• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.23-26
• /
• 2002

In this paper, We have studied the CMP (chemical mechanical polishing) characteristics of diluted slurry by adding of raw alumina abrasive and annealed alumina abrasive. As a experimental results, we obtained the comparable slurry characteristics compared with original silica slurry in the view point of high removal rate and low non-uniformity. Therefore, we can reduce the cost of consumables(COC) of CMP process for ULSI applications.

• Macromolecular Research
• /
• 제17권1호
• /
• pp.37-43
• /
• 2009

To fabricate dental nanocomposites containing finely dispersed silica nanoparticles, nearly monodispersed silica nanoparticles smaller than 25 nm were synthesized without forming any aggregates via a modified sol-gel process. Since silica nanoparticles synthesized by the Stober method formed aggregates when the particle size is smaller than 25 nm, the synthetic method was modified by changing the reaction temperature and adding poly(1-vinyl-2-pyrrolidinone) (PVP) to the reaction mixture. The size of the formed silica nanoparticles was reduced by increasing the reaction temperature or adding PVP. Furthermore, the formation of aggregates with primary silica nanoparticles smaller than 25 nm was prevented by increasing the amount of PVP added to the reaction mixture. To enhance the dispersion of the silica particles in an organic matrix, the synthesized silica nanoparticles were treated with 3-methacryloxypropyltrimethoxysilane ($\gamma$-MPS). A dental nanocomposite containing finely dispersed silica nanoparticles could be produced by using the surface-treated silica nanoparticles.

• 농업과학연구
• /
• 제36권1호
• /
• pp.11-18
• /
• 2009

The purpose of this study is to examine a proper amount of addition and a proper point for addition of titanium dioxide for the manufacture of E0 type of urea-formaldehyde resin (UF). The reduction of free formaldehyde from UF resin treated particle board was also investigated. $TiO_2$ content was 0.5%, 1% and 3% on the dry basis of UF resin. UV light was used to initiate reaction. The results of this study are as follows: 1. During UF resin manufacturing process, the second adding step of urea was proper point for $TiO_2$ addition. 2. 1 % addition of $TiO_2$ gave good values for the Eo type urea-formaldehyde resin. 3. There was no significant difference between physical properties of particle board, but the higher the adding content of titanium dioxide resulted in the lower the mechanical properties.

• Structural Engineering and Mechanics
• /
• 제25권6호
• /
• pp.691-716
• /
• 2007

The purpose of the present work is to establish a method for predicting the location and depth of a crack in a circular cross section beam by only considering the frequencies of the cracked beam. An accurate knowledge of the material properties is not required. The crack location and size is identified by finding the point of intersection of pulsation ratio contour lines of lower vertical and horizontal modes. This process is presented and numerically validated in the case of a simply supported beam with various crack locations and sizes. If the beam has structural symmetry, the identification of crack location is performed by adding an off-center placed mass to the simply supported beam. In order to avoid worse diagnostic, it was demonstrated that a robust identification of crack size and location is possible if two tests are undertaken by adding the mass at the left and then right end of the simply supported beam. Finally, the pulsation ratio contour lines method is generalized in order to be extended to the case of rectangular cross section beams or more complex structures.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.6-9
• /
• 2015

Traditional project management theory is based on a three-dimensional life cycle approach where the project managerseeks to optimize the dimensions of cost-schedule-technical (quality or design). This paper reports the findings of a case study analysis of two complex mega-projects in Michigan which confirm the findings of previous research and illustrates the use of a framework for five-dimensional project management (5DPM) that is for conceptualizing a complex project's scope of work. The framework elevates the recognition that the project's social/political context and the financial arrangements create complexity adding two new dimensions. This paper also demonstrates a methodology to graphically display a project's complexity to better understand and prioritize the available resources. The result is a "complexity footprint" that may help a complex project manager identify the boundary between controllable and uncontrollable projects impacts. The paper finds that applying 5DPM to the two case study projects has given the project delivery team a tool which is actually adding value to the complex project management process.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.525-530
• /
• 2013

워크플로우의 표준인 BPEL은 프로그래밍 언어에 대한 이해도가 낮은 도메인 전문가도 손쉽게 비즈니스 흐름을 작성할 수 있다. 하지만 특정 도메인에서는 BPEL 문법에 없는 새로운 기능이 요구된다. BPEL 엔진이 새로운 기능을 처리하기 위해서는 새로운 BPEL 엔진을 개발하거나 기존의 BPEL 엔진에 기능을 추가해야 하는데 이는 비용이 많이 필요하다. 본 논문에서는 XML 스키마를 확장하여 XAS4B 문서를 제안하고 관점지향 프로그래밍 기법을 이용하여 BPEL 엔진에 새로운 기능을 추가하는 방법을 보인다. 관점지향 프로그래밍 기법은 직조를 이용하여 핵심관심사의 수정없이 횡단관심사를 추가할 수 있다. 본 연구에서는 기존의 BPEL 엔진으로 B2J (BPEL to JAVA)를 사용하는데 이 엔진은 BPEL 문서를 JAVA 프로그램으로 변환하고 이를 실행한다. 본 시스템은 B2J 엔진이 생성한 JAVA 프로그램을 핵심관심사로 새로운 기능을 처리하는 프로그램을 횡단관심사로 두 프로그램을 직조하여 BPEL 흐름에 새로운 기능의 흐름을 추가한다. 제안하는 방법은 BPEL의 새로운 기능을 추상적으로 제공하여 한 번 개발된 새로운 기능을 도메인 전문가가 재사용하기 손쉽다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.382-385
• /
• 2003

Chemical mechanical polishing(CMP) is an essential process in the production of copper-based chips. On this work, the stability of Hydrogen Peroxide($H_2O_2$) as oxidizer of Cu CMP slurry has been investigated. $H_2O_2$ is known as the most common oxidizer in Cu CMP slurry. Copper slowly dissolves in $H_2O_2$ solutions and the interaction of $H_2O_2$ with copper surface had been studied in the literature. Because hydrogen peroxide is a weak acid in aqueous solutions, a passivation-type slurry chemistry could be achieved only with pH buffered solution.[1] Moreover, $H_2O_2$ is so unstable that its stabilization is needed using as oxidizer. As adding KOH as pH buffering agent, stability of $H_2O_2$ decreased. However, stability went up with putting in small amount of BTA as film forming agent. There was no difference of $H_2O_2$ stability between KOH and TMAH at same pH. On the other hand, $H_2O_2$ dispersion of TMAH is lower than that of KOH. Furthermore, adding $H_2O_2$ in slurry in advance of bead milling lead to better stability than adding after bead milling. Generally, various solutions of phosphoric acids result in a higher stability. Using Alumina C as abrasive was good at stabilizing for $H_2O_2$; moreover, better stability was gotten by adding $H_3PO_4$.

• 동아시아식생활학회지
• /
• 제26권4호
• /
• pp.359-369
• /
• 2016

In this study Ragwort, which had various and excellent pharmacological activity, was selected as a functional material, and intended to present an optimum condition of Ragwort Injeolmi by the blanching method, commonly used in the field. The general components, antioxidation, and dietary fiber of Ragwort were analyzed, and produceableness of Ragwort added Injeolmi was reviewed through instrumental inspection and sensory evaluation of various adding ratio of lyophilized Ragwort power and Ragwort pre-processed by blanching. It was proved that the SOD-likely active of Ragwort was 45.69%, total poly- phenol content was 12.45 mg, and total flavonoid content was 10.25 mg. The pH of Injeolmi adding Ragwort powder showed an increasing trend in the order of 0%, 1%, 3%, 5%, while that of Injeolmi adding blanching Ragwort showed increasing trend in the order of 0%, 10%, 15%, 20%, and there were significant difference (p<0.001). The soluble solid content of all sample groups showed constant value, and it was understood that no sugar was added in the process. From chromatography measurement result, a-value (redness) of 1% sample group was the lowest, and there were significant differences among sample groups (p<0.001). During 3 days of storage period, total microbial count of Injeolmi showed increasing trend while the storage period was getting longer. From the acceptability test Injeolmi adding blanching Ragwort had shown generally higher value.

• 한국약용작물학회지
• /
• 제21권1호
• /
• pp.54-60
• /
• 2013

According to previous reports, antioxidant activities of Codonopsis lanceolata could be increased by a steaming process. This study was performed to improve its antioxidant activity and skin whitening activities of C. lanceolata by high pressure and stepwise steaming complex process. The complex processed C. lanceolata showed highest free radical scavenging acitivity as 45.21%, and for phenol and flavonoid contents, complex processed C. lanceolata contained higher than those from conventional extraction process or steaming process alone. The Cytotoxicity of all C. lanceolata extracts also showed low cytotoxicity against human fibroblast cell (CCD-986sk) as 4.49 ~ 10.40%. In whitening activity, high inhibition of tyrosinase activity was estimated as 25.08% by adding the extracts from complex process. We found that whitening and antioxidant activity of complex processed C. lancolata extract was higher than those obtained from conventional extraction and a steaming process because various kinds of antioxidant compounds could be easily released by combined process, compared to one of each process.

• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.181-196
• /
• 1998

The aim of this research is the development of a CAPP system which can use the old experience of process planning to generate a process plan for a new part and learn from its own experience using the concept of stratified case-based reasoning(CBR). A process plan is determined through the hierarchical process planning procedure that is based on the hierarchical feature structure of a part. Each part and case have their own multiple abstractions that are determined by the feature structure of the part. Retrieving the case in stratified case-based process planning is accomplished by retrieving the abstraction that is most similar to the input part abstraction in each abstraction level of the case-base. A new process plan is made by the adaptation that translates the old case's process plan into the process plan of a new part. Operations, machines and tools, setups and operation sequence in each setup are determined in the adaptation of abstraction using some algorithms and the reasoning based on knowledge-base. By saving a new part and its process plan as a case, the system can use this new case in the future to generate a process plan of a similar part. That is, the system can learn its own experience of process planning. A new case is stored by adding the new abstractions that are required to save as the new abstraction to the existing abstractions in the case-base.