive. In order to observe each electrical characteristics, I measured breakdown strength, relative dielectric constant$({\varepsilon}_r)$, dielectric loss tangent$(tan{\delta})$. TR-XLPE specimens as adding treeing retardants and anti-oxidants enhance breakdown strength, ${\varepsilon}_r$, $tan{\delta}$ than pure XLPE.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.101-108
• /
• 2004

A construction process consists of value adding activities and non-value adding activities, necessary or unnecessary. If construction personnel can eliminate inefficient and/or unnecessary activities within the process, they may have a great opportunity to improve their construction process. The Product Process Analysis (PPA) technique, which was developed in the manufacturing industry, can be applied for identifying wastes in the construction process and ultimately improving the process itself. It provides useful tools, such as a process chart worksheet and flow diagram, for mapping the flow of construction activities with predetermined standardized symbols. These tools make people understand the flow of activities more easily, identify value adding/non-value adding activities within the process, and areas where the process can be improved. The example applications of PPA are demonstrated in the paper through the case studies implemented on the construction process of structural steel. The results of case studies indicate that PPA technique was effective at identifying and removing wastes in the steel construction process. It is also found that PPA technique is more effective for improving highly repetitive construction processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.421-424
• /
• 2000

We have examined the impedance characteristics and the rate characteristics of LPB. As results, the impedance of LPB decreased with increased pressing rate of electrodes, adding amounts of PVdF and VGCF. And the rate characteristics of LPB increased with the a increase of pressure-rate, PVdF and VGCF contents. The rate characteristics of LPB was improved by pressing of electrode and adding of VGCF content. And specific capacity of anode was increased with adding amounts of PVdF. Higher pressing rate of electrodes, higher adding amounts of PVdF and VGCF was necessitated good rate characteristics for lithium polymer battery.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.57-62
• /
• 2008

Twelve mortars were mixed and tested to explore the effect of gypsum on the compressive strength development and shrinkage strain of alkali-activated mortars. Powder typed sodium silicate and ground granulated blast-furnace slag were employed as alkaline activator and source material, respectively, to produce cementless mortar. The main variables investigated were alkali quality coefficient combining the concentration of activator and main compositions in source material, and the adding amount of gypsum ranged between 1 and 5% with respect to the weight of binder. Initial flow, compressive strength development, modulus of rupture, and shrinkage strain behavior of mortar specimens were measured. In addition, the hydration production of alkali-activated pastes with gypsum was traced using X-ray diffraction and energy-dispersive X-ray analysis combined with scanning electron microscope image. Test results showed that the initial flow of slag-based alkali-activated mortar was little influenced by the adding amount of gypsum. On the other hand, the effect of gypsum on the compressive strength of mortar specimens was dependent on the alkali quality coefficient, indicating that the compressive strength increased with the increase of the adding amount of gypsum until a certain limit, beyond which the strength decreased slowly. Shrinkage strain of mortar tested was little influenced by the adding amount of gypsum because no ettringite as hydration product was generated. However, the adding of gypsum had a beneficial effect on reducing the microcrack in the alkali-activated mortar.

• 한국조리학회지
• /
• 제23권3호
• /
• pp.29-37
• /
• 2017

This study investigated the physicochemical and sensory characteristics of white bean paste prepared with various amounts of aronia powder (as ratios of 0%, 2%, 4%, 6%, 8%, 10%). The result shows that the pH of white bean paste decreased significantly with the addition of aronia powder. From chromatography, the brightness, L-value was decreased by increasing the adding rate of aronia powder. The a-value of sample group adding 2% of aronia powder was the highest and that of sample group adding 8% was the lowest (p<0.01). Sample group adding 8% of aronia powder achieved the highest appraisal from many factors, such as springiness, cohesiveness, chewiness, brittleness, and adhesiveness. The total polyphenols and anthocyanin contents were proportionally increased with increasing the level of aronia powder added in white bean paste. The antioxidant activity measured by DPPH and NSA radical scavenging activities was significantly higher than control and increased proportionally to the aronia powder concentration. The result of sensory test shows that sample group adding 6% of aronia powder achieved the highest. Based on the above results, this study suggests that the addition of 6% aronia powder may be the best substitution ratio for white bean paste of the improvement of sensory preference and antioxidant.

• 한국식품조리과학회지
• /
• 제21권6호통권90호
• /
• pp.859-866
• /
• 2005

The purpose of this study was to investigate the effects of the addition of various concentrations of antler powder on the physicochemical and sensory characteristics of mango jelly As for pH and viscosity of the mango jelly, antler powder added group showed higher pH and viscosity than that of control group. As for turbidity, absorbance increased significantly(p<.001) by the addition of antler while permeability decreased. The syneresis increased with the passage of time. According to sensory evaluation, Sleekness showed the highest by adding $0.2\%$ antler powder in mango jelly. The hunter color L and b value decreased significantly(p<.001) by adding antler powder. The mechanical properties such as hardness, springiness, cohesiveness and brittleness were highest by adding $1.0\%$ antler powder while gumminess was highest by adding $0.2\%$ antler powder in mango jelly. Overall quality, taste, appearance, texture were most superior by adding $0.2\%$ antler powder in mango jelly. From these test results, the optimum recipe for mango jelly added with antler powder was $0.2\%$ of antler powder, $10\%$ sugar, $\2%$ agar and 351.2ml of mango juice.

• 한국식품조리과학회지
• /
• 제8권4호
• /
• pp.405-410
• /
• 1992

경단의 기준 조리법 설정을 위해 조리과정에서 품질특성에 영향을 미친다고 생각되는 주요 요인간의 상호작용으로 침수시간과 물의 온도, 침수기간과 물의 양, 첨가하는 물의 양과 물의 온도, 첨가하는 물의 양과 반죽횟수, 첨가하는 물의 양과 소금의 양으로 나타났다. 그중 침수시간과 물의 온도 및 물의 양과의 상호작용은 제I보에서 검토하였고 첨가하는 물의 양과 반죽횟수와의 상호작용은 제II보에서 검토하였다. 다음은 첨가하는 물의 양과 물의 온도와의 상호작용이 경단의 기호성과 Texture에 어떤 영 향을 미치는가를 관능검사와 기계적 측정에 의하여 검토하였는데 그 결과는 다음과 같다. 1. 경단 반죽시 첨가하는 물의 양과 물의 온도와의 상호작용에 대한 관능검사 결과에서는 첨가하는 물의 양이 25%일때는 첨가하는 물이 냉수, 온수인 것과 상관없이 Grain, Softness, Moistness, Overall quality 에서 다른 시료보다 좋게 평가되었다. 2. 경단을 반죽할때 첨가하는 물의 양과 물의 온도를 달리한 시료들의 기계적인 측정치를 분산분석한 결과 첨가하는 물의 양은 Adhesiveness, 물의 온도는 Hardness, Cohesiveness, Springiness, chewiness, 물의 양과 물의 온도와의 상호작용에서는 Springiness를 제외한 모든 항목에서 유의적인 차이를 보였다. 3. 관능검사결과 좋게 평가된 시료들의 기계측정결과는 대체로 Hardness, Gumminess가 작고 Springiness, Adhesiveness, Cohesiveness, Chewiness가 큰 수치를 나타냈다. 본 결과와 제I, 제II보에서의 결과를 요약하여 보면 12시간 침수한 찹쌀에 25%의 온수(8$0^{\circ}C$)를 첨가시켜 50회이상 반죽한 경단을 만드는 것이 바람직한 것을 알수 있다. 본 연구에서 검토한 요인 이외의 요인인 첨가하는 물의 양과 소금의 양과의 상호작용에 대해 연구가 더 있어야 할 것이다.

• 대한간호학회지
• /
• 제28권2호
• /
• pp.256-269
• /
• 1998

The purpose of this study was to evaluate the usefulness of variables which were known to be related to blood pressure for discriminating between hypertensive and normotensive groups. Variables were obesity, serum lipids, life style-related variables such as smoking, alcohol, exercise, and stress, and demographic variables such as age, economical status, and education. The data were collected from 400 male clients who visited one university hospital located in Incheon, Republic of Korea, from May 1996 to December 1996 for a regular physical examination. Variables which showed significance for discriminating systolic blood pressure in this study were age, serum lipids, education, HDL, exercise, total cholesterol, body fat percent, alcohol, stress, and smoking(in order of significance). By using the combination of these variables, the possibility of proper prediction for a high-systolic pressure group was 2%, predicting a normal-systolic pressure group was 70.3%, and total Hit Ratio was 70%. Variables which showed significance for discriminating diastolic blood pressure were exercise, triglyceride, alcohol, smoking, economical status, age, and BMI (in order of significance). By using the combination of these variables, the possibility of proper prediction for a high-diastolic pressure group was 71.2%, predicting a normal-diastolic pressure group was 71.3%, and total Hit Ratio was 71.3%. Multiple regression analysis was performed to examine the association of systolic blood pressure with life style-related variables after adjustment for obesity, serum lipids, and demographic variables. First, the effect of demographic variable alone on the systolic blood pressure was statistically significant (p=.000) and adjusted $R^2$was 0.09. Adding the variable obesity on demographic variables resulted in raising adjusted $R^2$to 0.11 (p=.000) : therefore, the contribution rate of obesity on the systolic blood pressure was 2.0%. On the next step, adding the variable serum lipids on the obesity and demographic variables resulted in raising adjusted R2 to 0.12(P=.000) : therefore, the contribution rate of serum lipid on the systolic pressure was 1.0%. Finally, adding life style-related variables on all other variables resulted in raising the adjusted $R^2$to 0.18(p=.000) ; therefore, the contribution rate of life style-related variables on the systolic blood pressure after adjustment for obesity, serum lipids, and demographic variables was 6.0%. Multiple regression analysis was also performed to examine the association of diastolic blood pressure with life style-related variables after adjustment for obesity, serum lipids, and demographic variables. First, the effect of demographic variable alone on the diastolic blood pressure was statistically significant (p=.01) and adjusted $R^2$was 0.03. Adding the variable obesity on demographic variables resulted in raising adjusted $R^2$to 0.06 (p=.000) ; therefore, the contribution rate of obesity on the diastolic blood pressure was 3.0%. On the next step, adding the variable serum lipids on the obesity and demographic variables resulted in raising the adjusted $R^2$ to 0.09(p=.000) ; therefore, the contribution rate of serum lipid on the diastolic pressure was 3.0%. Finally, adding life style-related variables on all other variables resulted in raising the adjusted $R^2$ to 0.12 (p=.000) : therefore, the contribution rate of life style-related variables on the systolic blood pressure after adjustment for obesity, serum lipids, and demographic variables was 3.0%.